Job Smart Pro Series LED Weapon Light User Manual

Introduction

Thank you for choosing the Job Smart Pro Series LED Weapon Light. This high-performance tactical light is designed to provide reliable illumination for various applications. Featuring a powerful LED, durable aluminum construction, and versatile switching options, it is built for demanding environments. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Package Contents

Verify that all items listed below are present in your package:

• Job Smart Pro Series LED Weapon Light (TAC-360)
• 1x 3.7V Li-ion Battery
• Remote Pressure Switch
• Additional Tail Cap
• Weapon Mount

An image showing the Job Smart Pro Series LED Weapon Light, including the main light unit, a remote pressure switch, and a 3.7V Li-ion battery, all sealed in its retail blister packaging.

Features

• High Brightness: 360 Lumens output for powerful illumination.
• Extended Beam Distance: Illuminates objects up to 620 feet.
• Efficient Runtime: Up to 2 hours of continuous operation.
• Durable Construction: Made from high-quality Aluminum.
• Advanced LED Technology: Utilizes CREE LEDs for superior performance.
• Dual Water Resistance Ratings:
  • IPX6 rated when using the remote pressure switch.
  • IPX7 rated when using the standard tail switch.
• Versatile Switching: Includes a 2-function remote switch and an additional standard tail cap.
• Integrated Mount: Comes with a weapon mount for easy attachment.

Setup and Installation

1. Battery Installation

1. Unscrew the tail cap of the weapon light by turning it counter-clockwise.
2. Insert the included 3.7V Li-ion battery with the positive (+) end facing towards the head of the light.
3. Screw the tail cap back on clockwise until it is securely tightened. Ensure the O-ring is properly seated to maintain water resistance.

2. Attaching the Weapon Mount

1. Identify the appropriate rail or mounting point on your weapon.
2. Loosen the screws on the weapon mount.
3. Position the weapon light into the mount.
4. Secure the mount to your weapon's rail, then tighten the screws firmly to prevent movement during use.

3. Connecting the Remote Pressure Switch (Optional)

1. Unscrew the standard tail cap from the weapon light.
2. Screw on the remote pressure switch tail cap in its place, turning clockwise until secure.
3. Route the pressure pad cable to a convenient location on your weapon for easy access during operation. Use cable management clips if necessary (not included).

Operation

Using the Standard Tail Cap Switch

• Momentary On: Lightly press the button on the tail cap. The light will turn on as long as the button is held. Release to turn off.
• Constant On/Off: Fully press the button until it clicks. The light will remain on. Press again until it clicks to turn off.

Using the Remote Pressure Switch

• The remote pressure switch typically offers two functions: momentary on and constant on.
• Momentary On: Press and hold the pressure pad. Release to turn off.
• Constant On/Off: Press the dedicated constant-on button (if present on your remote switch) or double-tap the pressure pad quickly (functionality may vary by specific remote switch design).

Note: The remote pressure switch provides IPX6 water resistance, while the standard tail cap provides IPX7 water resistance. Choose the appropriate tail cap based on your environmental needs.

Maintenance

• Cleaning: Wipe the light with a clean, soft cloth. For stubborn dirt, use a slightly damp cloth. Do not use abrasive cleaners or solvents.
• O-Rings: Periodically inspect the O-rings for wear or damage. Apply a thin layer of silicone grease to maintain water resistance. Replace O-rings if damaged.
• Battery Care:
  • Remove the battery if the light will not be used for an extended period to prevent leakage.
  • Store batteries in a cool, dry place.
  • Dispose of depleted batteries according to local regulations.
• Storage: Store the weapon light in a dry, cool environment away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Jobsmart website. Keep your proof of purchase for warranty claims.

For further assistance, please contact Jobsmart Customer Service.