Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Minn Kota Terrova Freshwater Bow-Mount Trolling Motor with MEGA Down Imaging and i-Pilot Link GPS. Designed for optimal performance and ease of use, the Terrova motor enhances your fishing experience with advanced features and reliable power.
Please read this manual thoroughly before operating your trolling motor to ensure safe and efficient use.
Key Features
- Easy-to-Deploy System: Features fall-away ramps and a spring-loaded Lift-Assist design for effortless deployment and stowing.
- i-Pilot Link GPS System: Utilizes GPS for Spot-Lock anchoring, path recording, and precise speed and steering control via a touchscreen remote or compatible Humminbird fish finder (sold separately).
- Low-Profile Electric Foot Pedal: Offers two steering options (heel/toe and left/right buttons), Spot-Lock activation, rotary speed control, and momentary/constant on/off toggles.
- Integrated Universal Sonar 2: Conceals and protects transducer and wiring within the motor's shaft for optimal sonar performance.
- Weedless Wedge 2 Prop: Swept-back flared blades power through vegetation without battery-draining chopping.
- Heading Sensor: Enables the Spot-Lock with Jog feature for precise five-foot adjustments in any direction.
- Integrated Battery Meter: Provides an instant reading of the motor's battery life.
Product Overview
Figure 1: Front view of the Minn Kota Terrova Trolling Motor, showing the motor head, shaft, and the included foot pedal and coiled cable.
Figure 2: Close-up view of the Minn Kota Terrova Trolling Motor's base and motor head, highlighting the robust mounting system.
Setup
- Mounting: Securely attach the trolling motor to the bow of your boat using the provided bolt-on bracket. Ensure the mounting surface is stable and flat.
- Power Connection: Connect the motor to a 24-volt power source (batteries, not included) following the wiring diagrams in the separate installation guide. Verify all connections are secure and insulated.
- Transducer Connection: The integrated Universal Sonar 2 wiring runs through the shaft. Connect it to your compatible fish finder (sold separately) as per the fish finder's instructions.
- i-Pilot Link Remote Pairing: Follow the instructions in the i-Pilot Link manual to pair the remote control with your trolling motor.
- Foot Pedal Connection: If using the foot pedal, connect its cable to the designated port on the motor base.
Operating Instructions
Deployment and Stowage
- To deploy, use the easy-to-deploy system's fall-away ramps to effortlessly slide the motor into the water.
- To stow, utilize the spring-loaded Lift-Assist design to easily pull the motor out of the water and secure it in its stowed position.
Using the i-Pilot Link Remote
The i-Pilot Link remote provides comprehensive control over your motor. It features a color touchscreen for intuitive navigation.
- Steering: Use the directional buttons to steer the motor.
- Speed Control: Adjust motor speed using the dedicated controls on the remote.
- Spot-Lock: Press the Spot-Lock button to electronically anchor your boat in a precise location using GPS.
- Spot-Lock with Jog: With the heading sensor, use the Jog feature to move your Spot-Lock location five feet in any direction.
- AutoPilot: Activate AutoPilot to automatically navigate your boat in a chosen direction.
- Path Recording: Record and retrace your fishing paths for future use.
- Battery Meter: Check the integrated battery meter on the remote for an instant reading of the motor's battery life.
Using the Foot Pedal
The low-profile electric foot pedal offers an alternative control method.
- Steering: Use the heel/toe pedal or left/right steering buttons for directional control.
- Speed Control: Adjust speed using the rotary speed control dial.
- Momentary/Constant On: Toggle between momentary and constant motor operation.
- Spot-Lock Activation: The foot pedal includes a dedicated button for Spot-Lock activation.
- AutoPilot On/Off: Toggle AutoPilot directly from the foot pedal.
Maintenance
- Propeller Inspection: Regularly inspect the Weedless Wedge 2 Prop for fishing line, debris, or damage. Clear any obstructions to maintain optimal performance and prevent battery drain.
- Shaft and Housing: Periodically clean the composite shaft and motor housing to remove salt, dirt, or other residues.
- Electrical Connections: Ensure all electrical connections are clean, tight, and free from corrosion.
- Battery Charging: Charge your batteries after each use to ensure full power for your next fishing trip.
- Storage: When not in use, store the trolling motor in a dry, protected area.
Troubleshooting
If you encounter issues with your Minn Kota Terrova trolling motor, please refer to the following common troubleshooting steps:
- Motor Not Responding:
- Check battery connections and ensure batteries are fully charged.
- Verify the i-Pilot Link remote is paired and has sufficient battery life.
- Inspect all wiring for loose connections or damage.
- Reduced Power/Speed:
- Check for debris or fishing line wrapped around the propeller.
- Ensure batteries are fully charged and in good condition.
- Verify no obstructions are impeding the motor's movement.
- GPS/Spot-Lock Inaccuracy:
- Ensure the motor has a clear view of the sky for GPS signal acquisition.
- Check for any magnetic interference near the heading sensor.
For more complex issues, please contact Minn Kota customer support or visit their official website for detailed troubleshooting guides.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Minn Kota |
| Model Name | Terrova |
| Model Number | 1358884 |
| Shaft Length | 60 inches |
| Thrust | 80 pounds |
| Voltage | 24 Volts |
| Mounting Type | Bow Mount |
| Material | Aluminum, Composite, Plastic |
| Item Weight | 57 Pounds |
| Color | Black |
| Included Components | Wireless Remote, Foot Pedal |
| UPC | 029402046959 |
Warranty Information
This Minn Kota Terrova trolling motor comes with a 2 Year Limited Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, or to register your product, visit the official Minn Kota website or contact their customer service.
Customer Support
For technical assistance, parts, or service, please contact Minn Kota customer support. You can find contact information on the official Minn Kota website or through your product's registration materials.
Online resources, including FAQs and additional guides, are also available at the Minn Kota official website.
