Bandai 1/144 HG OZ-06MS Leo Full Weapon Set Instruction Manual

1. Introduction

This manual provides instructions for the assembly, configuration, and care of your Bandai 1/144 High Grade OZ-06MS Leo Full Weapon Set. This kit allows you to build a highly detailed model of the mass-produced Mobile Suit Leo from "New Mobile Report Gundam W," complete with a comprehensive array of weapons and optional units for various combat scenarios.

The kit includes new parts such as a parachute pack and expressive hand parts, enabling a wide range of display options and scene recreations.

Figure 1.1: Packaging for the Bandai 1/144 HG OZ-06MS Leo Full Weapon Set.

2. Safety Information

• Small Parts: This product contains small parts and is not suitable for children under 8 years old. Keep out of reach of small children to prevent choking hazards.
• Sharp Edges: Some parts may have sharp edges or points. Exercise caution during assembly and handling.
• Tools: Use appropriate tools (e.g., hobby nippers, hobby knife) carefully. Adult supervision is recommended for younger builders.
• Ventilation: If using paints, glues, or markers, ensure adequate ventilation in your workspace.

3. Package Contents

Verify that all components listed below are present in your kit before beginning assembly. Refer to the included instruction booklet for a detailed visual parts list.

• OZ-06MS Leo Mobile Suit (main body)
• Dover Gun
• Bazooka
• Drum Gun (105mm Rifle)
• Beam Saber / Shield
• Long Beam Rifle
• Short Beam Rifle
• Mega Beam Cannon
• Colony Beam Rifle
• Various Shoulder Parts
• Various Backpacks
• Parachute Pack (new part)
• Hand Parts with Expressions (left and right, new parts)
• Flight Units
• Shoulder Cannons
• Optional Unit for Space

Figure 3.1: Overview of the included Mobile Suit body and various weapon and optional parts.

4. Setup and Assembly

Assembly of the Bandai HG OZ-06MS Leo Full Weapon Set requires careful attention to detail. Follow the step-by-step instructions provided in the dedicated instruction booklet included in your kit. The general process involves:

1. Preparation: Lay out all runners and identify parts according to the instruction booklet. Prepare your tools, such as hobby nippers for cutting parts from runners and a hobby knife for cleaning nubs.
2. Part Removal: Carefully cut each part from its runner using nippers. Avoid pulling or twisting, which can damage the plastic. Clean any remaining nubs with a hobby knife or sanding stick for a smooth finish.
3. Sub-Assembly: Assemble smaller sections first, such as limbs, torso, and head, as indicated in the manual.
4. Main Assembly: Connect the sub-assemblies to form the complete Mobile Suit body.
5. Weapon and Optional Unit Assembly: Assemble the various weapons, backpacks, and optional units separately.
6. Final Attachment: Attach the desired weapons and optional units to the completed Leo Mobile Suit.

Figure 4.1: Runners containing the model parts, as seen inside the product box.

Figure 4.2: Fully assembled OZ-06MS Leo Mobile Suit with standard equipment.

5. Operating and Weapon Configuration

The OZ-06MS Leo Full Weapon Set is designed for versatility, allowing you to equip your Mobile Suit with various armaments and optional units to recreate different combat scenarios from "New Mobile Report Gundam W."

5.1. Weapon Attachment

Weapons such as the Dover Gun, Bazooka, Drum Gun, Long Beam Rifle, Short Beam Rifle, Mega Beam Cannon, and Colony Beam Rifle can be held by the Leo's hands. The Beam Saber can be held or stored in the shield. The shield attaches to the forearm.

Figure 5.1: Leo Mobile Suit equipped with a rifle, demonstrating hand articulation.

5.2. Optional Unit Configuration

• Backpacks: Various backpacks are included, allowing for different mobility and weapon storage options. These attach to the back of the Leo.
• Flight Units: For atmospheric flight, attach the dedicated flight units to the backpack connection points.
• Shoulder Cannons: These can be attached to the shoulder hardpoints for increased firepower.
• Parachute Pack: The newly included parachute pack can be attached to the back for recreating descent scenes.
• Space Optional Unit: For space combat, utilize the specific optional unit designed for zero-gravity environments.

Figure 5.2: Multiple Leo units showcasing various weapon and equipment configurations.

Figure 5.3: Leo Mobile Suit equipped with a flight unit, ready for aerial maneuvers.

Figure 5.4: Leo Mobile Suit configured with the parachute pack and expressive hand parts.

6. Maintenance

Proper maintenance will ensure the longevity and appearance of your model kit.

• Cleaning: Dust your model regularly with a soft brush or compressed air. Avoid using harsh chemicals or abrasive materials, which can damage the plastic.
• Storage: Store your model in a cool, dry place away from direct sunlight to prevent discoloration and material degradation.
• Handling: Handle the model by its sturdy parts. Avoid excessive force on delicate joints or thin parts.

7. Troubleshooting

If you encounter issues during assembly or display, consider the following common solutions:

• Parts Not Fitting:
  • Ensure you are using the correct parts for the step. Refer to the instruction booklet.
  • Check for any remaining plastic nubs on the part or connection point that might be obstructing the fit. Carefully trim them.
  • If a joint is too tight, gently widen the peg hole slightly with a hobby knife or a small drill bit (use extreme caution).
• Loose Joints:
  • Apply a thin layer of clear nail polish or a specialized hobby joint tightener to the peg or inside the joint to increase friction. Allow to dry completely.
• Broken Parts:
  • For minor breaks, plastic cement or super glue can be used. Apply sparingly.
  • For significant breaks or missing parts, contact Bandai customer support for potential replacement options.

8. Specifications

9. Warranty and Support

Warranty: Specific warranty details for this product are not included in this manual. Please refer to the official Bandai website or contact their customer service for information regarding product warranties and replacement parts.

Customer Support: For further assistance, inquiries about missing parts, or technical support, please visit the official Bandai Hobby website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's official website.

You can visit the BANDAI Store on Amazon for more information on their products.