LIEBMAYA 778469150627
LIEBMAYA 2PCS Wireless Winch Remote Control Kit User Manual
Model: 778469150627
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LIEBMAYA 2PCS Wireless Winch Remote Control Kit. This kit is designed to provide convenient wireless control for 12V/24V winch systems, commonly used on trucks, Jeeps, SUVs, and ATVs. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Safety Information
- Always disconnect power to the winch system before attempting any installation or maintenance.
- Ensure all connections are secure and properly insulated to prevent short circuits.
- Do not operate the winch if the remote control or receiver is damaged.
- Keep hands and clothing clear of moving parts during winch operation.
- This product is intended for professional installation or by individuals with adequate electrical knowledge.
- Turn off the power switch on the handheld remote when not in use to prevent accidental activation.
Package Contents
Your LIEBMAYA Wireless Winch Remote Control Kit includes the following items:
- 2 x Wireless Receiver Control Boxes
- 2 x Handheld Wireless Remotes
- 2 x Key Fob Wireless Remotes
- Batteries (2 x 12V 23A for handheld remotes, 2 x 12V 27A for key fob remotes)
Image: Contents of the LIEBMAYA Wireless Winch Remote Control Kit.
Specifications
| Feature | Specification |
|---|---|
| Connection Voltage | 12V/24V DC |
| Remote Range | Up to approximately 50 feet (15 meters) |
| Handheld Remote Size | Approx. 45 x 105 mm |
| Receiver Controller Size | Approx. 45 x 60 mm |
| Handheld Remote Battery | 1 x 12V 23A (included) |
| Key Fob Remote Battery | 1 x 12V 27A (included) |
| Connectivity Technology | Infrared |
| Compatible Devices | Winch systems (e.g., Warn, Ramsey, Superwinch, Gorilla, Bulldog) |
Setup and Installation
Wiring Diagram
Follow the wiring diagram carefully to connect the receiver control box to your winch system. Ensure all connections are secure and match the polarity indicated.
Image: Receiver Box Wiring Connections.
Image: Overall Connection Diagram for Winch System.
Wiring Instructions:
- Red Wire (VCC +12V): Connect to the positive terminal of your 12V/24V power source (e.g., car battery).
- Black Wire (GND/Ground): Connect to the negative terminal of your power source or a suitable chassis ground point.
- Yellow Wire (IN): Connect to the 'IN' (winch-in) control wire of your winch control box/relay.
- White Wire (OUT): Connect to the 'OUT' (winch-out) control wire of your winch control box/relay.
- Blue Wire (Antenna): Position the antenna cable away from metal objects for optimal signal reception. Do not cut or shorten the antenna wire.
Battery Installation/Replacement
The remotes come with batteries pre-installed. If replacement is needed, follow these steps:
Image: Battery Replacement Guide.
- Handheld Remote: Requires one 12V 23A battery. Open the battery compartment on the back of the remote and replace the battery, ensuring correct polarity.
- Key Fob Remote: Requires one 12V 27A battery. Carefully open the casing to access the battery and replace it, observing polarity.
Dispose of old batteries responsibly according to local regulations.
Operating Instructions
Once the receiver is correctly installed and powered, you can operate your winch wirelessly using either the handheld remote or the key fob remote.
Handheld Remote Control
Image: Handheld Remote Control.
- Power Switch: Locate the ON/OFF power switch on the side of the handheld remote. Slide it to 'ON' to activate the remote. Always slide it to 'OFF' when not in use to conserve battery and prevent accidental operation.
- 'OUT' Button: Press and hold this button to extend the winch cable (winch out).
- 'IN' Button: Press and hold this button to retract the winch cable (winch in).
- Indicator Light: The remote features an indicator light that illuminates when a button is pressed, confirming signal transmission.
Key Fob Remote Control
Image: Key Fob Remote Controls.
- 'OUT' Button: Press and hold this button to extend the winch cable.
- 'IN' Button: Press and hold this button to retract the winch cable.
Note: The key fob remote does not have a separate power switch and is always ready for use when its battery is functional.
Maintenance
- Keep the remote controls and receiver clean and free from dirt, dust, and moisture.
- Regularly check the batteries in the remotes and replace them when the indicator light dims or the range decreases.
- Inspect all wiring connections periodically to ensure they remain secure and free from corrosion.
- Store the remotes in a dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Winch does not respond to remote. | Low or dead remote battery. Receiver not powered. Incorrect wiring. Remote out of range. | Replace remote battery. Check power connection to receiver. Verify all wiring connections according to diagram. Move closer to the receiver. |
| Short operating range. | Low remote battery. Antenna obstructed or improperly positioned. Interference from other electronic devices. | Replace remote battery. Ensure antenna is extended and clear of metal objects. Move away from sources of strong electromagnetic interference. |
| Winch operates intermittently. | Loose wiring connections. Weak battery. Receiver malfunction. | Check and secure all wiring connections. Replace remote battery. Contact customer support if problem persists. |
Warranty and Support
For any issues not covered in this manual or for warranty inquiries, please contact LIEBMAYA customer support through the retailer where the product was purchased. Please have your model number (778469150627) and purchase information ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.