Philips Universal Remote Control SRP3229G/27 Instruction Manual

1. Introduction

This instruction manual provides comprehensive guidance for setting up and operating your Philips 3-Device Universal Remote Control, model SRP3229G/27. This remote is designed to consolidate control of up to three audio and video devices, simplifying your home entertainment experience.

2. Key Features

Multi-Device Control: Operates up to three audio and video devices (TV, Blu-ray player, DVD player, cable/satellite receiver, soundbar, streaming media player).
Extensive Code Library: Compatible with major brands and thousands of audio/video devices. Note: Not compatible with radio frequency devices like Roku Streaming Sticks and Amazon Fire TV/Sticks.
Preprogrammed for Samsung and Roku: TV and STR device buttons are preprogrammed for immediate use with Samsung TVs and Roku streaming media boxes. Note: Not compatible with Roku Streaming Sticks.
Simple Setup: Features automatic code search and direct code entry programming.
Primary Audio Control: Adjust volume across all devices without switching modes.
Additional Functions: Includes Blu-ray/DVD player open/close button, advanced DVR functions, menu navigation, dash button for sub-channel access, and a streaming app hotkey.

3. Package Contents

Philips 3-Device Universal Remote Control (SRP3229G/27)
Instruction Manual (this document)
Remote Code List

Note: Two AAA batteries are required and not included.

4. Setup and Programming

4.1. Installing Batteries

Before first use, install two AAA batteries (not included) into the remote control. Ensure correct polarity (+/-) as indicated inside the battery compartment.

Philips Universal Remote Control with battery compartment open and two AAA batteries next to it.

Figure 1: Battery installation. Open the battery compartment cover and insert two AAA batteries, observing polarity markings.

4.2. Programming Your Remote (Direct Code Entry)

This method uses specific codes for your devices found in the included Remote Code List.

Locate Codes: Find the 4-digit codes for your device brand in the Remote Code List.
Enter Setup Mode: Press and hold the SETUP button until the red indicator light on the remote turns on, then release.
Select Device: Press and release the device button (TV, STR, or AUD) you wish to program. The red indicator light will blink once and remain on.
Enter Code: Using the number buttons, enter the first 4-digit code from your list. After entering the fourth digit, the red indicator light should turn off.
Test Device: Point the remote at your device and test its functions (e.g., Power, Volume, Channel). If the device responds correctly, programming is complete for that device.
Repeat if Necessary: If the device does not respond or functions incorrectly, repeat steps 2-5 using the next code for your brand until a working code is found.

Diagram showing the steps for programming the Philips Universal Remote Control.

Figure 2: Step-by-step guide for programming the remote control using direct code entry.

4.3. Programming Your Remote (Auto Code Search)

If you cannot find your device's code or prefer an automated method, use Auto Code Search.

Turn on Device: Ensure the device you want to program is turned on.
Enter Setup Mode: Press and hold the SETUP button until the red indicator light on the remote turns on, then release.
Select Device: Press and release the device button (TV, STR, or AUD) you wish to program. The red indicator light will blink once and remain on.
Start Search: Press and release the POWER button. The red indicator light will begin to blink continuously.
Wait for Response: The remote is now sending power codes. Point the remote at your device and wait for it to turn off. This may take several minutes.
Lock Code: Once your device turns off, immediately press and release the SETUP button to lock in the code. The red indicator light will turn off.
Test Device: Test the remote's functions with your device. If it works, programming is complete. If not, repeat the process.

4.4. Setting Up Primary Audio Control

This feature allows the volume buttons to control a specific device (e.g., your soundbar) regardless of which device mode the remote is currently in.

Enter Setup Mode: Press and hold the SETUP button until the red indicator light turns on, then release.
Select Audio Device: Press and release the device button (TV, STR, or AUD) that is programmed to control your primary audio device (e.g., soundbar or TV). The red indicator light will blink once and remain on.
Activate Primary Audio: Press and release the MUTE button, then press and release the VOL+ button. The red indicator light will blink twice and turn off.
Test: The volume buttons will now control the selected audio device in all modes.

Video 1: Official Philips Universal Remotes setup guide, demonstrating programming and primary audio control. This video is provided by Jasco Products Company, the manufacturer.

5. Operating Your Remote Control

Front view of the Philips Universal Remote Control showing all buttons and their labels.

Figure 3: Layout of the Philips Universal Remote Control, highlighting key buttons for operation.

Device Selection: Press the desired device button (TV, STR, AUD) to control that specific device. The remote will remain in this mode until another device button is pressed.
Power: Press the POWER button to turn the selected device on or off.
Volume Control: Use VOL+ and VOL- to adjust volume. If Primary Audio Control is set, these buttons will control the designated audio device regardless of the selected device mode.
Channel Control: Use CH+ and CH- to change channels on your TV or cable/satellite box.
Navigation: Use the directional pad (up, down, left, right) and OK button for menu navigation and selection.
Streaming App Hotkey: The dedicated streaming app button provides direct access to your smart TV's primary media platform (if supported by your device and programmed code).
DVR Functions: Utilize buttons such as RECORD, PLAY, PAUSE, STOP, FF (Fast Forward), REW (Rewind), SKIP for DVR or media player control.

6. Maintenance

Cleaning: Wipe the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Battery Replacement: Replace batteries when the remote's indicator light becomes dim or the remote stops responding consistently. Always replace both batteries at the same time with new AAA alkaline batteries.
Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

Problem	Solution
Remote does not operate your device.	Ensure fresh batteries are installed correctly. Verify the remote is pointed directly at the device and there are no obstructions. Re-program the remote using a different code from the code list for your device. Try the Auto Code Search method.
Some buttons do not work after programming.	The selected code may offer partial functionality. Try other codes for your device brand. Ensure the remote is in the correct device mode (TV, STR, AUD).
Red indicator light does not turn on.	Replace batteries with new ones. Ensure batteries are inserted with correct polarity.
Volume control does not work across all devices.	Ensure Primary Audio Control is set up correctly (refer to Section 4.4).

8. Specifications

Model: SRP3229G/27 (also known as SRP9263C/27)
Brand: Philips
Number of Devices: 3
Color: Graphite
Power: 2 x AAA Batteries (not included)
Dimensions: 1.4 x 2.4 x 7.7 inches
Weight: 4.6 ounces
Manufacturer: Jasco Products Company, LLC

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided in the original product packaging or visit the official Philips consumer electronics support website. Keep your purchase receipt for warranty claims.

Online resources for codes: www.byjasco.com/urccodes

Philips SRP3229G/27