1. Introduction
Thank you for purchasing the Warehouse of Tiffany RL6806B-32CH Saturn's Ring Chandelier. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Important Safety Information
- WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about the installation process.
- Use only the specified bulb type and wattage to prevent fire or electrical hazards.
- Do not hang anything from the fixture.
- This fixture is designed for indoor use only.
2. Package Contents
Carefully unpack your chandelier and inspect all components for damage. Keep all packaging materials until you are satisfied with the product. The package should include:
- Chandelier Frame (Matte Chrome Orb Design)
- Crystal Accents (Teardrop and other decorative elements)
- Mounting Hardware (Canopy, Mounting Plate, Screws, Wire Nuts)
- Chain (63 inches long)
- Instruction Manual
- Note: Six 25-watt bulbs are NOT included and must be purchased separately.
Image: The Saturn's Ring Chandelier with its matte chrome orb frame and crystal accents, showing the overall design and components.
3. Setup and Installation
Professional installation is recommended for this chandelier. Ensure you have all necessary tools (screwdriver, wire strippers, electrical tape, ladder) before proceeding.
Installation Steps:
- Turn Off Power: Locate the circuit breaker controlling the light fixture and turn off the power. Verify power is off using a voltage tester.
- Prepare Mounting: Attach the mounting plate to the junction box in the ceiling using the provided screws.
- Adjust Chain Length: Determine the desired hanging height for your chandelier. The chain is 63 inches long and can be adjusted by removing links.
- Wire Connections: Carefully connect the chandelier's wires to the house wiring. Connect the black wire (live) from the fixture to the black wire from the junction box, the white wire (neutral) from the fixture to the white wire from the junction box, and the ground wire to the ground wire from the junction box. Secure connections with wire nuts and electrical tape.
- Secure Canopy: Slide the canopy up the chain and secure it against the ceiling, covering the junction box and wiring.
- Attach Chandelier Body: Carefully lift and attach the chandelier body to the chain.
- Install Bulbs: Screw in six 25-watt bulbs (not included) into the sockets.
- Attach Crystal Accents: Carefully attach the crystal teardrop accents and other decorative crystals to the chandelier frame as per the design.
- Restore Power: Turn the power back on at the circuit breaker and test the chandelier.
Image: The Saturn's Ring Chandelier elegantly installed in a modern dining space, showcasing its full aesthetic.
4. Operating Instructions
The Warehouse of Tiffany RL6806B-32CH Chandelier operates via a standard wall switch connected to your home's electrical system. Ensure the correct bulbs are installed for optimal performance and safety.
- Bulb Type: Requires six bulbs.
- Wattage: Each bulb should not exceed 25 watts.
- Power Source: Corded Electric, 120 Volts.
- Switching On/Off: Use the wall switch connected to the fixture to turn the chandelier on or off.
5. Maintenance
Regular maintenance will help preserve the appearance and functionality of your chandelier.
- Cleaning:
- Always turn off power at the circuit breaker before cleaning.
- Wipe the metal frame with a soft, dry cloth. Do not use abrasive cleaners or polishes as they may damage the finish.
- For crystal accents, use a soft, damp cloth with a mild glass cleaner. Dry immediately with a clean, lint-free cloth to prevent water spots.
- Bulb Replacement:
- Ensure power is off and bulbs have cooled completely before attempting to replace them.
- Unscrew the old bulb and screw in a new 25-watt bulb of the appropriate type.
6. Troubleshooting
If you encounter issues with your chandelier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Lights flicker. |
|
|
| Chandelier hangs unevenly. |
|
|
7. Specifications
| Brand: | Warehouse of Tiffany |
| Model Number: | RL6806B-32CH |
| Model Name: | Saturn's Ring 32-inch Chandelier |
| Color: | Gray / Silver (Matte Chrome Finish) |
| Material: | Crystal, Metal |
| Light Fixture Form: | Chandelier |
| Room Type: | Dining Room (Recommended) |
| Power Source: | Corded Electric |
| Number of Light Sources: | 6 |
| Voltage: | 120 Volts |
| Wattage (per bulb): | 25 watts (max) |
| Embellishment Feature: | Crystal |
| Mounting Type: | Hanging |
| Shade Dimensions: | 32 inches high x 32 inches wide |
| Chain Length: | 63 inches |
| Included Components: | Lighting Kit |
| Required Assembly: | Yes |
| Certifications: | ETL Listed |
| UPC: | 653341261885 |
8. Warranty and Support
According to the manufacturer's information, this product comes with No warranty. For any questions regarding installation, missing parts, or operational issues not covered in this manual, please contact Warehouse of Tiffany customer support through their official channels or the retailer where the product was purchased.
For further assistance, please visit the Warehouse of Tiffany Store on Amazon.
