1. Introduction
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Woodbridge Lighitng 13724STN-C20601 Mini-Pendant. This fixture features a satin nickel finish with faux opal glass shades, designed to enhance various interior spaces. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Key features of this pendant light include:
- Fixture Dimensions: 18 inches (Diameter) x 14 inches (Height)
- Adjustable cord with a maximum length of 72 inches
- Compatible with sloped ceilings
- Designed for indoor use
Image 1.1: Woodbridge Lighitng 13724STN-C20601 Mini-Pendant with three opal glass shades and satin nickel hardware.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Improper installation can result in electric shock or fire.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
- Consult a qualified electrician if you are unsure about wiring procedures.
- Ensure the fixture is properly grounded.
- Do not exceed the maximum wattage specified for the bulbs.
- Handle glass components with care to prevent breakage and injury.
- Keep flammable materials away from the light fixture.
3. Package Contents
Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
- Pendant Fixture Assembly (Canopy, Cords, Sockets)
- Glass Shades (3 pieces)
- Mounting Hardware Kit (Crossbar, Mounting Screws, Wire Nuts)
- Instruction Manual
4. Installation Instructions
Tools Required (Not Included): Screwdriver, Wire Strippers, Pliers, Electrical Tape, Safety Glasses.
- Turn Off Power: Before starting, ensure the power to the circuit at the main fuse box or circuit breaker is completely off.
- Prepare Mounting: Attach the mounting crossbar to the outlet box using the provided mounting screws. Ensure the crossbar is securely fastened.
- Adjust Cord Length: Determine the desired hanging height for each pendant. The cords are adjustable up to 72 inches. Carefully push or pull the cord through the canopy to achieve the desired length. Secure the cord in place within the canopy mechanism.
- Make Electrical Connections: Connect the fixture's wires to the corresponding house wires using wire nuts.
- Connect the bare copper or green ground wire from the fixture to the bare copper or green ground wire from the outlet box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the outlet box.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the outlet box.
- Mount Canopy: Carefully tuck all wires into the outlet box. Align the canopy with the mounting screws on the crossbar and secure it in place with the decorative nuts or screws provided.
- Install Glass Shades: Carefully attach each glass shade to its respective socket. Ensure they are securely fastened but do not overtighten.
- Install Bulbs: Screw in the appropriate light bulbs (not included) into each socket. Refer to the Specifications section for maximum wattage.
- Restore Power: Once installation is complete, restore power at the circuit breaker.
Image 4.1: Close-up view of the satin nickel hardware and faux opal glass shade, illustrating the connection point.
5. Operating Instructions
The Woodbridge Lighitng 13724STN-C20601 Mini-Pendant operates like any standard ceiling light fixture. Once properly installed and powered, it can be turned on and off using a wall switch connected to the circuit. Ensure the correct type and wattage of bulbs are installed for optimal performance and safety.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your pendant light.
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. For glass shades, a mild glass cleaner can be used, applied to a cloth, not directly to the shade.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow bulbs to cool completely before touching. Use bulbs that match the specified wattage and base type. This fixture uses bulbs up to 40 watts each.
- Inspection: Periodically check all electrical connections and mounting hardware for tightness.
7. Troubleshooting
If you experience issues with your pendant light, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off at the circuit breaker. 2. Loose wire connections. 3. Faulty bulb. | 1. Check circuit breaker and wall switch. 2. Turn off power, check and secure all wire connections. 3. Replace bulb with a new one. |
| Flickering light | 1. Loose bulb. 2. Loose wire connection. 3. Incompatible dimmer switch (if applicable). | 1. Tighten bulb. 2. Turn off power, check and secure wire connections. 3. Ensure dimmer switch is compatible with LED or incandescent bulbs as required. |
| Glass shade is loose | Shade not properly secured. | Carefully tighten the shade's retaining ring or mechanism. Do not overtighten. |
If the problem persists after attempting these solutions, consult a qualified electrician.
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | 13724STN-C20601 |
| Brand | Woodbridge Lighitng |
| Finish | Satin Nickel |
| Shade Material | Glass (Faux Opal) |
| Fixture Material | Alloy Steel, Glass |
| Fixture Dimensions (L x W x H) | 18" x 18" x 14" |
| Adjustable Cord Length | Up to 72 inches |
| Number of Light Sources | 3 |
| Max Wattage per Bulb | 40 watts |
| Voltage | 120 Volts |
| Power Source | AC |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
| Item Weight | 12 Pounds |
| UPC | 680587928494 |
9. Warranty and Support
This Woodbridge Lighitng product is covered by a 1-year limited manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear.
For warranty claims or technical support, please contact Woodbridge Lighitng customer service. Please have your model number (13724STN-C20601) and proof of purchase available when contacting support.