1. Introduction
Thank you for purchasing the Russell Hobbs 16" Scandi Electric Pedestal Fan. This manual provides important information regarding the assembly, operation, maintenance, and safety of your new fan. Please read it thoroughly before use and retain it for future reference.
This fan features a slim, ergonomic floor-standing design with a white and wood effect finish, making it a stylish addition to any room. It offers three speed settings, four angled blades for powerful airflow, and adjustable tilt and oscillation functions to ensure optimal air circulation.
2. Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.
- Read all instructions before using the fan.
- Ensure the voltage indicated on the rating label matches your mains supply voltage.
- Do not immerse the fan, plug, or cord in water or any other liquid.
- Unplug the fan from the mains socket when not in use, when moving between locations, and before cleaning.
- Do not operate the fan with a damaged cord or plug, or after the fan malfunctions or has been dropped or damaged in any manner.
- Keep the fan out of reach of children and pets.
- Do not insert fingers or any other objects through the grille when the fan is operating.
- Place the fan on a stable, flat surface to prevent it from tipping over.
- Do not use the fan near windows, curtains, or other objects that may obstruct the airflow or be drawn into the fan.
3. Package Contents
Carefully unpack all components and check for any damage. If any parts are missing or damaged, contact customer support immediately.
- 1 x Fan Head Assembly
- 1 x Adjustable Stand Pole
- 1 x Base
- 1 x User Manual
Figure 3.1: Fan dimensions (H 100-125cm x W 45cm x D 41cm).
4. Setup and Assembly
Assembly is straightforward and typically takes 10-15 minutes. A Philips screwdriver is required for one screw.
- Attach the Stand Pole to the Base: Insert the bottom end of the adjustable stand pole into the base. Secure it firmly using the provided screw and a Philips screwdriver from underneath the base.
- Attach the Fan Head to the Stand Pole: Carefully align the fan head assembly with the top of the stand pole. Slide it down until it clicks into place or can be secured with the tightening knob.
- Adjust Height (Optional): Loosen the height adjustment knob on the stand pole, extend or retract the upper pole to your desired height (between 1m and 1.25m), and then tighten the knob securely.
Figure 4.1: Adjusting the fan height.
Figure 4.2: Fully assembled fan.
5. Operating Instructions
Your Russell Hobbs Pedestal Fan is designed for ease of use with simple controls.
- Power On/Off and Speed Control: Locate the rotary switch on the back of the fan head. Turn the knob clockwise to select your desired speed setting:
- 0: Off
- 1: Low Speed
- 2: Medium Speed
- 3: High Speed
- Oscillation Function: To activate the oscillation (side-to-side movement), push down the oscillation pin located on top of the motor housing. To stop oscillation and fix the fan in one direction, pull the pin up.
- Adjusting Tilt: The fan head can be tilted up or down to direct airflow. Gently push or pull the fan head to the desired angle.
Figure 5.1: Speed control and oscillation pin.
Figure 5.2: Fan features including oscillation and tilt.
6. Maintenance and Cleaning
Regular cleaning will help maintain your fan's performance and appearance.
- Always unplug the fan from the power outlet before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- For dust accumulation on the fan blades or inside the grille, use a vacuum cleaner with a brush attachment or a soft, dry cloth.
- Ensure no water or liquids enter the motor housing.
- Store the fan in a cool, dry place when not in use, preferably in its original packaging.
7. Troubleshooting
If you experience issues with your fan, consult the following table before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. | Check if the fan is plugged in and the power outlet is working. |
| Fan is not oscillating. | Oscillation pin is pulled up. | Push down the oscillation pin on top of the motor housing. |
| Weak airflow. | Fan speed is too low or grilles are obstructed. | Increase the fan speed. Clean any dust or debris from the grilles. |
| Unusual noise. | Loose parts or obstruction. | Unplug the fan and check for any loose parts or foreign objects. Ensure the fan is on a stable surface. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | RHMPF1601WDW |
| Power Source | Electric |
| Voltage | 2.4E+2 Volts (AC) |
| Wattage | 60 watts |
| Blade Length | 16 Inches |
| Product Dimensions (H x W x D) | 100-125 cm x 45 cm x 41 cm |
| Item Weight | 6.38 kg |
| Speed Settings | 3 |
| Special Features | Adjustable Height, Adjustable Tilt, Oscillating |
9. Warranty and Support
This Russell Hobbs Pedestal Fan comes with a 2-Year Guarantee upon registration. For peace of mind, please register your product as soon as possible after purchase.
For technical support, troubleshooting beyond this manual, or warranty claims, please refer to the contact information provided with your purchase receipt or visit the official Russell Hobbs website for customer service details.
