Fossil Neutra Quartz Chronograph Watch (Model FS5699) User Manual

1. Overview

The Fossil Neutra Quartz Chronograph Watch (Model FS5699) is a sophisticated timepiece designed for precision and style. It features a durable stainless steel case, a multi-function chronograph movement, and a comfortable mesh band. This manual provides essential information to ensure optimal performance and longevity of your watch.

Figure 1: Front view of the Fossil Neutra Quartz Chronograph Watch.

2. Product Components

Your Fossil Neutra watch includes the following key components:

• Watch Case: 44mm stainless steel case with a hardened mineral crystal lens.
• Dial: Black sunray dial with white accents, Roman numerals, and three subdials.
• Movement: Accurate Quartz chronograph movement.
• Crown: Used for setting time and date.
• Pushers: Two pushers for operating the chronograph functions.
• Band: Smoke gray stainless steel mesh bracelet with a self-adjustable sliding closure.
• Included Accessories: Warranty card, user manual, customized fit mesh band.

Figure 2: Side view illustrating the crown and pushers.

3. Setup

3.1 Band Adjustment

The smoke gray mesh band features a self-adjustable sliding closure for a customized fit. To adjust the band:

1. Locate the clasp on the mesh band.
2. Use a small tool (e.g., a flathead screwdriver or a spring bar tool) to lift the locking plate on the clasp.
3. Slide the clasp along the mesh band to achieve the desired length.
4. Press the locking plate back down firmly to secure the clasp in place.

Figure 3: Detail of the mesh band and adjustable clasp.

3.2 Setting Time and Date

To set the time and date on your watch:

1. Pull the crown out to position 2 (first click) to set the date. Turn the crown clockwise or counter-clockwise until the correct date is displayed in the date window.
2. Pull the crown out to position 3 (second click) to set the time. Turn the crown to move the hour and minute hands to the correct time. Ensure you account for AM/PM if the watch has a 24-hour subdial.
3. Once the time and date are set, push the crown back into position 1 (fully in) to start the watch and engage the movement.

4. Operating Instructions

4.1 Chronograph Function

Your watch is equipped with a chronograph (stopwatch) function. The three subdials track minutes, seconds, and 24-hour time.

• Start/Stop: Press the top pusher (A) to start the chronograph. Press it again to stop.
• Reset: While the chronograph is stopped, press the bottom pusher (B) to reset all chronograph hands to zero.

4.2 Subdials

The watch features three functional subdials:

• One subdial tracks the chronograph minutes.
• Another subdial tracks the chronograph seconds.
• The third subdial displays 24-hour time, useful for distinguishing AM/PM.

5. Maintenance

5.1 Cleaning

To maintain the appearance of your watch:

• Wipe the case and crystal with a soft, damp cloth.
• For the stainless steel mesh band, use a soft brush and mild soapy water to clean, then rinse thoroughly and dry completely.
• Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.

5.2 Water Resistance

Your watch is water resistant up to 50 meters (5 ATM / 165 feet). This means it is suitable for short periods of recreational swimming and showering. It is not suitable for diving or snorkeling.

Important: Do not operate the crown or pushers while the watch is wet or submerged, as this can compromise its water resistance.

5.3 Battery Replacement

The watch is powered by 1 product-specific battery (included). When the watch stops running or the second hand begins to jump in irregular intervals, it is time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

6. Troubleshooting

• Watch not running: Check if the crown is fully pushed in (position 1). If the watch still does not run, the battery may need replacement.
• Incorrect time/date: Refer to section 3.2 for instructions on setting the time and date.
• Chronograph not resetting to zero: If the chronograph hands do not reset to the 12 o'clock position, consult a watch technician for adjustment.

7. Specifications

Figure 4: General watch case size guide.

8. Warranty and Support

Your Fossil Neutra Quartz Chronograph Watch comes with a manufacturer's warranty. Please refer to the included warranty card for detailed terms and conditions. For further assistance, product support, or service inquiries, please visit the official Fossil website or contact their customer service department.