1. Introduction
This manual provides instructions for the assembly, operation, and maintenance of your Warmiehomy 2.7M Christmas Garland. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
2. Important Safety Information
Observe the following safety precautions to prevent damage to the product or personal injury:
- This product is intended for decorative purposes only.
- Keep away from open flames, heat sources, and direct sunlight to prevent material degradation.
- Ensure batteries are inserted correctly according to polarity markings. Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the product will not be used for an extended period.
- Do not immerse the battery box or lights in water. This product is not waterproof.
- Keep out of reach of small children and pets to avoid choking hazards from small parts (pine cones, berries, flowers).
- Handle the garland gently during setup to avoid detaching decorative elements.
3. Package Contents
Verify that all items are present and undamaged upon opening the package. If any items are missing or damaged, contact customer support.
- 1 x Christmas Garland (2.7 meters / 9 feet)
- 8 x Blue Flowers
- 10 x Pine Cones
- 10 x Red Berries
- 1 x String Light (50 LED lights) with battery box

Figure 3.1: Included accessories for the Warmiehomy Christmas Garland.

Figure 3.2: Visual representation of garland components and assembly stages.
4. Setup Instructions
Follow these steps to set up your Christmas garland:
- Unpack the Garland: Carefully remove the garland from its packaging. The garland may be compressed; gently fluff out the branches to achieve the desired fullness.
- Attach Decorative Elements: The blue flowers, pine cones, and red berries are typically pre-attached or can be easily integrated into the garland branches. Adjust their positions as desired for an even distribution.
- Install Batteries for Lights:
- Locate the battery box attached to the string lights.
- Open the battery compartment.
- Insert 3 x AA batteries (not included) into the compartment, ensuring correct polarity (+/-).
- Close the battery compartment securely.

Figure 4.1: Battery box for the LED string lights.
- Integrate String Lights: Carefully weave the 50 LED string lights throughout the garland, distributing them evenly for optimal illumination. Secure the battery box in a discreet location.
- Placement: Position the garland on your desired surface, such as a fireplace mantel, staircase railing, or doorway. Ensure it is securely placed to prevent falling.

Figure 4.2: Fully assembled and illuminated garland.
5. Operating Instructions
To operate the LED lights on your garland:
- Locate the ON/OFF switch on the battery box.
- Slide the switch to the "ON" position to illuminate the lights.
- Slide the switch to the "OFF" position to turn off the lights.

Figure 5.1: Garland lights in 'ON' and 'OFF' states.
6. Maintenance and Storage
- Cleaning: Gently dust the garland with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: When the lights dim or stop working, replace all 3 AA batteries with new ones.
- Storage:
- Before storing, ensure the lights are turned off and remove the batteries from the battery box.
- Gently coil the garland and place it in its original packaging or a suitable storage container to protect it from dust and damage.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. |
|
|
| Lights are dim. | Batteries are low. | Replace with new AA batteries. |
| Decorative elements (flowers, pine cones, berries) fall off. | Rough handling or loose attachment. | Reattach elements by gently tucking them into the garland branches. For persistent issues, a small amount of craft glue may be used. |
8. Specifications
- Brand: Warmiehomy
- Model Number: 2T3BWS-2
- Garland Length: 2.7 meters (approx. 106.3 inches / 8.8 feet)
- Garland Width: 25 cm (approx. 9.8 inches / 0.8 feet)
- Light Type: LED String Lights
- Number of Lights: 50
- Power Source: 3 x AA Batteries (not included)
- Material: Pine (artificial), plastic, fabric
- Item Weight: 2.99 pounds
- Product Dimensions: 8.27 x 8.27 x 16.14 inches (packaging)

Figure 8.1: Garland dimensions.
9. Warranty Information
Specific warranty details for this product are not provided in the available information. Please refer to your purchase documentation or contact the retailer for warranty terms and conditions.
10. Customer Support
For further assistance or inquiries, please contact Warmiehomy customer service through the retailer where the product was purchased. You may also visit the official Warmiehomy store on Amazon for more information: