VIVOSUN 10x7x7 Ft. Walk-in Greenhouse Instruction Manual

1. Important Safety Information

Please read and understand all safety instructions before assembly and use of the VIVOSUN 10x7x7 Ft. Walk-in Greenhouse. Failure to follow these instructions may result in injury or damage to the product.

• This product contains a galvanized steel frame. Handle with care during assembly to avoid injury from sharp edges.
• The greenhouse is designed for outdoor use.
• Protect yourself from UV exposure during use, especially during prolonged periods inside the greenhouse.
• Use caution when moving and installing the greenhouse due to its size and weight. It is recommended to have at least two people for assembly and relocation.
• Properly anchor the greenhouse to the ground to ensure stability, especially in windy conditions.

2. Product Overview

The VIVOSUN 10x7x7 Ft. Walk-in Greenhouse provides a protected environment for cultivating plants. It features a robust galvanized steel frame and a durable PE cover designed to withstand various outdoor conditions.

Key Features:

• Heavy-duty Galvanized Steel Frame: Provides structural integrity and resistance to corrosion and rust.
• Roll-up Entrance: A zippered roll-up door offers easy access and allows for adjustable ventilation.
• Ventilation Windows: Six side windows facilitate air circulation, crucial for temperature and humidity control.
• Transparent Reinforced PE Cover: Protects plants from harmful UV rays while allowing beneficial sunlight penetration. It is waterproof and designed for durability.
• Extra-long Cover Design: Allows the cover edges to be buried in soil for enhanced stability and airtightness.
• Double-stranded Edge Banding: Reinforces the cover for increased toughness and longevity.

3. Components List

Before assembly, verify that all components are present and undamaged. Refer to the schematic provided with your product for specific part numbers.

• Galvanized Steel Poles (various lengths and shapes for frame construction)
• Connectors (for joining steel poles)
• Transparent Reinforced Green PE Cover
• Ground Stakes
• Drawstring/Ropes (for securing the cover and frame)
• Zippered Roll-up Door Mechanism
• Window Flaps with securing ties

4. Setup and Assembly

Assembly typically requires two people and approximately 1-2 hours. Refer to the included schematic for detailed visual guidance.

1. Site Selection: Choose a level, well-drained area for your greenhouse. Consider sun exposure, wind patterns, and proximity to water sources.
2. Unpack Components: Lay out all poles, connectors, and the cover. It is helpful to label parts if they are not already marked.
3. Assemble the Base Frame: Begin by connecting the base poles. Insert poles into connectors without fully pushing them in initially. This allows for flexibility during the assembly of subsequent sections.
4. Construct the Arch Frame: Continue building the arched sections of the frame, connecting them to the base.
5. Secure Connections: Once the entire frame is loosely assembled, gently tap all poles fully into their connectors using a rubber mallet or a piece of wood to ensure a snug and stable fit.
6. Position the Frame: With two people, carefully lift and move the assembled frame to its final desired location.
7. Install the Cover: Carefully drape the PE cover over the assembled frame. Ensure the zippered door and windows align correctly. This step is easier with two people.
8. Anchor the Greenhouse:
   • Bury the extra-long edges of the PE cover in the soil around the perimeter of the greenhouse. This significantly enhances stability and airtightness.
   • Use the provided ground stakes and drawstrings to further secure the frame to the ground, especially at the corners and along the sides.

5. Operating Instructions

Effective operation of your greenhouse involves managing temperature, humidity, and ventilation to suit your plants' needs.

• Access: Use the zippered roll-up door for entry and exit. Roll up the door and secure it with the ties provided to keep it open.
• Ventilation: Utilize the six side windows to control airflow. Open them during warmer periods to prevent overheating and reduce humidity. Close them to retain heat and humidity.
• Temperature Management: On sunny days, even in cooler weather, the greenhouse interior can become very warm. Monitor internal temperatures and adjust ventilation accordingly.
• Humidity Control: Proper ventilation through the windows helps prevent excessive humidity, which can lead to fungal diseases.

6. Maintenance

Regular maintenance will extend the lifespan of your VIVOSUN greenhouse and ensure optimal performance.

• Cleaning the Cover: Periodically clean the PE cover with mild soap and water to remove dirt and debris that can reduce light transmission. Avoid abrasive cleaners.
• Frame Inspection: Regularly check all frame connections to ensure they remain tight. Re-tap any loose poles into their connectors.
• Anchoring Check: Verify that the ground stakes and buried cover edges are secure, especially after strong winds or heavy rainfall. Re-anchor if necessary.
• Zipper Care: Keep zippers clean and lubricated if they become stiff. Avoid forcing stuck zippers to prevent damage.
• Winter Preparation: In areas with heavy snowfall, it is advisable to clear snow from the greenhouse roof to prevent structural collapse. Consider disassembling the greenhouse for winter storage in extreme conditions.

7. Troubleshooting

This section addresses common issues you might encounter with your greenhouse.

• Greenhouse Instability: If the greenhouse feels unstable, re-check all frame connections to ensure poles are fully inserted into connectors. Verify that the cover edges are properly buried and all ground stakes are securely fastened. Consider adding additional weights (e.g., bricks) to the base frame for extra stability in very windy areas.
• Excessive Heat Inside: Open the zippered door and all six side windows to increase ventilation and reduce internal temperature. Consider using shade cloth over the greenhouse during peak summer heat if plants are overheating.
• Poor Air Circulation/High Humidity: Ensure all windows are open during the day to allow for adequate airflow. If humidity remains high, consider adding a small fan for improved circulation.
• Cover Damage (Tears/Holes): Small tears in the PE cover can often be repaired with greenhouse repair tape. Please note that VIVOSUN does not typically sell replacement covers separately; a new greenhouse may be required for extensive damage.
• Zipper Malfunction: If a zipper is difficult to operate, clean any debris from the teeth and apply a zipper lubricant. If the zipper is broken, it may require professional repair or replacement of the cover.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the VIVOSUN official website or contact VIVOSUN customer service directly. Keep your purchase receipt as proof of purchase.

VIVOSUN Customer Service: Please visit www.vivosun.com for contact details and support resources.