Introduction
Thank you for choosing the ZURI Jordan Dining Chair. This manual provides essential information for the proper setup, use, and maintenance of your new dining chair. Please read these instructions carefully to ensure safe and optimal performance and to prolong the life of your product.
The Jordan Dining Chair features a modern design with a lightly padded seat upholstered in black leatherette and a subtle rounded backrest. It is supported by angular legs made of polished stainless steel.
Safety Information
Important Safety Warnings:
- Do not exceed the suggested weight capacity of 275 lbs (125 kg). Exceeding this limit may cause damage to the chair or personal injury.
- Ensure the chair is stable and properly placed on a level surface before use.
- Avoid sudden movements, standing on the chair, or applying excessive force that could compromise the chair's integrity.
- Keep children away from the chair during assembly (if applicable) and instruct them on safe usage.
- Regularly inspect the chair for any loose parts or damage. Do not use if damaged.
Setup
Unpacking and Initial Inspection
The ZURI Jordan Dining Chair comes fully assembled. No additional assembly is required.
- Carefully remove the chair from its packaging.
- Inspect the chair for any signs of damage that may have occurred during shipping. If any damage is found, do not proceed with use and contact customer support immediately.
- Ensure all protective materials are removed from the chair, especially from the polished stainless steel legs.
Placement
Place the chair on a flat, stable surface. For hard floors, consider using felt pads on the bottom of the chair legs to prevent scratches and reduce noise.
Image: Front view of the ZURI Jordan Dining Chair. This image shows the chair's overall design, including the black leatherette upholstery and the polished stainless steel legs.
Operating Instructions
The ZURI Jordan Dining Chair is designed for indoor dining use. To ensure proper operation and longevity:
- Use the chair for its intended purpose: seating at a dining table.
- Avoid rocking or tilting the chair on two legs, as this can lead to instability and potential injury or damage.
- Do not stand on the chair.
- When moving the chair, lift it rather than dragging it to prevent damage to the legs or floor.
Image: Side view of the ZURI Jordan Dining Chair. This view emphasizes the chair's profile, including the subtle curve of the backrest and the design of the polished stainless steel legs.
Maintenance
Cleaning the Leatherette Upholstery
- For general cleaning, wipe the leatherette surface with a soft, damp cloth.
- For spills, blot immediately with a clean, dry cloth. Do not rub.
- For stubborn stains, use a mild soap solution (e.g., diluted dish soap) on a soft cloth, then wipe with a clean, damp cloth to remove soap residue. Dry thoroughly.
- Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the leatherette.
- Keep the chair away from direct sunlight and heat sources to prevent fading and cracking of the upholstery.
Cleaning the Polished Stainless Steel Base
- Wipe the stainless steel legs with a soft, clean cloth.
- For fingerprints or smudges, use a stainless steel cleaner or a mixture of warm water and a few drops of mild dish soap. Apply with a soft cloth, wipe in the direction of the grain (if visible), and then dry with a clean, lint-free cloth to prevent water spots.
- Avoid abrasive pads or cleaners that can scratch the polished finish.
General Care
- Periodically check all connections and fasteners to ensure they are tight. Tighten if necessary.
- Protect the chair from sharp objects that could puncture or scratch the upholstery or frame.
Troubleshooting
If you encounter any issues with your ZURI Jordan Dining Chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles | Uneven floor surface; loose leg connections. | Move the chair to a level surface. Check and tighten any loose screws on the leg connections. |
| Squeaking noise | Loose connections; friction between parts. | Tighten all screws. If squeaking persists, apply a small amount of silicone lubricant to connection points. |
| Upholstery damage (scratches, tears) | Sharp objects; excessive force; pet damage. | Minor scratches may be buffed out with a leatherette repair kit. For significant damage, contact customer support for repair options or replacement. Prevent future damage by keeping sharp objects away. |
| Discoloration or fading | Exposure to direct sunlight or harsh chemicals. | Relocate the chair away from direct sunlight. Avoid using harsh cleaning agents. Discoloration due to prolonged exposure may not be reversible. |
If the problem persists or is not listed here, please contact ZURI customer support for further assistance.
Specifications
The following are the technical specifications for the ZURI Jordan Dining Chair:
- Model Name: Jordan Dining Chair
- Model Number: 810038930350
- Brand: ZURI
- Color: Black (Upholstery)
- Base Finish: Polished Stainless Steel
- Overall Dimensions (W x D x H): 17.7" x 22" x 35" (45 cm x 56 cm x 89 cm)
- Seat Height: 17.25" (43.8 cm)
- Seat Depth: 16.5" (41.9 cm)
- Materials: Leatherette upholstery, Foam fill material, Stainless Steel frame
- Suggested Weight Capacity: 275 lbs (125 kg)
- Item Weight: 16 lbs (7.26 kg)
- Assembly: No assembly required (fully assembled)
- Indoor/Outdoor Usage: Indoor only
Image: Dimension diagram of the ZURI Jordan Dining Chair. This diagram illustrates the key measurements including overall height (35"), width (17.7"), depth (22"), seat height (17.25"), and seat depth (16.5").
Warranty Information
Specific warranty details for the ZURI Jordan Dining Chair are typically provided at the point of purchase or included with the product packaging. For comprehensive warranty information, please refer to the documentation provided by your retailer or contact ZURI customer support directly. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance, or need to report an issue with your ZURI Jordan Dining Chair, please contact your retailer or the manufacturer, ZURI Furniture. You can typically find contact information on their official website or through your purchase documentation.
For the most up-to-date support information, please visit the official ZURI website or refer to the contact details provided with your purchase.