Introduction
The Energizer LED Flashlight TAC-300 Pro is a compact and durable lighting tool designed for various applications. It features a robust construction and multiple light modes to suit different needs.
Key Features:
- Provides 300 lumens of light output.
- Constructed with aircraft-grade aluminum for durability.
- Offers three light modes: High, Low, and Emergency Strobe.
- IPX4 water-resistant, capable of withstanding splashing.
- Impact-resistant up to 1 meter.
- Includes a removable belt clip for convenient carrying.
Product Overview Video:
Setup
Battery Installation:
- Unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Insert one CR123 Lithium Battery into the battery compartment with the positive (+) end facing towards the flashlight head.
- Screw the tail cap back on by turning it clockwise until it is securely tightened.
Warning: Ensure correct battery polarity. Improper installation can damage the device.
Operating Instructions
Power On/Off and Mode Selection:
The flashlight is operated using the rear push button.
- To turn on/off: Press the rear button completely until it clicks.
- To cycle through modes: With the flashlight on, lightly press the rear button (without clicking) to switch between High, Low, and Emergency Strobe modes.
- The flashlight will typically start in High mode.
360 Spin View:
Maintenance
General Care:
- Keep the flashlight clean and free from dirt and debris. Wipe with a soft, dry cloth.
- Periodically check the O-rings for wear and tear to maintain water resistance.
- Store the flashlight in a cool, dry place when not in use for extended periods.
- Remove batteries if storing for long durations to prevent leakage.
Water Resistance:
The TAC-300 Pro has an IPX4 water-resistance rating, meaning it is protected against splashing water from any direction. It is not designed for submersion.
Troubleshooting
Common Issues and Solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. | Dead battery, incorrect battery installation. | Replace battery with a new CR123 Lithium Battery. Ensure battery is inserted with correct polarity. |
| Light is dim or flickers. | Low battery power, loose tail cap. | Replace battery. Tighten the tail cap securely. |
| Flashlight becomes hot during use. | Extended use on high setting, normal operation for high-lumen flashlights. | Reduce usage time on high mode. Switch to low mode if prolonged use is required. Allow the flashlight to cool down. |
| Flashlight shuts off unexpectedly. | Overheating protection, critically low battery. | Allow flashlight to cool. Replace battery. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Energizer |
| Model Number | E301380900 |
| Light Source Type | LED |
| Light Output Maximum | 300 lumens |
| Power Source | Battery Powered |
| Battery Type | CR123 Lithium Battery (1 required) |
| Runtime | Up to 35 hours (depending on mode) |
| Water Resistance Level | IPX4 (Water Resistant) |
| Material | Aircraft-grade Aluminum |
| Item Weight | 3.52 ounces |
| Item Dimensions (L x W x H) | 1.21" x 4.25" x 7.48" |
| Included Components | Flashlight |
| UPC | 039800136367 |
Warranty
The manufacturer warranty description for this product is stated as "Not applicable." For specific warranty inquiries, please refer to the retailer or contact Energizer customer service directly.
Support
For additional information, product registration, or customer support, please visit the official Energizer store:
