Hermitshell 200107

Hermitshell Hard Travel Case for POWERADD EnergyCell II 10000 Portable Charger User Manual

Model: 200107

1. Introduction

This manual provides instructions for the Hermitshell Hard Travel Case, Model 200107. This protective case is specifically designed to securely store and transport your POWERADD EnergyCell II 10000 portable charger, safeguarding it from physical damage during travel or storage.

2. Product Features

  • Durable Protection: Constructed from high-quality EVA material to protect against bumps, dents, and scratches.
  • Custom Fit: Precisely molded to fit the POWERADD EnergyCell II 10000 portable charger.
  • Compact Design: Lightweight and portable for easy carrying.
  • Secure Closure: Features a reliable zipper closure to keep contents secure.
  • Internal Mesh Pocket: Includes a mesh pocket for small accessories like cables.

3. Setup

The Hermitshell Hard Travel Case requires minimal setup. It is ready for use directly out of its packaging.

  1. Unpack the Case: Remove the case from its packaging.
  2. Inspect for Damage: Before first use, visually inspect the case for any signs of shipping damage. If damage is found, contact customer support.
Hermitshell hard travel case, open and empty, showing the main compartment and a mesh pocket in the lid.
Figure 3.1: The Hermitshell case opened, revealing the main storage compartment and an internal mesh pocket for small accessories.

4. Operating Instructions

Follow these steps to properly use your Hermitshell Hard Travel Case:

  1. Open the Case: Unzip the case completely using the dual zippers.
  2. Insert Power Bank: Carefully place your POWERADD EnergyCell II 10000 portable charger into the main molded compartment of the case. Ensure it fits snugly.
  3. Store Accessories (Optional): Use the mesh pocket in the lid to store small accessories such as charging cables or adapters.
  4. Close the Case: Zip the case closed securely. Ensure both zippers meet to fully seal the case.
Hermitshell hard travel case open with a black POWERADD EnergyCell II 10000 portable charger placed inside the main compartment.
Figure 4.1: The POWERADD EnergyCell II 10000 portable charger correctly placed within the Hermitshell case.
Hermitshell hard travel case open with a black POWERADD EnergyCell II 10000 portable charger inside, emphasizing that only the case is sold.
Figure 4.2: Illustrates the power bank inside the case. Please note, the power bank is for demonstration purposes only and is not included with the case.
Hermitshell hard travel case closed, showing the top view with dual zippers and red zipper pulls.
Figure 4.3: The Hermitshell case fully closed, secured by its dual zippers.
Hermitshell hard travel case attached to a backpack strap using a carabiner, demonstrating portability.
Figure 4.4: The Hermitshell case can be easily attached to bags or straps for convenient transport.

5. Maintenance

To ensure the longevity and appearance of your Hermitshell Hard Travel Case, follow these maintenance guidelines:

  • Cleaning: Wipe the exterior with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Allow to air dry completely.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the EVA material.
  • Storage: Store the case in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

6. Troubleshooting

This product is a simple protective case, and operational issues are rare. However, consider the following if you encounter any concerns:

  • Case Does Not Close Properly:
    • Ensure the POWERADD EnergyCell II 10000 portable charger is correctly seated in its compartment and no other items are obstructing the closure.
    • Check the zippers for any fabric or debris that might be caught.
  • Damage to Case:
    • If the case sustains significant damage (e.g., large cracks, broken zippers), its protective capabilities may be compromised. Consider replacing the case.

7. Specifications

Feature Detail
Brand Hermitshell
Model Number 200107
Compatible Device POWERADD EnergyCell II 10000 Portable Charger
Material EVA (Ethylene-vinyl acetate)
Color Black
Internal Dimensions Approximately 4 x 2.2 x 1.3 inches (10.16 x 5.59 x 3.3 cm)
Product Weight 76 grams

8. Warranty and Support

For warranty information or customer support regarding your Hermitshell Hard Travel Case, please refer to the seller's policy on the platform where the product was purchased or contact Hermitshell customer service directly through their official channels. Keep your purchase receipt as proof of purchase.

© 2026 Hermitshell. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.