Introduction
Thank you for choosing the BOTTMA Universal Remote Control. This manual provides essential information for the proper setup, operation, and maintenance of your new remote control. This remote is designed to be compatible with various EVPAD HD Network TV Box models, offering a convenient replacement solution. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Product Overview
Image: The BOTTMA Universal Remote Control, a black, sleek device designed for EVPAD HD Network TV Boxes.
The BOTTMA Universal Remote Control is a high-quality replacement remote specifically designed for EVPAD HD Network TV Box models. It features an ergonomic design for comfortable handling and intuitive button placement for easy navigation. This remote operates using infrared technology and requires two AAA batteries for power.
Key Features
- High-quality construction compatible with EVPAD HD Network TV Box models.
- No programming required; ready to use after battery insertion.
- Compatible with EVPAD models: 2S, 2S+, PRO, PRO+, PLUS 3, 3MAX, and others.
- Universal functionality for seamless control.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery cover.
- Insert two (2) 1.5V AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery cover securely.
Note: The remote control does not require any programming. It is ready for use immediately after battery installation.
Compatibility
This remote control is designed to be compatible with a wide range of EVPAD HD Network TV Box models. Confirmed compatible models include:
- EVPAD 2S
- EVPAD 2S+
- EVPAD PRO
- EVPAD PRO+
- EVPAD PLUS 3
- EVPAD 3MAX
If your EVPAD HD Network TV Box model is not listed, the remote may still be compatible due to its universal design. Please test its functionality.
Operating Instructions
Basic Functions
Once batteries are installed, point the remote control directly at your EVPAD HD Network TV Box. The remote operates via infrared (IR) signals, so ensure there are no obstructions between the remote and the TV box.
- Power Button: Press to turn the TV box on or off.
- Navigation Buttons (Arrow Keys): Use to move through menus and select options.
- OK/Enter Button: Confirms selections.
- Volume Up/Down: Adjusts the audio volume.
- Channel Up/Down: Changes channels (if applicable to your TV box's functionality).
- Number Buttons: For direct channel input or other numerical entries.
- Menu/Home Button: Accesses the main menu or home screen of your TV box.
- Back/Return Button: Returns to the previous screen or menu.
Refer to your EVPAD HD Network TV Box's specific user manual for detailed information on its functions and how they interact with a remote control.
Maintenance
Cleaning
To clean the remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the remote's surface or internal components.
Battery Replacement
Replace batteries when the remote's performance diminishes or it stops responding. Always replace both batteries at the same time with new 1.5V AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries according to local regulations.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the right polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote and the TV box.
- Make sure you are within the operating distance (approximately 12 meters).
- Buttons not working:
- Clean the remote control, especially around the buttons, to remove any dirt or debris that might be preventing proper contact.
- Intermittent response:
- This could indicate low battery power. Replace the batteries.
- Ensure direct line of sight to the TV box.
If you continue to experience issues after following these troubleshooting steps, please refer to the Warranty and Support section for further assistance.
Specifications
| Brand | BOTTMA |
| Model Number | EVPAD (Universal Remote) |
| Compatible Devices | EVPAD HD Network TV Box (2S, 2S+, PRO, PRO+, PLUS 3, 3MAX) |
| Connection Method | Infrared (IR) |
| Color | Black |
| Material | ABS Resin |
| Battery Type | 2 x 1.5V AAA Batteries (not included) |
| Operating Distance | Up to 12 meters |
| Package Size | Approximately 17.27 x 5.08 x 1.78 cm |
| Weight | Approximately 23 g |
Warranty and Support
Warranty Information
This BOTTMA remote control comes with a 90-day refund guarantee. If the remote control is found not to be suitable for your EVPAD HD Network TV Box within 90 days of purchase, please contact our customer support for a full refund.
Customer Support
For any questions, technical assistance, or warranty claims, please contact BOTTMA customer support through the retailer where you purchased the product. Please have your purchase details and product model information ready when contacting support.