mooas Multi Clock Time Cube Timer MT-C2 User Manual

1. Introduction

The mooas Multi Clock Time Cube Timer is a versatile device designed for effective time management. It functions as both a digital clock and a pre-set timer, making it suitable for various activities such as cooking, studying, exercising, or managing work tasks. Its simple cube design and intuitive operation allow for quick and easy use.

2. Product Overview

Key Features:

• Pre-set Time Options: Available with 10, 30, 50, and 60 minutes.
• Dual Functionality: Operates as both a clock and a timer.
• LED Indicator: Blinks each second to show elapsed time.
• Easy Operation: Flip and turn to activate or pause.
• Alarm & Backlight: Audible alarm and illuminated display when time is up.
• Compact Design: Simple cube shape, ideal for various settings.

Components:

The mooas Multi Clock Time Cube Timer consists of a main cube unit with a digital LCD display on one face and pre-set time markings on other faces. The rear panel houses control buttons and the battery compartment.

The mooas Multi Clock Time Cube Timer, model MT-C2, in Neon Coral. This compact device functions as both a clock and a timer, featuring a digital display and pre-set time options on its sides.

3. Setup

Battery Installation:

1. Locate the battery compartment on the rear of the timer.
2. Open the compartment cover.
3. Insert two AAA batteries (not included), ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

The back panel of the mooas Time Cube Timer, revealing the battery compartment for two AAA batteries (not included) and control buttons for setting the clock and switching between 12/24-hour display.

Setting the Clock:

1. Ensure the switch on the back is set to 'Clock' mode.
2. Press the 'SET' button to enter time setting mode.
3. Use the arrow buttons to adjust the hour and minute.
4. Press 'SET' again to confirm each setting.
5. You can switch between 12-hour and 24-hour display modes using the appropriate button (refer to the back panel image).

The mooas Time Cube Timer in clock mode, showing the time 8:20. When not used as a timer, the device can display the current time in either 12-hour or 24-hour format.

4. Operating Instructions

Timer Mode:

1. Flip the switch on the back to 'Timer' mode.
2. Place the cube with the desired pre-set time (e.g., 10 min, 30 min) facing upwards.
3. The timer will automatically start counting down with an initial beep.
4. The LED indicator on each side will blink to show elapsed time.

This image illustrates the four pre-set timer durations available on the Neon Coral mooas Time Cube: 10, 30, 50, and 60 minutes. Each duration is clearly marked on a different face of the cube.

A user's hand is shown flipping the mooas Time Cube Timer to initiate a 10-minute countdown. The digital display shows '10:00' as the timer begins.

Pausing and Resuming the Timer:

• To pause the timer, turn the cube so that the LCD display faces upwards. The countdown will stop.
• To resume the timer, turn the cube so that the side with the active time duration faces upwards again. The countdown will continue from where it left off.

Alarm and Backlight:

• When the timer reaches zero, the backlight will turn on and an alarm will sound.
• The backlight remains on for 10 seconds, and the alarm rings for 1 minute.
• To stop the alarm, simply flip the cube to another side or turn it face down.

Demonstration Video:

5. Maintenance

• Clean the timer with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Do not immerse the device in water or expose it to excessive moisture.
• Replace batteries when the display dims or the timer functions become unreliable.

6. Troubleshooting

• Timer not starting: Ensure the switch on the back is set to 'Timer' mode and fresh AAA batteries are installed correctly.
• Display is dim or blank: Replace the AAA batteries.
• Alarm not sounding: Check battery levels. Ensure the timer is not in 'Clock' mode when the countdown finishes.

7. Specifications

This diagram provides the physical dimensions of the mooas Time Cube Timer, measuring 2.36 inches in depth, 2.36 inches in width, and 2.17 inches in height, highlighting its compact design.

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact mooas customer service directly through their official website or the retailer where the product was purchased.