1. Introduction
This manual provides essential information for the safe and efficient operation of your Profi Cook PC-EWB 1187 Ice Cube Maker. Please read it thoroughly before first use and keep it for future reference. This appliance is designed for domestic use to produce ice cubes quickly and conveniently.
2. Safety Instructions
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.
- Read all instructions before operating the appliance.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Unplug from the outlet when not in use and before cleaning.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
- Ensure the voltage indicated on the appliance corresponds to your local mains voltage.
- Keep the appliance away from heat sources and direct sunlight.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Only use potable water in the water tank.
3. Package Contents
Please check the contents of the packaging upon unpacking:
- Profi Cook PC-EWB 1187 Ice Cube Maker Unit
- Ice Scoop
- Water Refill Container
4. Setup
- Unpacking: Carefully remove the ice cube maker from its packaging. Remove all packing materials, stickers, and labels.
- Initial Cleaning: Before first use, clean the water tank, ice basket, and ice scoop with warm water and a mild detergent. Rinse thoroughly and dry.
- Placement: Place the appliance on a stable, level surface, away from direct sunlight and other heat sources. Ensure there is adequate ventilation around the unit. Do not place it near appliances that generate heat.
- Power Connection: Plug the power cord into a grounded electrical outlet (220-240V, 50Hz).

The Profi Cook PC-EWB 1187 Ice Cube Maker features a sleek stainless steel finish with a control panel on the top front, including ON/OFF and MODE buttons, and indicators for ice size, ice full, and water empty.
5. Operating Instructions
- Fill Water Tank: Open the lid and fill the water tank with potable water up to the MAX fill line. The tank has a capacity of approximately 1.7 liters.
- Power On: Press the ON/OFF button on the control panel to turn on the appliance.
- Select Ice Cube Size: Press the MODE button repeatedly to cycle through the available ice cube sizes: Small (S), Medium (M), and Large (L). The selected size will be indicated on the display.
- Ice Production: The ice cube maker will begin the ice production cycle. The first batch of ice cubes is typically ready within 7-10 minutes, depending on the selected size and ambient temperature. The machine can produce approximately 10-15 kg of ice cubes in 24 hours.
- Indicators:
- Ice Full Indicator: An indicator light and an audible beep will signal when the ice collection basket is full. The machine will automatically pause production.
- Water Empty Indicator: An indicator light and an audible beep will signal when the water tank is empty. The machine will automatically pause production. Refill the water tank to resume.
- ECO Save Mode: The appliance features an ECO Save energy-saving mode, which automatically shuts off the unit when the ice collection basket is full, conserving energy.
- Removing Ice Cubes: Pull out the ice collection drawer to access the ice cubes. Use the provided ice scoop for hygienic removal.
- Power Off: Press the ON/OFF button to turn off the appliance when not in use.

The ice collection drawer slides out easily for convenient access to freshly made ice cubes. The machine produces bullet-shaped ice, which is ideal for various beverages.

Included accessories for the ice cube maker are a durable plastic ice scoop, designed for easy and hygienic retrieval of ice cubes from the collection basket.
6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and longevity of your ice cube maker.
- Daily Cleaning: After each use, drain any remaining water from the tank. Clean the water tank and ice basket with a soft cloth and warm, soapy water. Rinse thoroughly and dry.
- Exterior Cleaning: Wipe the exterior of the appliance with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Descaling: Depending on water hardness, descaling may be necessary periodically to prevent mineral buildup. Use a descaling solution suitable for kitchen appliances and follow the manufacturer's instructions.
- Storage: If the appliance will not be used for an extended period, drain all water, clean thoroughly, and store it in a dry, well-ventilated area.
7. Troubleshooting
If you encounter issues with your ice cube maker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No ice production | Water tank empty; Power not connected; Appliance malfunction. | Refill water tank; Check power plug; Contact customer support. |
| Ice cubes are too small or misshapen | Water temperature too high; Ambient temperature too high; Mineral buildup. | Use colder water; Ensure proper ventilation; Perform descaling. |
| Ice full indicator is on, but basket is not full | Sensor obstructed or dirty. | Clean the ice full sensor. |
| Appliance making unusual noise | Low water level; Component issue. | Check water level; If noise persists, contact customer support. |
8. Specifications
| Brand | Profi Cook |
| Model | PC-EWB 1187 |
| Dimensions (D x W x H) | 33.2 x 26 x 33.2 cm (approx. 39 x 31 x 34 cm overall) |
| Weight | 9 kg |
| Water Tank Capacity | 1.7 Liters |
| Ice Production Capacity | Approx. 10-15 kg / 24 hours |
| Voltage | 220-240 V~, 50 Hz |
| Wattage | 50 Watts |
| Material | Stainless Steel (housing), Plastic (internal components) |
| Refrigerant | R600a |

Detailed dimensions of the ice cube maker are provided to assist with placement and space planning. The unit measures approximately 332mm in height, 305mm in width, and 387mm in depth.
9. Warranty and Support
The Profi Cook PC-EWB 1187 Ice Cube Maker comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. EU spare part availability duration is 2 years.
For technical support, service, or spare parts, please contact your retailer or the Profi Cook customer service department. Keep your proof of purchase for warranty claims.


