Viefow PP200SC Hot Surface Igniter Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Viefow PP200SC Hot Surface Igniter. This igniter is designed as a replacement part for various kerosene and forced-air heaters, ensuring reliable ignition.

The Viefow PP200SC is a heavy-duty silicon nitride igniter, engineered for durability and efficient performance, offering a robust alternative to original equipment parts.

Figure 1.1: Viefow PP200SC Hot Surface Igniter.

2. Compatible Heater Models

The Viefow PP200SC Hot Surface Igniter is compatible with a wide range of heater models from various brands. Please verify your heater's model number against the lists below to ensure compatibility.

Reddy Heater Models:

• R35D, R35E, R40, R40T, R55A, R55B, R55BT, R60, R70D, R70ET, R70DT
• R110B, R110BT, R110C, R110CT, R115, R115C, R115CT, R115T
• R155B, R155C, R165A, R165AT, R165CT, R200A, R200AT, R200B
• RC40, RC55T, RC70T, RC115CT, RC115T, RC165CT, RC165T
• RH125T, RH170T, RH200T, RHD125T, RHD170T, RHD200T
• RL125T, RL170T, RH200T, RM60, RM115, RM115C, RM115CT, RM155, RM155C, RM200AT, RM200BT

Master Heater Models:

• B50H, B50J, B55, B55BT, B60, B70D, B70DT
• B110B, B110BT, B115, B115CT, B115T, B150J, B150JT, B155CT, B155T
• B165A, B165AT, B165CT, B200AT, B200BT
• BC40, BC55T, BC70T, BC115CT, BC165CT, BC165T
• M125T, M170T, M200T

Remington Heater Models:

• REM35B, REM35C, REM40, REM50C, REM55A, REM55B, REM60
• REM110B, REM110BT, REM115, REM115C, REM115T
• REM150E, REM155B, REEM155C, REM200AT, REM200BT
• RE125T, RE170T, RE200T

Also compatible with many models from All-Pro, Dayton, John Deere, ProCom, and Sears.

Figure 2.1: Example of igniter installation and partial list of compatible models.

3. Product Features

• Advanced Material: Constructed with heavy-duty silicon nitride for enhanced durability and longevity compared to traditional igniters.
• Reliable Ignition: Designed to provide consistent and strong ignition for kerosene and forced-air heaters.
• Direct Replacement: Engineered to be a direct fit for original equipment igniters, simplifying the replacement process.
• Improved Performance: Offers quick and efficient heating, ensuring your heater operates effectively.
• Part Numbers: Replaces PP200, HA1000, 102548-01, 102548-02, 102548-03, 102548-04, 102548-05, 102548-06, 102548-07, PP200SC.

Figure 3.1: The Viefow PP200SC igniter and examples of compatible heater types.

4. Installation Instructions

Safety First: Before beginning any installation, ensure the heater is completely disconnected from its power source and has cooled down. Failure to do so can result in electric shock or burns.

1. Disconnect Power: Unplug the heater from the electrical outlet.
2. Access Igniter: Locate the existing igniter within your heater. This may require removing a cover or panel. Refer to your heater's specific service manual for exact location and access procedures.
3. Remove Old Igniter: Carefully disconnect the wiring from the old igniter and unmount it from its position. Note the orientation and connection points for reinstallation.
4. Install New Igniter: Mount the Viefow PP200SC igniter in the same position and orientation as the old one. Ensure it is securely fastened.
5. Connect Wiring: Connect the yellow wires of the new igniter to the corresponding terminals. The connectors are designed for easy and fast installation.
6. Secure Panels: Replace any covers or panels that were removed to access the igniter.
7. Test Operation: Plug the heater back into the power source and test its ignition. The igniter should glow brightly and initiate combustion.

Figure 4.1: The igniter in various stages, demonstrating its appearance and function.

5. Operation

The Viefow PP200SC Hot Surface Igniter operates automatically as part of your heater's ignition system. When the heater is turned on and calls for heat, the igniter will receive electrical current, causing its silicon nitride element to heat up rapidly and glow. This glowing element then ignites the fuel/air mixture, initiating the combustion process in the heater.

No user intervention is required for the igniter's operation once correctly installed.

6. Maintenance

The Viefow PP200SC Hot Surface Igniter is designed for long-term, maintenance-free operation. However, to ensure optimal performance and longevity of your heater's ignition system, consider the following general maintenance tips for your heater:

• Regular Cleaning: Periodically clean the area around the igniter and burner assembly to prevent dust and debris buildup, which can hinder ignition.
• Inspect Wiring: During routine heater maintenance, inspect the igniter's wiring for any signs of wear, fraying, or loose connections.
• Avoid Physical Damage: Handle the igniter with care during installation or any heater servicing to prevent damage to the ceramic element.

7. Troubleshooting Common Issues

If your heater is experiencing ignition problems after installing the Viefow PP200SC igniter, consider the following:

Note: For complex issues or if you are unsure about any step, it is recommended to consult a qualified HVAC technician.

8. Product Specifications

Figure 8.1: Dimensional details of the Viefow PP200SC igniter.

9. Warranty and Support

For specific warranty information regarding your Viefow PP200SC Hot Surface Igniter, please refer to the product packaging or contact the seller directly. General return policies typically allow for returns within 30 days of purchase if the item is new and unused.

For technical support or inquiries, please reach out to the manufacturer or seller through the platform where the product was purchased. Ensure you have your purchase details and product model number readily available.

You can visit the Viefow Store on Amazon for more information on their products.