IKOHS NETBOT S12 Robot Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the IKOHS NETBOT S12 Robot Vacuum Cleaner. This intelligent cleaning robot is designed to provide efficient and convenient floor cleaning for your home. Featuring powerful suction, self-charging capabilities, and advanced anti-drop and anti-collision sensors, the NETBOT S12 is suitable for various floor types, from hard floors to carpets.

This manual provides essential information on how to set up, operate, maintain, and troubleshoot your robot vacuum cleaner to ensure optimal performance and longevity. Please read this manual thoroughly before using the product and keep it for future reference.

2. Important Safety Instructions

To reduce the risk of injury or damage, read these safety instructions carefully and keep them accessible during product use.

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Only use the original power adapter and charging dock provided by the manufacturer.
• Do not use the robot in environments with high temperatures or open flames.
• Do not allow the robot to pick up large objects, liquids, or burning materials (e.g., cigarettes, matches).
• Ensure the charging dock is placed on a flat surface against a wall, with no obstacles within 1 meter in front and 0.5 meters on either side.
• Before use, remove any loose cables, small objects, or fragile items from the cleaning area to prevent entanglement or damage.
• Do not immerse the robot or its charging dock in water or other liquids.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

3. Package Contents

Please check the contents of your package upon opening. If any items are missing or damaged, contact your retailer or IKOHS customer support.

• IKOHS NETBOT S12 Robot Vacuum Cleaner
• Charging Dock
• Power Adapter
• Remote Control
• Side Brushes (2 pairs)
• High-Efficiency Filter (pre-installed)
• Dustbin
• Water Tank with Mop Cloth
• Cleaning Tool
• User Manual

4. Product Overview

4.1 Robot Vacuum Top View

Description: This image shows the top surface of the black IKOHS NETBOT S12 robot vacuum cleaner, which is round and sleek. A remote control is placed on its surface. The robot features a power button and Wi-Fi indicator light on its top panel. The remote control has various buttons for navigation, cleaning modes, and scheduling.

• Power/Clean Button: Press to start/pause cleaning. Long press to power on/off.
• Wi-Fi Indicator: Shows connection status.
• Bumper: Detects obstacles.
• Dustbin/Water Tank Cover: Lifts to access the dustbin or water tank.

4.2 Robot Vacuum Bottom View

Description: This image displays the underside of the IKOHS NETBOT S12 robot vacuum. Visible components include two yellow side brushes, large drive wheels, a central main brush, and a blue microfiber mop cloth attached to the water tank at the rear. The charging contacts are also visible near the front.

• Side Brushes: Sweep debris into the cleaning path.
• Main Brush: Agitates and lifts dirt from floors.
• Drive Wheels: Allow the robot to move across various surfaces.
• Charging Contacts: Connect with the charging dock.
• Cliff Sensors: Detect drops and prevent falling down stairs.
• Universal Wheel: Provides directional movement.
• Mop Cloth & Water Tank: For wet mopping functionality.

4.3 Charging Dock

Description: The image shows the IKOHS NETBOT S12 robot vacuum cleaner positioned on its black charging dock. The robot is facing the dock, with its charging contacts aligned. The dock is compact and designed to allow the robot to self-charge.

• Charging Indicator Light: Shows charging status.
• Charging Contacts: Transfer power to the robot.
• Power Port: Connects to the power adapter.

5. Setup and Initial Use

5.1 Unpacking and Preparation

1. Remove the robot and all accessories from the packaging.
2. Remove any protective films or stickers from the robot and charging dock.
3. Attach the side brushes: Press the side brushes onto the square posts on the bottom of the robot until they click into place. Ensure the L and R markings on the brushes match the corresponding markings on the robot.
4. Prepare the cleaning area: Remove any power cords, small objects, or fragile items that could entangle the robot or be damaged during cleaning.

Description: This image shows a person's hand lifting the IKOHS NETBOT S12 robot vacuum cleaner, viewed from above. The robot's sleek black surface and compact design are visible, indicating its portability and ease of handling for setup or maintenance.

5.2 Charging Dock Placement

Place the charging dock on a hard, level surface against a wall. Ensure there is:

• At least 1 meter (3 feet) of clear space in front of the dock.
• At least 0.5 meters (1.5 feet) of clear space on either side of the dock.
• No direct sunlight or strong light sources near the dock, as this can interfere with the robot's navigation.

Connect the power adapter to the charging dock and plug it into a wall outlet. The indicator light on the charging dock will illuminate.

5.3 Initial Charging

Place the robot onto the charging dock, ensuring its charging contacts align with those on the dock. The robot will automatically begin charging. For first-time use, charge the robot for at least 6 hours to ensure the battery is fully conditioned.

The power button indicator on the robot will pulse during charging and turn solid when fully charged.

6. Operating Your Robot Vacuum

6.1 Powering On/Off

• Power On: Press and hold the Power/Clean button on the robot for 3 seconds until the indicator light turns on.
• Power Off: Press and hold the Power/Clean button on the robot for 3 seconds until the indicator light turns off.

6.2 Starting a Cleaning Cycle

Press the Power/Clean button on the robot or the "Auto" button on the remote control to start a cleaning cycle. The robot will automatically select a cleaning path based on its environment.

Description: This image shows the IKOHS NETBOT S12 robot vacuum cleaner actively cleaning a hard floor in a modern living room setting. The robot is positioned near a blue sofa with decorative pillows and wooden stairs in the background, demonstrating its ability to navigate and clean in typical home environments.

6.3 Cleaning Modes

The NETBOT S12 offers several cleaning modes to suit your needs, accessible via the remote control:

• Auto Cleaning: The robot cleans automatically, adjusting its path based on the environment. This is the default mode.
• Spot Cleaning: The robot intensely cleans a specific area in a spiral pattern. Useful for concentrated dirt.
• Edge Cleaning: The robot cleans along walls and furniture edges.
• Scheduled Cleaning: Set a specific time for the robot to start cleaning daily. Refer to the remote control section for scheduling instructions.

6.4 Using the Remote Control

The remote control allows for convenient operation and mode selection:

• Directional Buttons: Manually control the robot's movement.
• Start/Pause Button: Start or pause the current cleaning cycle.
• Home Button: Send the robot back to the charging dock.
• Mode Selection Buttons: Select Auto, Spot, or Edge cleaning modes.
• Schedule Button: Set or cancel scheduled cleaning times.

6.5 Mopping Function

To use the mopping function:

1. Open the water tank cover and fill the tank with clean water. Do not use detergents or harsh chemicals.
2. Attach the mop cloth to the bottom of the water tank.
3. Slide the filled water tank into the robot until it clicks into place.
4. The robot will now vacuum and mop simultaneously.
5. Important: Remove the water tank and empty it after each use to prevent mold and odors. Do not leave the water tank installed when the robot is charging or not in use for extended periods.

Description: This image shows a side view of the IKOHS NETBOT S12 robot vacuum cleaner, highlighting the transparent water tank attachment at its rear. The tank is designed to hold water for the mopping function, and a blue release button is visible on the side of the tank.

7. Maintenance and Care

Regular maintenance ensures your NETBOT S12 operates efficiently and extends its lifespan. Always power off the robot before performing any maintenance.

7.1 Emptying the Dustbin and Cleaning Filters

1. Press the dustbin release button and pull out the dustbin.
2. Open the dustbin cover and empty the contents into a trash bin.
3. Remove the primary filter and the high-efficiency filter. Tap them gently to remove dust. Do not wash the high-efficiency filter with water.
4. Rinse the primary filter and dustbin with water. Ensure they are completely dry before reassembling.
5. Reinstall the filters and dustbin into the robot.

Description: This image shows the IKOHS NETBOT S12 robot vacuum cleaner with its top lid open, revealing the internal compartment where the dustbin and water tank are housed. The clear plastic dustbin is visible, indicating easy access for emptying and cleaning.

7.2 Cleaning the Main Brush

1. Flip the robot over.
2. Remove the main brush cover by pressing the release tabs.
3. Lift out the main brush.
4. Use the provided cleaning tool to remove hair and debris wrapped around the brush.
5. Reinstall the main brush and its cover.

Description: This close-up image focuses on the side brush of the IKOHS NETBOT S12 robot vacuum cleaner, showing small debris (like seeds and black strands) collected near it. This illustrates the brush's function in sweeping dirt into the vacuum's path and highlights the need for regular cleaning.

7.3 Cleaning Side Brushes

Regularly check the side brushes for tangled hair or debris. If necessary, remove them by pulling them straight up and clean them. If they are worn or damaged, replace them with new ones.

7.4 Cleaning Sensors and Charging Contacts

Wipe the cliff sensors (on the bottom of the robot) and the charging contacts (on the robot and charging dock) with a clean, dry cloth. This ensures proper navigation and charging.

7.5 Cleaning the Mop Cloth and Water Tank

After each mopping session, remove the mop cloth and wash it thoroughly. Empty any remaining water from the water tank and allow it to air dry completely before storing or refilling.

8. Troubleshooting

If your robot vacuum encounters an issue, refer to the following table for common problems and solutions.

If the problem persists after trying these solutions, please contact IKOHS customer support.

9. Specifications

10. Warranty and Support

For warranty information, please refer to the warranty card included with your product or the purchase documentation. Warranty terms and conditions may vary by region and retailer.

If you encounter any issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact IKOHS customer support. You can usually find contact information on the official IKOHS website or through your retailer.

For more information, visit the official IKOHS website: www.ikohs.com