BAHCO Cordless Battery Powered Secateurs Instruction Manual

1. Introduction

Thank you for choosing the BAHCO Cordless Battery Powered Secateurs. This manual provides essential information for the safe and efficient operation, maintenance, and care of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

Figure 1.1: BAHCO Cordless Battery Powered Secateurs, showcasing its ergonomic design and powerful cutting blades.

2. Safety Information

Always observe basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.

• Read the Manual: Familiarize yourself with all controls and proper use.
• Wear Personal Protective Equipment (PPE): Always wear safety glasses, gloves, and appropriate clothing to protect against flying debris and sharp blades.
• Keep Hands Clear: Never place hands or fingers near the cutting blades when the tool is powered on or connected to a power source.
• Secure Work Area: Ensure the area is clear of bystanders, especially children and pets.
• Battery Safety: Use only the specified battery and charger. Do not expose batteries to extreme temperatures or moisture.
• Maintenance: Disconnect the battery before performing any maintenance, cleaning, or blade adjustments.

Figure 2.1: Close-up view of the secateur blade, highlighting the safety warning symbol. Always exercise caution around sharp blades.

3. Package Contents

Carefully unpack all items and check against the list below. If any items are missing or damaged, contact your retailer immediately.

• BAHCO Cordless Battery Powered Secateurs
• Rechargeable Battery (quantity may vary)
• Battery Charger
• Tool Kit (e.g., wrench, screwdriver)
• Lubricant
• Instruction Manual
• Storage Case

Figure 3.1: The complete package contents, including the secateurs, batteries, charger, and maintenance tools, neatly organized in the durable storage case.

4. Setup

Figure 4.1: Top view of the secateurs, showing the overall design and battery compartment location.

4.1 Charging the Battery

1. Connect the charger to a suitable power outlet.
2. Insert the battery into the charger. The indicator light on the charger will show the charging status.
3. Allow the battery to fully charge before first use. Charging time may vary.
4. Once fully charged, disconnect the battery from the charger.

4.2 Inserting the Battery

1. Ensure the secateurs are turned off.
2. Align the charged battery with the battery compartment at the base of the secateurs handle.
3. Slide the battery firmly into place until it clicks, indicating it is securely locked.

5. Operating Instructions

5.1 Powering On/Off

• To power on, press and hold the power button until the indicator light illuminates or the display activates.
• To power off, press and hold the power button again until the indicator light turns off or the display deactivates.

5.2 Cutting Operation

• With the tool powered on, position the branch or stem to be cut between the open blades.
• Ensure the material is within the maximum cutting capacity (1.25 inches / 32mm).
• Squeeze the trigger firmly to close the blades and make the cut. Release the trigger to open the blades.
• Avoid twisting the tool during a cut, as this can damage the blades or mechanism.

Figure 5.1: The secateurs in operation, showing the digital display which may indicate battery level or cut count.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your secateurs. Always disconnect the battery before performing any maintenance.

6.1 Blade Cleaning and Lubrication

1. After each use, clean sap and debris from the blades using a damp cloth and mild detergent. Dry thoroughly.
2. Apply a few drops of the provided lubricant or a suitable non-corrosive oil to the blade pivot point and cutting surfaces.
3. Operate the blades a few times to distribute the lubricant evenly.

Figure 6.1: Detailed view of the secateur blades and internal gears, emphasizing areas requiring regular cleaning and lubrication.

Figure 6.2: Close-up of the blade pivot point, a key area for lubrication to ensure smooth operation.

6.2 Battery Care and Storage

• Store the battery in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, charge the battery to approximately 50% capacity.
• Do not store the battery fully discharged or fully charged for extended periods.

6.3 General Storage

Store the secateurs in their original case in a dry, secure location, out of reach of children.

7. Troubleshooting

8. Specifications

9. Warranty and Support

BAHCO products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bahco website.

For technical support, spare parts, or service inquiries, please contact your authorized Bahco dealer or customer service department. Keep your purchase receipt and product model number (BCL20IB) handy when contacting support.