Color N Drive Touch Up Paint Kit Instruction Manual

Introduction

This instruction manual provides comprehensive guidance for using the Color N Drive Touch Up Paint Kit. Designed for compatible with BMW San Francisco Red Metallic (C34) vehicles, this kit effectively repairs stone chips, scratches, and other minor paint imperfections, restoring your vehicle's aesthetic appearance. Follow these instructions carefully to achieve optimal results.

Image: Overview of the Color N Drive Touch Up Paint Kit, showing various bottles, cloths, and sponges.

What's Included

Your Color N Drive Touch Up Paint Kit includes the following components:

• Paint (30ml / 1.01 fl oz) - Specifically matched to BMW San Francisco Red Metallic (C34).
• Correct N Clear Solution (50ml / 1.69 fl oz) - For correcting application errors.
• Paste (25ml / 0.84 fl oz) - For surface preparation or finishing.
• Wax (25ml / 0.84 fl oz) - For final protection and shine.
• Brushes (5 pcs) - For precise paint application.
• Microfiber Cloth (1 pc) - For cleaning and polishing.
• Surface Cleaning Cloth (1 pc) - For initial surface preparation.
• Sponge (1 pc) - For various application steps.
• Surface Leveling Sponge (1 pc) - For smoothing the painted surface.
• Gloves (2 pcs) - For hand protection during application.

Setup and Preparation

1. Vehicle Preparation: Ensure the vehicle surface is clean, dry, and free from dirt, dust, or grease. Wash the area thoroughly and allow it to dry completely.
2. Work Area: Perform the repair in a well-ventilated area, away from direct sunlight or extreme temperatures. Ideal temperature range is 60-75°F (15-24°C).
3. Safety: Wear the provided gloves to protect your hands.
4. Identify Color Code: Locate your vehicle's OEM color code to confirm it matches the kit's color (C34). Common locations for color codes are:
   • Glove box
   • Driver's Information Manual
   • Door jamb (driver's side)
   • Under the hood
   

   Image: Diagram illustrating common OEM color code locations on a vehicle, including the glove box and driver's information manual.
5. Shake Bottles: Vigorously shake all bottles (Paint, Correct N Clear, Paste, Wax) for at least 1-2 minutes before use to ensure proper mixing of components.

Operating Instructions

Follow these steps for effective scratch and chip repair:

Step 1: Touch Up (Paint Application)

Using one of the provided brushes, carefully apply a thin layer of the Paint to the defective area. Apply without hesitation to cover the scratch or chip. Avoid applying too much paint at once.

Image: A hand applying touch-up paint to a scratch on a red car's bumper using a small brush.

Step 2: Clean (Excess Removal)

After the paint has dried (refer to product specific drying times, typically a few minutes depending on conditions), use the Correct N Clear solution with the Surface Cleaning Cloth to gently clean any excess paint or overflows around the repaired area. This solution helps to blend the new paint with the original finish.

Image: A hand wiping away excess paint from a repaired area on a red car's bumper using a cloth.

Step 3: Polish

Once the area is clean and dry, apply a small amount of the Paste (or Carnauba-based polish if preferred) to the repaired spot using the Sponge or a clean microfiber cloth. Gently polish the area to achieve a smooth and uniform finish, blending it seamlessly with the surrounding paint.

Image: A gloved hand polishing a repaired section of a red car's bumper with a sponge.

Step 4: Finish (Wax Application)

For final protection and enhanced shine, apply the Wax to the polished area. Buff gently with a clean microfiber cloth until the surface is smooth and glossy. This step helps to protect the repaired area from environmental elements and further damage.

Image: A red car, showcasing the final result after the touch-up paint application process.

Maintenance

To ensure the longevity of your repair and the overall paint finish:

• Avoid washing the repaired area for at least 24-48 hours after application to allow the paint to fully cure.
• Regularly wash your vehicle with appropriate car wash soap and soft cloths to prevent dirt and grime buildup.
• Apply a protective wax or sealant periodically to maintain the paint's shine and protect against environmental damage.
• Inspect your vehicle regularly for new chips or scratches and address them promptly to prevent rust and further damage.

Troubleshooting

Specifications

• Brand: Color N Drive
• Model Number: CND20-BMW-231-BASIC
• Color: San Francisco Red Metallic (C34)
• Finish Type: Metallic
• Item Volume: 1.01 Fluid Ounces (Paint)
• Item Weight: 1.1 pounds (total package)
• Special Feature: Provides 100% color match guarantee with easy application for scratch and chip repair.
• Specific Uses For Product: Exterior automotive paint repair.
• Manufacturer: Color N Drive
• First Available Date: February 7, 2020

Warranty and Support

Color N Drive stands behind the quality of its products. This kit comes with a 100% Color Match Guarantee. We are committed to ensuring your satisfaction with our premium automotive paint kit.

If you encounter any issues, have questions, or are not satisfied with your purchase, please contact Color N Drive customer support. We are here to make it right and assist you with any concerns regarding the product's performance or application.

For further assistance, please refer to the contact information provided on the product packaging or the official Color N Drive website.

Application Examples

View examples of successful repairs using the Color N Drive Touch Up Paint Kit:

Image: Before and after comparison of a scratch repair on a white car.

Image: Before and after comparison of a scratch repair on a red car.

Image: Before and after comparison of a scratch repair on a blue car.

Image: Before and after comparison of a scratch repair on a grey car.