Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Nora M1 LED Series 1-inch Miniature Recessed Downlight. This can-less LED luminaire is designed for both remodel and new construction applications, suitable for indoor or outdoor dry locations. It features an integrated LED light source with a 3000K color temperature and offers dimming capabilities.
Please read this manual thoroughly before installation and retain it for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local and National Electrical Code (NEC) standards.
- If you are not familiar with proper electrical wiring connections, consult a qualified electrician.
- Do not install this fixture in wet locations. It is rated for dry locations only.
- Ensure the supply voltage is compatible with the fixture (120 Volts).
- Do not attempt to modify the fixture. Any modifications may void the warranty and create a safety hazard.
- This product is designed for use with IC-rated applications, meaning it is suitable for direct contact with insulation.
Package Contents
Verify that all components are present before beginning installation:
- 1x M1 LED Module with 6" Quick Connect
- 4x Plastic Downlight Trims (Round and Square, Black and White finishes)
- 4x Optics for desired beam spread
Image: The Nora M1 LED module, featuring a white square trim and an attached quick connect cable, ready for installation.
Image: A black round trim, one of the interchangeable options included with the Nora M1 LED downlight.
Image: A white square trim, one of the interchangeable options included with the Nora M1 LED downlight.
Setup and Installation
The Nora M1 LED Series downlight is designed for easy installation in both remodel and new construction applications without the need for a separate housing.
- Prepare the Opening: Create a suitable opening in the ceiling or mounting surface. Refer to local building codes for exact dimensions. The fixture is designed for a 1-1/2" trim size.
- Connect Wiring: Ensure power is OFF at the circuit breaker. Connect the 6" quick connect cable from the LED module to the appropriate electrical wiring in the junction box. Follow all local electrical codes.
- Select Trim and Optic: Choose one of the four provided plastic trims (round or square, black or white) and one of the four optics based on your desired aesthetic and beam spread.
- Attach Trim and Optic: Securely attach the selected optic and trim to the LED module. Ensure they are properly seated.
- Insert Fixture: Gently push the assembled LED downlight into the prepared opening until the trim sits flush with the ceiling surface. The spring clips will hold the fixture in place.
- Restore Power: Once the fixture is securely installed, restore power at the circuit breaker.
Image: A black square trim, demonstrating another aesthetic option for the Nora M1 LED downlight.
Operating Instructions
The Nora M1 LED Series downlight operates like a standard light fixture once installed. It is designed for dimmable functionality.
- Power On/Off: Use a standard wall switch to turn the light fixture on or off.
- Dimming: This fixture is compatible with Triac or ELV (Electronic Low Voltage) dimmers. For optimal performance, use a dimmer switch specifically designed for LED lighting. Consult the dimmer manufacturer's instructions for proper installation and operation.
Maintenance
The Nora M1 LED Series downlight requires minimal maintenance.
- Cleaning: Ensure power is disconnected before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
- LED Module: The integrated LED module is not user-serviceable. Do not attempt to open or replace the LED components.
Troubleshooting
If you experience issues with your Nora M1 LED Series downlight, refer to the following common troubleshooting steps:
- Light Does Not Turn On:
- Check if the power switch is in the "ON" position.
- Verify that the circuit breaker has not tripped.
- Ensure all electrical connections are secure.
- Light Flickers or Dims Incorrectly:
- Confirm that the dimmer switch is compatible with LED lighting (Triac or ELV).
- Ensure the dimmer is properly installed and wired according to its manufacturer's instructions.
- Some dimmers have adjustment settings for LED compatibility; consult your dimmer manual.
- Light Output is Low:
- If using a dimmer, ensure it is set to maximum brightness.
- Verify the correct optic is installed for the desired beam spread.
If these steps do not resolve the issue, contact Nora Lighting customer support or a qualified electrician.
Specifications
| Attribute | Value |
|---|---|
| Model Number | NM1-17030X2PBW |
| Brand | Nora Lighting |
| Light Source Type | Integrated LED |
| Color Temperature | 3000K |
| Wattage | 2 Watts |
| Lumens | 100 Lumens (up to 200 Lumens max output) |
| Color Rendering Index (CRI) | 90 CRI |
| Voltage | 120 Volts |
| Dimming | Triac or ELV Dimmable |
| Material | Plastic (Trims), Metal (Housing) |
| Trim Size | 1-1/2 inches |
| Product Dimensions | 1.25 x 1.63 x 1.25 inches |
| Item Weight | 0.18 Pounds (2.88 ounces) |
| Mounting Type | Adjustable Lighting, Can-less |
| Location Rating | Dry Locations |
| Special Features | Dimmable, Instant On |
| Certifications | Energy Star |
| UPC | 732180029938 |
Warranty and Support
For warranty information or technical support, please contact Nora Lighting directly. Refer to their official website or the product packaging for the most current contact details and warranty terms.
Nora Lighting Website: www.noralighting.com
