Product Overview
The hygger Mini Wave Maker is a smart, controllable powerhead designed to create natural ocean-like currents in saltwater and freshwater aquariums. It features an LED display controller for customizable flow modes, power, and frequency, helping to improve water quality and eliminate dead spots in tanks from 5 to 30 gallons.
Image: Hygger Mini Wave Maker with Eco DC Controller.
Product Components
The hygger Mini Wave Maker package includes the following components:
- Magnet Powerhead: The submersible pump unit responsible for water circulation.
- LED Display Controller: The external control unit for setting modes, power, and frequency.
- DC Adapter: Power supply for the wave maker.
Image: Individual components of the Hygger Mini Wave Maker system.
Setup Instructions
- Mount the Powerhead: Place the magnet powerhead inside your aquarium. Use the strong magnetic suction cup base to position it securely on the tank wall. Ensure the powerhead is fully submerged.
Image: Magnetic suction cup base for secure placement within the aquarium.
- Connect to Controller: Connect the powerhead cable to the designated port on the Eco DC Controller. Ensure the connection is secure.
- Connect Power Adapter: Plug the DC adapter into the controller, then plug the adapter into a power outlet. The LED display on the controller will light up.
For a visual guide on setup, please refer to the official product video below:
Video: Official setup and programming guide for the hygger Programmable Magnet Powerhead.
Operating Instructions
The Eco DC Controller allows for precise control over the wave maker's operation. The display shows four digital numbers indicating different settings.
Image: Detailed view of the Eco DC Controller panel.
- Setting Time and Mode (S Button): Press the 'S' button to switch into time mode. Use the '+' and 'M' buttons to adjust the real-time clock.
- Adjusting Power (Second Digital Number): The second digital number indicates the power level. You can set it from 40%, 60%, 80%, and 100% using the '+' button after selecting the power setting.
- Selecting Wave Mode (Third Digital Number): The third digital number indicates the wave mode. Options include Classic Wave, Nutrition Transmission Wave, Constant Stream, and Random Wave. Use the '+' button to cycle through modes.
- Adjusting Frequency (Fourth Digital Number): The fourth digital number indicates the frequency, from fastest (1) to slowest (8). Use the '+' button to adjust.
- Feeding Mode (F Button): Press the 'F' button to activate feeding mode. The powerhead will automatically shut off for 10 minutes to allow fish to feed undisturbed.
The wave maker is designed for quiet operation, ensuring minimal disturbance to your aquatic environment.
Image: The wave maker operating with minimal noise.
Maintenance
Regular maintenance ensures optimal performance and longevity of your wave maker. The unit is designed for easy disassembly for cleaning.
- Impeller Cleaning: Periodically remove the powerhead from the tank and disassemble the cage to access the impeller. Clean any debris or algae buildup from the impeller and its housing. The 360-degree motor fan design helps with water movement and prevents dead spots.
Image: Internal view of the wave maker's motor and impeller for cleaning.
- Magnetic Mount: Clean the magnetic suction cup base and the corresponding magnet on the outside of the tank to ensure a strong, secure hold.
Troubleshooting
If you encounter issues with your hygger Mini Wave Maker, consider the following common problems and solutions:
- Error Code 7: This error typically indicates an issue with the impeller being obstructed or not spinning freely.
- Unplug the unit.
- Remove the powerhead from the tank and carefully disassemble the impeller area.
- Check for any debris, sand, or foreign objects that might be blocking the impeller.
- Clean the impeller and its shaft thoroughly.
- Reassemble and restart the unit.
Image: Controller displaying an "Err 7" message.
- Reduced Flow: If the water flow is weaker than expected, ensure the impeller is clean and free of obstructions. Also, check that the power level setting on the controller is appropriate for your tank size.
- Unusual Noise: Excessive noise can be caused by debris in the impeller or improper seating of the powerhead. Clean the impeller and ensure the magnetic mount is firmly attached to the tank glass.
Specifications
| Feature | Specification |
|---|---|
| Brand | hygger |
| Model | 951 |
| Color | Black |
| Style | Submersible |
| Product Dimensions | 1.8"L x 1.8"W x 2"H |
| Power Source | Corded Electric |
| Item Weight | 9.88 ounces |
| Maximum Flow Rate | 1600 GPH (26.67 Gallons Per Minute) |
| Voltage | 12 Volts (DC) |
| Suitable Tank Thickness | Up to 1/2" |
| Min Power | 3 W |
| Max Power | 14 W |
Warranty and Support
For warranty information or technical support, please contact hygger customer service. Keep your purchase receipt as proof of purchase.
Visit the official hygger store for more products and support: hygger Store
