VASAGLE LSB50BX

VASAGLE Ottoman with Storage (LSB50BX)

User Manual

1. Introduction

Thank you for choosing the VASAGLE LSB50BX Ottoman with Storage. This versatile piece of furniture combines comfortable seating with practical storage, designed to complement various interior styles, including industrial and vintage aesthetics. This manual provides essential information for safe assembly, proper use, and maintenance of your new ottoman.

2. Safety Instructions

  • Maximum Load Capacity: Do not exceed the maximum static load capacity of 90 kg (198 lbs) for the seat and 20 kg (44 lbs) for the internal storage compartment. Overloading can cause damage or injury.
  • Stable Placement: Ensure the ottoman is placed on a flat, stable surface. Use the adjustable feet to compensate for uneven floors and prevent wobbling.
  • Assembly Safety: Follow all assembly instructions carefully. Do not overtighten screws. Keep small parts and packaging materials away from children.
  • Avoid Standing: Do not stand on the ottoman. It is designed for seating and storage purposes only.
  • Hinge Safety: Be cautious when opening and closing the lid to avoid pinching fingers.

3. Package Contents

Please verify that all components are present before beginning assembly:

  • 1 x VASAGLE LSB50BX Ottoman with Storage
  • 1 x Accessory Bag (includes screws, tools, and adjustable feet)
  • 1 x Assembly Instructions Manual

If any parts are missing or damaged, please contact customer support.

4. Setup and Assembly

The VASAGLE LSB50BX Ottoman is designed for straightforward assembly. All necessary tools and hardware are included.

  1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
  2. Identify Parts: Each component is labeled for easy identification. Refer to the included assembly diagram.
  3. Assemble Frame: Connect the metal frame components as per the instructions. Ensure all connections are secure but do not fully tighten screws until the entire frame is assembled.
  4. Attach Side Panels: Secure the vintage brown-black particle board side panels to the metal frame. Important: Pay close attention to the orientation of the side panels, especially where the lid hinges will attach. Incorrect orientation may lead to misalignment of hinge holes.
  5. Install Lid and Hinges: Attach the upholstered lid to the main body using the provided hinges. Ensure the hinges are properly aligned and secured.
  6. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the ottoman. Once assembled, adjust them to ensure the ottoman is level and stable on your floor.
  7. Final Tightening: Once all parts are correctly assembled, go back and fully tighten all screws.
Diagram showing the dimensions of the VASAGLE LSB50BX ottoman: 40 cm depth, 40 cm width, and 50 cm height.
Figure 4.1: Product Dimensions (40 x 40 x 50 cm)
Close-up of the adjustable foot on the VASAGLE ottoman, showing how it can be rotated to level the furniture.
Figure 4.2: Adjustable Feet for Stability

5. Operating Instructions

The VASAGLE LSB50BX Ottoman serves multiple functions:

  • Seating: Use the padded top as a comfortable seat in your hallway, bedroom, living room, or any other area where extra seating is desired.
  • Storage: Lift the upholstered lid to access the spacious internal storage compartment. This is ideal for storing blankets, books, magazines, small household items, or other clutter.
  • Surface: When closed, the flat top can also serve as a temporary surface for placing items like a cup of coffee, a book, or decorative objects.
The VASAGLE LSB50BX ottoman with its lid open, revealing the internal storage space. The upholstered black lid is propped open.
Figure 5.1: Ottoman with Lid Open, Showing Storage
The VASAGLE LSB50BX ottoman placed in a living room setting, serving as a side table with books and a cup on its closed upholstered top.
Figure 5.2: Ottoman in Use as Seating/Surface

6. Maintenance

To ensure the longevity and appearance of your VASAGLE Ottoman, follow these maintenance guidelines:

  • Cleaning the Upholstery: For the faux leather surface, wipe with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the material.
  • Cleaning the Frame and Panels: Use a dry or slightly damp cloth to wipe down the metal frame and particle board panels.
  • Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather and wood finish to fade or crack.
  • Check Connections: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
  • Hinge Lubrication: If the lid hinges begin to creak, apply a small amount of silicone-based lubricant to the hinge points.

7. Troubleshooting

ProblemPossible CauseSolution
Ottoman wobbles after assembly.Uneven floor or feet not adjusted.Adjust the individual adjustable feet until the ottoman is stable.
Lid hinges do not align or creak.Side panels incorrectly oriented during assembly or hinges need lubrication.Review assembly instructions for correct side panel orientation. If already assembled, check hinge alignment and apply lubricant if creaking.
Difficulty in assembly.Missing parts or unclear instructions.Double-check all parts against the package contents list. Refer to the detailed assembly instructions provided. Contact customer support if parts are missing or instructions are unclear.

8. Specifications

AttributeDetail
Model NumberLSB50BX
ColorVintage Brown + Black
MaterialsParticle Board, Steel, PU Faux Leather, Foam
Product Dimensions (D x W x H)40 x 40 x 50 cm (15.7 x 15.7 x 19.7 inches)
Item Weight9.4 kg (20.7 lbs)
Max. Static Load Capacity (Seat)90 kg (198 lbs)
Max. Static Load Capacity (Storage Box)20 kg (44 lbs)

9. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the purchase documentation or visit the official VASAGLE website. You can also contact the seller directly through the platform where you purchased the product.

VASAGLE Official Store: Visit the VASAGLE Store on Amazon

© 2025 VASAGLE. All rights reserved.

Related Documents - LSB50BX

Preview VASAGLE LSB061 Shoe Bench Assembly Instructions and Product Information
Detailed assembly guide and product information for the VASAGLE LSB061 Shoe Bench. Learn how to assemble your shoe bench with clear steps and part identification.
Preview VASAGLE Shoe Bench LSB064/164 Assembly Manual
Assembly instructions and safety guidelines for the VASAGLE Shoe Bench (Model LSB064/164). A comprehensive guide for proper setup, maintenance, and safety.
Preview VASAGLE Dresser LTS614 Assembly Instructions
Step-by-step assembly instructions for the VASAGLE Dresser (Model LTS614). Includes parts list, hardware guide, and safety warnings for proper installation.
Preview VASAGLE LTS316-S Dresser Assembly Instructions
Comprehensive assembly instructions for the VASAGLE LTS316-S Dresser. Includes parts inventory, hardware list, step-by-step assembly guide, and essential safety warnings.
Preview VASAGLE Dresser LTS416-S Assembly Instructions
Step-by-step assembly instructions for the VASAGLE Dresser (Model LTS416-S). Includes parts inventory, hardware list, and safety guidelines for proper setup.
Preview VASAGLE Hall Tree and Shoe Bench User Manuals
User manual and assembly instructions for VASAGLE Coat Rack (HSR41/041) and Shoe Bench (LMR32).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.