Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Rough Country 50-inch Dual Row LED Light Bar with White DRL. This powerful off-road lighting solution features 43,200 lumens, 480 watts of Cree LED lighting, and a combo spot/flood beam pattern for versatile illumination. It is designed for durability with an IP67 waterproof rating and a robust die-cast aluminum housing.
Safety Information
Professional Installation Recommended: While this light bar is designed for straightforward installation, Rough Country recommends that a certified technician install complex automotive systems. Proper knowledge of installation procedures and post-installation checks is crucial for ensuring the integrity and operating safety of your vehicle's systems.
Regular Inspections: It is the owner's responsibility to check all bolts and nuts for tightness after the first 500 miles of use, and then every 1,000 miles thereafter. Regular inspection by a qualified mechanic is recommended for all vehicle systems, including lighting, every 3,000 miles.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
What's in the Box
Verify that all components are present before beginning installation:
- (1) 50-inch LED Light Bar
- (1) Wiring Harness with On/Off Switch
- (1) Light Bar Cover
- Swivel Mounting Brackets
- Hardware (bolts, nuts, washers)
Setup and Installation
The Rough Country 50-inch LED Light Bar is designed for versatile mounting on various off-road vehicles. The included wiring harness simplifies electrical connection.
Mounting
Utilize the provided end mounts and adjustable base mounts to secure the light bar to your desired location, such as bumpers, grilles, or roof racks. Ensure the mounting surface is stable and capable of supporting the light bar's weight. Tighten all hardware securely, but do not overtighten.
Image: Rough Country 50-inch LED Light Bar installed on the front of a Jeep, demonstrating the DRL function. The light bar is mounted horizontally across the grille area.
Image: Rough Country 50-inch LED Light Bar installed on the rear roofline of a utility vehicle, fully illuminated. This shows an alternative mounting position and the full light output.
Wiring
Connect the included wiring harness to your vehicle's electrical system. The harness features a three-way switch for easy control of the light bar's functions. Ensure all connections are secure and properly insulated to prevent short circuits and water intrusion.
Noise Silencers
The light bar includes Noise Silencers designed to reduce wind hum, whistles, and other aerodynamic noise that can occur with mounted LED light bars. Install these according to the separate instructions provided with the silencers to optimize noise reduction.
Installation Video Guide
Video: Official Rough Country video demonstrating the features and operation of DRL LED Light Bars and Pods, including the 50-inch model. This video provides visual guidance on the light functions and housing features.
Operating Instructions
Your Rough Country LED Light Bar offers both Daytime Running Light (DRL) functionality and full-power illumination, controlled by a three-way switch.
Three-Way Switch Operation
- Position I (DRL Mode): Activates the integrated Daytime Running Lights. These LEDs provide enhanced visibility for your vehicle during daylight hours, mimicking modern headlight DRL functions. The DRLs are available in cool white.
- Position O (Off): Turns the light bar completely off.
- Position II (Full Output Mode): Activates all 96 high-intensity 5-watt Cree LEDs, providing 43,200 lumens of illumination with a combo spot/flood beam pattern for maximum off-road visibility.
Image: Close-up of the Rough Country 50-inch LED Light Bar with the DRLs illuminated, showing a bright white strip of light along the center.
Image: Close-up of the Rough Country 50-inch LED Light Bar with the main LEDs off, highlighting the central DRL strip. This view emphasizes the distinct DRL feature.
Always select the appropriate lighting mode based on driving conditions and local regulations.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your LED light bar.
- Cleaning: Regularly clean the lens with a soft cloth and mild soap and water to remove dirt, mud, and debris. Avoid abrasive cleaners or harsh chemicals that could damage the polycarbonate lens.
- Housing: The durable die-cast aluminum housing is designed for maximum strength and heat dissipation. Periodically inspect the housing for any signs of damage or corrosion.
- Waterproof Rating: The light bar features an IP67 waterproof rating, providing reliable performance in harsh conditions. However, avoid directing high-pressure water jets directly at the light bar for extended periods.
- Moisture Breather Technology: This technology helps reduce moisture build-up inside the light bar. Ensure the breather is not obstructed.
- Snap-on Cover: Use the included snap-on cover to protect the lens when the light bar is not in use or during storage, especially from impacts or harsh elements.
- Hardware Check: As per safety guidelines, regularly check all mounting hardware for tightness.
Image: Rough Country 50-inch LED Light Bar with its protective snap-on cover installed. The cover helps shield the lens from damage when not in use.
Troubleshooting
If you encounter issues with your light bar, refer to the following common solutions:
- Light Bar Not Illuminating:
- Check all electrical connections for proper seating and corrosion.
- Verify the wiring harness fuse is intact.
- Ensure the three-way switch is in the correct position (DRL or Full Output).
- Confirm the vehicle's power source is active.
- Dim or Flickering Lights:
- Inspect wiring for loose connections or damage.
- Check for adequate voltage supply to the light bar.
- Clean the lens if it is obstructed by dirt or debris.
- Excessive Wind Noise/Hum:
- Ensure Noise Silencers are correctly installed and positioned.
- Verify the light bar is securely mounted and not vibrating.
- Adjust the mounting angle if possible to reduce aerodynamic drag.
- Moisture Inside Lens:
- Ensure the Moisture Breather is clear and unobstructed.
- If persistent, inspect the housing seals for damage.
For issues not resolved by these steps, or for complex electrical problems, it is recommended to consult a qualified automotive technician.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 70950BD |
| Length | 50-5/16" (1277.9mm) |
| Depth | 3.45" (87.6mm) |
| Height | 3" (76.2mm) |
| Lumen Output | 43,200 Lumens |
| Wattage | 480 Watts |
| LED Type | Cree LED (96 x 5W) |
| DRL LEDs | 48 Cool White DRL LEDs |
| Beam Pattern | Combo Spot (5°) / Flood (90°) |
| Color Temperature | 6000K |
| Operating Voltage | 10-30V DC / 12V |
| Amperage Draw | 40 Amps |
| Waterproof Rating | IP67 |
| Housing Material | Die-cast Aluminum |
| Lens Material | Polycarbonate |
| Special Features | Dust Proof, Rust Proof, Weather Resistant, White DRL, Moisture Breather Technology, Noise Silencers |
| Included Components | Light Bar, Wiring Harness with Switch, Light Bar Cover, Swivel Mounting Brackets, Hardware |
| Automotive Fit Type | Universal Fit |
Warranty Information
This Rough Country 50-inch Dual Row LED Light Bar is backed by a 3-year warranty. For specific terms and conditions, please refer to the official Rough Country warranty policy or contact customer support.
Customer Support
For technical assistance, warranty claims, or any questions regarding your Rough Country product, please visit the official Rough Country website or contact their customer service department. Ensure you have your product model number (70950BD) and purchase details available when contacting support.
Rough Country Website: www.roughcountry.com
