Enbrighten Z-Wave Plus Smart Light Switch User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Enbrighten Z-Wave Plus Smart Light Switch. This device is designed to integrate seamlessly into your smart home system, offering convenient control over your lighting.

The Enbrighten Z-Wave Plus In-Wall Smart Switch with QuickFit and SimpleWire allows for wireless control and programmed settings of wall, ceiling, and accent lighting when paired with a compatible hub. It supports individual commands and scheduled operations for effortless home management. This smart switch can operate independently or integrate into multi-switch setups with required add-on switches (models 12728 or 46200), supporting up to four add-on switches per device.

Key Features:

• VOICE CONTROL: Compatible with Alexa & Google Assistant (requires a Z-Wave certified hub). Works with SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell HomeSeer, Harmony Home Hub Extender, Vera, and more.
• VERSATILE APPLICATIONS: Control remotely via smartphone and voice commands with a compatible hub, or use manual ON/OFF operation. Supports custom scenes, personalized scheduling, and convenient alerts. Seamlessly integrates into multi-switch setups with add-on switches.
• FULL-HOME COVERAGE: Z-Wave Plus is backward compatible with all previous Z-Wave generations, allowing network expansion. Controls indoor or outdoor fixtures and repeats your Z-Wave signal up to 150ft, extending range and enhancing control.
• EASY INSTALLATION: Requires indoor in-wall installation with hardwired connections. A NEUTRAL WIRE IS REQUIRED. Wallplate not included. Compatible with LED, CFL, incandescent, and halogen bulbs, as well as other devices. Operating temperature range: 32-104 degrees Fahrenheit.

Setup and Installation

Before beginning installation, ensure the power to the circuit breaker or fuse box is turned OFF. A neutral wire is required for proper operation. If you are unsure about any steps, consult a qualified electrician.

QuickFit and SimpleWire Design

This image illustrates the QuickFit and SimpleWire features of the Enbrighten Smart Switch. QuickFit design allows for easier installation in crowded switch boxes with 20% reduced housing and no break-off tabs. SimpleWire provides faster installation with auto-detect line/load and dual, offset ground ports.

Wiring Diagram and Dimensions

This image displays the physical dimensions of the smart switch and highlights features such as the LED Toggle Backlight (with 4 selectable indicator light options), SmartStart QR code for easy pairing, and S2 Security for advanced 128-bit encryption. It also shows the wiring terminals for Ground, Load or Line, and Neutral connections.

3-Way Ready and Bulb Compatibility

This image illustrates that the Enbrighten Smart Switch is 3-Way Ready, allowing control of lights, fans, or appliances from up to five locations. It also shows compatibility with dimmable, LED, CFL, incandescent, and halogen bulbs.

Operation

Once installed and paired with your Z-Wave certified hub, the Enbrighten Smart Switch offers various control options.

Voice Control Integration

This image demonstrates the voice control capability of the Enbrighten Smart Switch, compatible with Alexa and Google Assistant when connected to a Z-Wave hub. Users can trigger scenes and operate smart devices using voice commands.

Manual Control and Scene Customization

The switch supports manual ON/OFF operation directly from the toggle. For advanced control, you can set up custom scenes, personalized schedules, and convenient alerts through your compatible Z-Wave hub. This allows for automated lighting based on time of day, occupancy, or other smart home triggers.

For detailed instructions on pairing with your specific Z-Wave hub and setting up scenes, please refer to your hub's user manual or the Enbrighten support resources.

Maintenance

The Enbrighten Smart Light Switch is designed for long-term, reliable operation with minimal maintenance. Keep the switch and surrounding area clean and free of dust. Do not use abrasive cleaners or solvents. Ensure the switch is not exposed to moisture beyond its intended indoor use.

Troubleshooting

If you experience issues with your Enbrighten Smart Light Switch, consider the following common troubleshooting steps:

• Switch Not Responding: Ensure the circuit breaker is ON. Verify the neutral wire is correctly connected. Check if the switch is properly paired with your Z-Wave hub.
• Difficulty Pairing: Ensure your Z-Wave hub is in inclusion mode. Try moving the hub closer to the switch during pairing. Refer to your hub's manual for specific pairing instructions.
• Intermittent Connectivity: Z-Wave signals can be affected by distance and obstacles. Consider adding Z-Wave repeaters or other Z-Wave devices to strengthen your mesh network.
• Lights Flickering (if used with dimmable bulbs): Ensure the bulbs are compatible with smart switches. Some LED bulbs may require a minimum load or specific dimmer settings to prevent flickering.
• No Power to Switch: Double-check all wiring connections, especially the line and load wires, and ensure the neutral wire is securely connected.

For more advanced troubleshooting or persistent issues, please contact Enbrighten customer support.

Specifications

Warranty Information

The Enbrighten Z-Wave Plus Smart Light Switch comes with a limited lifetime warranty. For specific terms and conditions, please refer to the official warranty documentation provided with your product or contact customer support.

Support

For additional assistance, technical support, or to view the full user manual in PDF format, please use the resources below:

• Download User Manual (PDF)
• Visit the Enbrighten Store on Amazon