1. Introduction
Thank you for choosing the SSC-LUXon CELI-X LED GX53 Flat Surface-Mounted Spot Light. This product is designed to provide efficient and pleasant lighting for your indoor spaces. Featuring an extra-flat design and a replaceable GX53 LED bulb, it offers a uniform warm white light output. This manual provides essential information for the safe installation, operation, and maintenance of your new light fixture.
Image 1.1: The SSC-LUXon CELI-X LED GX53 Flat Surface-Mounted Spot Light, showcasing its compact and modern design.
2. Safety Instructions
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Always disconnect the main power supply before performing any installation, maintenance, or bulb replacement. Work on electrical installations should only be carried out by qualified personnel.
- Indoor Use Only: This product is designed for indoor use in dry environments. Do not expose it to moisture or extreme temperatures.
- Voltage: Ensure the power supply voltage matches the product's specified voltage (230V).
- Heat: Do not cover the light fixture with insulating material. Ensure adequate ventilation around the fixture.
- Bulb Type: Only use GX53 LED bulbs with the specified wattage (4.5W or 5W) and voltage (230V).
- Cleaning: Use a dry, soft cloth for cleaning. Do not use abrasive cleaners or solvents.
3. Package Contents
Verify that all components are present in the package:
- 1 x SSC-LUXon CELI-X Flat Surface-Mounted Spot Light fixture (White)
- 1 x GX53 LED Bulb (4.5W / 5W, 230V, Warm White)
- Mounting hardware (screws and dowels)
4. Installation
Follow these steps for safe and correct installation:
- Prepare for Installation: Before starting, ensure the main power supply to the installation area is switched off at the circuit breaker.
- Mark Mounting Points: Use the base plate of the fixture to mark the drilling points on the ceiling. The base plate dimensions are approximately Ø 95 mm.
- Drill Holes: Drill holes at the marked points and insert the provided dowels.
- Install Base Plate: Connect the electrical wires from the ceiling to the terminal block on the fixture's base plate. Ensure correct polarity (Live, Neutral, Earth if applicable). Secure the base plate to the ceiling using the screws.
- Attach Fixture Body: Twist the main body of the light fixture onto the installed base plate until it is securely fastened.
- Insert LED Bulb: Carefully insert the GX53 LED bulb into the socket by twisting it into place.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image 4.1: Visual guide for quick and easy installation. Steps include installing the base plate, twisting on the housing, inserting the bulb, and enjoying the light.
Image 4.2: Diagram showing the dimensions of the light fixture body (Height 55 mm, Diameter 95 mm) and the base plate (Diameter 60 mm, with screw spacing of 38 mm).
Image 4.3: Diagram highlighting key features: includes GX53 LED bulb (replaceable), aluminum body (matte white), and extra wide, pleasant room-filling light.
5. Operating Instructions
The SSC-LUXon CELI-X spot light is designed for simple operation.
- Turning On/Off: Operate the light using a standard wall switch connected to the fixture's power supply.
- Light Output: The included GX53 LED bulb provides a warm white light (2700 Kelvin) with a luminous flux of 400 lumens.
- Non-Dimmable: This fixture and the included bulb are not dimmable. Do not connect to a dimmer switch.
Image 5.1: Multiple SSC-LUXon CELI-X spot lights illuminating a modern kitchen space, demonstrating their effective light distribution.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your spot light.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
- Bulb Replacement: The GX53 LED bulb is replaceable. To replace, ensure power is off, then twist the old bulb counter-clockwise to remove it. Insert the new GX53 LED bulb by twisting it clockwise until secure. Ensure the replacement bulb matches the specifications (GX53, 230V, max 5W).
7. Troubleshooting
If you encounter issues with your SSC-LUXon CELI-X spot light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Bulb is faulty or not properly installed. | Check the circuit breaker and wall switch. Ensure the bulb is securely twisted into the socket. Replace the bulb if necessary. |
| Light flickers. | Loose bulb connection. Incompatible dimmer switch (if mistakenly used). Faulty bulb. | Ensure the bulb is securely twisted. This product is not dimmable; remove any dimmer switch. Replace the bulb. |
| Light is too dim. | Incorrect bulb wattage. | Ensure the correct GX53 LED bulb (4.5W / 5W) is used. |
If the problem persists after trying these solutions, please contact SSC-LUXon customer support.
8. Specifications
Detailed technical specifications for the SSC-LUXon CELI-X LED GX53 Flat Surface-Mounted Spot Light:
| Feature | Specification |
|---|---|
| Brand | SSC-LUXon |
| Model Number | 4567 |
| Product Dimensions (L x W x H) | 9.5 x 9.5 x 5.5 cm |
| Weight | 295 grams |
| Material | Aluminum |
| Finish Type | Lacquered |
| Color | White |
| Style | Modern |
| Voltage | 230 Volts |
| Bulb Type | LED |
| Base Type | GX53 |
| Power Consumption | 5 Watts (LED) |
| Incandescent Equivalent | 50 Watts |
| Luminous Flux | 400 lm |
| Color Temperature | 2700 Kelvin (Warm White) |
| Color Rendering Index (CRI) | 82 |
| Average Lifespan | 25,000 Hours |
| Start-up Time | < 0.5 seconds |
| Dimmable | No |
| Energy Efficiency Class | F |
| Special Features | Bulb included, Replaceable bulb, Beautiful light surface, Integrated connection terminal, Extra flat |
| Usage | Indoor use only in enclosed spaces |
Image 8.1: EU Energy Label for the SSC-LUXon LED light, indicating an energy efficiency class of F. For more details, refer to the EPREL database.
9. Warranty Information
This SSC-LUXon product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. Amazon's return policy allows for returns within 31 days of purchase.
10. Support Information
For technical assistance, troubleshooting beyond this manual, or inquiries regarding your SSC-LUXon CELI-X LED GX53 Flat Surface-Mounted Spot Light, please contact the manufacturer or your retailer. Ensure you have your model number (4567) and purchase details available when seeking support.
Manufacturer: SSC-LUXon
Contact: Refer to the contact information provided on the product packaging or the official SSC-LUXon website.