IKEA Fnurra Alarm Clock/Wake-up Light Instruction Manual

1. Introduction

The IKEA Fnurra Alarm Clock/Wake-up Light is designed to provide a gentle and gradual wake-up experience using both light and sound. It also functions as a night light, offering adjustable illumination. This manual provides essential information for the proper setup, operation, and maintenance of your Fnurra device.

2. Product Overview

3. Setup

3.1 Powering the Device

The Fnurra alarm clock can be powered by batteries or via a USB-C connection.

• Battery Installation: The clock requires 3 pieces of LADDA rechargeable battery HR6 AA 1.2V (sold separately). Open the battery compartment, insert the batteries according to the polarity indicators, and close the compartment securely.
• USB-C Power: Connect the included USB-C cord to the clock's USB-C port and plug the other end into a suitable power supply (e.g., a USB wall adapter, not included). The clock can operate while charging.

3.2 Initial Charge

For optimal performance, it is recommended to fully charge the batteries before first use if you are relying on battery power.

4. Operating Instructions

4.1 Setting the Time

Refer to the specific buttons on the device (often marked with '+' and '-' or a dedicated 'Set' button) to adjust the hour and minute. Consult the quick start guide included in the product packaging for precise button functions.

4.2 Setting the Alarm

• Press the alarm set button (if available) or navigate through the menu to the alarm setting.
• Adjust the desired alarm time using the '+' and '-' buttons.
• Select one of the 3 available alarm sounds.
• Confirm your alarm settings.

4.3 Snooze Function

When the alarm sounds, press the snooze button (often the main button on top or a dedicated snooze button) to temporarily silence the alarm. The default snooze duration is 7 minutes. This duration can be adjusted from 1 to 60 minutes through the clock's settings.

4.4 Night Light Function

The Fnurra can be used as a night light. You can:

• Set a specific time: Program the light to turn on or off at a desired time.
• Manual control: Turn the light on or off manually using the dedicated light button (often marked with a sun or light bulb icon).

4.5 Low Battery Indicator

When the battery level is low, a battery symbol will flash on the display, indicating that the device needs to be connected to a power supply for charging.

5. Maintenance

5.1 Cleaning

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.

5.2 Battery Replacement

If using non-rechargeable batteries, replace them when the low battery indicator flashes. If using rechargeable batteries, ensure they are properly charged. Always dispose of old batteries according to local regulations.

6. Troubleshooting

• Clock not turning on: Ensure batteries are correctly inserted and charged, or that the USB-C cable is securely connected to a power source.
• Poor battery life: Ensure you are using recommended LADDA rechargeable batteries. If using non-rechargeable batteries, replace them frequently. Consider keeping the device connected to a power supply via USB-C for continuous operation.
• Time inaccuracy: If the clock's time drifts, try resetting the time. Ensure the device has a stable power supply. If the issue persists, contact customer support.
• Alarm not sounding: Verify that the alarm is set correctly and enabled. Check the volume settings.
• Light not working: Ensure the night light function is activated or manually turned on. Check power supply.

7. Specifications

8. Warranty and Support

For information regarding warranty coverage and customer support, please refer to the documentation provided at the time of purchase or visit the official IKEA website. Keep your proof of purchase for any warranty claims.