Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BOBO BM6 Jaw-Grip Wireless Charger Bike Phone Holder. This device is designed to securely hold your smartphone on bicycles, motorcycles, and scooters, offering convenient access to navigation and communication while on the go, along with integrated wireless charging capabilities.
Box Contents
Please verify that all the following items are included in your package:
- Main Unit (with 1.5 meter wire)
- Rearview Mirror Mount (for scooters)
- Hex Key
- Spare Fuse
- 22 mm diameter plastic spacer
- 25 mm diameter plastic spacer
- 32 mm metal buckle (for bike handlebar)
- 2 x Ties (for tying wires)
- 3M Tape
Figure 1: Contents of the BOBO BM6 package.
Setup and Installation
Follow these steps to properly install your BOBO BM6 phone holder:
- Choose Mounting Option:
For motorcycles and bicycles, use the 32 mm metal buckle to fix the main unit to the handlebar. Select the appropriate plastic spacer (22 mm or 25 mm) based on your handlebar's diameter for a secure fit. Use the provided hex key to tighten.
For scooters, utilize the rearview mirror mount. - Attach Main Unit:
Once the mount is secured, attach the main unit to the knob on the mount. Apply gentle force if needed. Adjust the angle for optimal viewing comfort and then tighten the screw properly to secure the position. - Wire Connection:
Route the 1.5-meter wire through your bike's frame and connect it to the vehicle's battery. It is recommended to seek assistance from a bike mechanic for proper and safe electrical connection. Ensure the spare fuse is installed in the wire for protection. - Cable Management:
Use the provided ties to secure the wires, preventing them from touching hot engine parts or moving components, which could cause damage.
Figure 2: Installation steps for the BOBO BM6 phone holder.
Operating Instructions
Operating your BOBO BM6 phone holder is straightforward:
- Power On/Off:
Locate the ON/OFF switch on the back side of the main unit. Flip the switch to the 'ON' position to activate the wireless charging function. A blue LED will glow when the charger is active. Flip to 'OFF' when not in use to conserve battery. - Adjust Jaw-Grip:
Rotate the knob on the right side of the main unit to open or close the jaw-grip arms. The holder accommodates phones with screen sizes from 4.0 to 7.0 inches. - Secure Your Phone:
Place your mobile phone into the holder. Rotate the knob tightly enough to grip your phone strongly and securely. Ensure the phone is centered for optimal wireless charging. - Wireless Charging:
Once your phone is securely placed and the unit is powered on, compatible smartphones will begin wireless charging automatically. The 15W fast wireless charger provides efficient power delivery. - Adjust Viewing Angle:
The holder features 360-degree rotation, allowing you to adjust your phone to any desired angle for navigation or viewing.
Figure 3: Adjusting the jaw-grip for different phone sizes.
Figure 4: Phone mounted and used for GPS navigation.
Maintenance
To ensure the longevity and optimal performance of your BOBO BM6 phone holder, follow these maintenance guidelines:
- Cleaning: Regularly wipe the holder with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Check Connections: Periodically inspect all mounting screws and electrical connections to ensure they remain tight and secure. Loose connections can affect stability and charging performance.
- Wire Inspection: Check the wiring for any signs of wear, fraying, or damage. Replace the fuse if it blows.
- Jaw-Grip Mechanism: Ensure the jaw-grip mechanism operates smoothly. If it becomes stiff, clean any debris and ensure the knob rotates freely.
- Water Resistance: While the product is water-resistant, avoid prolonged exposure to heavy rain or submerging the unit in water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Phone not charging wirelessly. |
|
|
| Phone feels loose or falls out. |
|
|
| Holder is unstable on the handlebar. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | BOBO |
| Model Name | BM6 - Fast 15W Wireless Charger |
| Model Number | BB-BM-006 |
| Colour | Blue |
| Compatible Devices | Smartphones |
| Compatible Phone Models | Motorola, Samsung, iPhone (4.0 - 7.0 inch screen) |
| Mounting Type | Handlebar, Rearview Mirror |
| Product Features | Heavy Duty Protection, Travel, Universal, 15W Fast Wireless Charging, 360-degree Rotation, Shock Absorbing Damper Ball |
| Maximum Weight Capacity | 500 Grams |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Bicycle, Motorcycle, Scooter |
| Item Dimensions (L x W x H) | 15.5 x 9.5 x 6 Centimeters |
| Item Weight | 150 Grams |
| Enclosure Material | Polycarbonate |
| Country of Origin | China |
Warranty and Support
Warranty: This product comes with a 1 Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
Customer Support: For any queries, technical assistance, or warranty claims, please contact NG DIGITAL SOLUTIONS PRIVATE LIMITED.
Customer Care No.: 9902229003
Manufacturer Contact Information: NG DIGITAL SOLUTIONS PRIVATE LIMITED, 379, Rajpalya, ITPL Main Road, Bangalore-560048.