1. Product Overview
The Ideal Standard Connect Air Basin Tap (Model A7027AA) is a high-quality, single-handle basin mixer designed for modern bathrooms. This model features a 15 cm spout ("Bocca da 15 cm") and a sleek chrome finish, offering both functionality and aesthetic appeal. It is designed for deck mounting and single-hole installation.
Image 1.1: Front view of the Ideal Standard Connect Air Basin Tap, showcasing its chrome finish and modern design.
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Ensure water supply is turned off before beginning any installation or maintenance work.
- Use appropriate tools and personal protective equipment (PPE) during installation.
- If you are unsure about any step, consult a qualified plumber.
- Do not overtighten connections, as this may damage the product or plumbing.
- Keep small parts away from children.
3. Package Contents
Verify that all components are present before beginning installation:
- Faucet Body (1)
- Mounting hardware (nuts, washers, gaskets)
- Flexible supply lines (pre-attached or separate)
- Instruction Manual (this document)
4. Specifications
| Feature | Detail |
|---|---|
| Brand | Ideal Standard |
| Model Name | CONNECT AIR |
| Part Number | A7027AA |
| Recommended Uses | Bathroom |
| Mounting Type | Deck Mount |
| Installation Type | Single Hole |
| Finish Type | Chrome |
| Material | Brass (Handle), Metal (Faucet Body) |
| Color | Chrome |
| Number of Handles | 1 |
| Handle Type | Lever |
| Hole Count | 1 |
| Special Feature | Tarnish Resistant |
| Item Weight | 1.6 Kilograms (3.52 pounds) |
| Product Dimensions | 11.65 x 1.89 x 7.2 inches |
| Spout Design | Standard, 15 cm Bocca |
Image 4.1: Detailed technical drawing showing the dimensions and installation requirements for the basin tap.
5. Setup and Installation
This section provides general guidelines for installing your Ideal Standard Connect Air Basin Tap. Refer to the technical drawing for specific measurements and connections.
- Prepare the Installation Area: Ensure the sink or countertop has a single hole of the appropriate size (refer to technical drawing for hole diameter, typically around 35-37mm). Clean the area thoroughly.
- Turn Off Water Supply: Locate the main water shut-off valve for your bathroom or entire home and turn it off. Open existing faucets to drain any remaining water from the lines.
- Install the Faucet Body:
- Insert the faucet body through the mounting hole from above the sink/countertop.
- From underneath, slide the rubber gasket, metal washer, and mounting nut onto the threaded shank of the faucet.
- Tighten the mounting nut securely using a basin wrench or appropriate tool. Do not overtighten.
- Connect Water Supply Lines:
- Connect the hot and cold flexible supply lines from the faucet to the corresponding hot and cold water supply valves. Ensure connections are hand-tight, then use a wrench for a final quarter-turn.
- Note: The technical drawing indicates G 3/8 connections for the supply lines.
- Check for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks are present, gently tighten the connections until they stop.
- Test Operation: Turn on the faucet and check for proper water flow and temperature control.
6. Operating Instructions
The Ideal Standard Connect Air Basin Tap features a single lever handle for easy operation.
- Water Flow Control: Lift the lever handle upwards to increase water flow. Push it downwards to decrease or turn off the water.
- Temperature Control: Move the lever handle to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve the desired water temperature.
Image 6.1: The Ideal Standard Connect Air Basin Tap shown in a typical bathroom installation, demonstrating its integration with a basin.
7. Maintenance
Proper care and maintenance will ensure the longevity and appearance of your Ideal Standard Connect Air Basin Tap.
- Cleaning: Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome fixtures. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol, as these can damage the finish.
- Tarnish Resistant: This faucet is designed to be tarnish resistant, but regular cleaning as described above is still recommended to maintain its luster.
- Aerator Cleaning: If water flow becomes restricted, the aerator at the end of the spout may need cleaning. Unscrew the aerator, rinse any debris, and reattach.
8. Troubleshooting
This section addresses common issues you might encounter with your basin tap.
- Low Water Flow:
- Check if the main water supply valve is fully open.
- Clean the aerator for any mineral buildup or debris.
- Inspect supply lines for kinks or obstructions.
- Leaks from Faucet Base:
- Ensure the mounting nut underneath the sink is securely tightened.
- Check if the rubber gasket between the faucet and the sink surface is properly seated.
- Leaks from Supply Line Connections:
- Gently tighten the connections at the supply valves. Do not overtighten.
- Ensure rubber washers are properly seated within the connections.
- No Hot or Cold Water:
- Verify that both hot and cold water supply valves are fully open.
- Check if the water heater is functioning correctly for hot water.
If issues persist after attempting these solutions, please contact customer support.
9. Warranty and Support
For information regarding warranty coverage and customer support for your Ideal Standard Connect Air Basin Tap, please refer to the warranty card included with your purchase or visit the official Ideal Standard website. You may also contact the seller, German Sanitary&Tool Shop, for assistance.
Manufacturer: Ideal Standard
Seller: German Sanitary&Tool Shop