Introduction
The Tamagotchi Original is a digital pet that requires care and attention. This manual provides instructions for setting up and interacting with your virtual pet, ensuring its healthy growth and development.
What's in the Box
- One Original Tamagotchi Toy
- One Chain
- One CR2032 Battery (pre-installed)
Setup
Initial Activation
Your Tamagotchi comes with a pre-installed CR2032 battery. To activate it, pull the plastic tab from the side of the device. The screen will display an egg, indicating it is ready to begin its life cycle.
The Tamagotchi device is packaged in a clear plastic shell within a purple and white cardboard box. A small instruction leaflet is visible next to the device.
Operating Your Tamagotchi
Controls
The Tamagotchi device features three buttons (A, B, C) located below the screen. These buttons are used to navigate menus and interact with your pet:
- Button A: Selects menu options.
- Button B: Confirms selections.
- Button C: Cancels actions or returns to the previous screen.
The Tamagotchi device, with its purple and black argyle pattern, is displayed on a white desk next to a succulent plant and office supplies. The screen shows a pixelated character, and the three white control buttons are visible at the bottom.
Caring for Your Pet
Your Tamagotchi requires regular care to grow into a healthy adult. Pay attention to its needs, indicated by icons on the screen. Key actions include:
- Feeding: Provide meals and snacks to keep your pet full.
- Cleaning: Clean up after your pet uses the bathroom to maintain hygiene.
- Playing: Engage in games to keep your pet happy and entertained.
- Medicine: Administer medicine if your pet becomes sick.
- Discipline: Discipline your pet if it misbehaves when its needs are already met.
Growth and Evolution
The way you care for your Tamagotchi will influence its growth and evolution into one of several adult characters. Consistent and attentive care leads to different outcomes and character types.
Maintenance
Battery Replacement
The Tamagotchi uses one CR2032 Lithium Metal battery. When the battery is low, the screen may dim, or the device may stop responding. To replace the battery:
- Locate the battery compartment on the back of the device.
- Use a small screwdriver to open the compartment.
- Carefully remove the old battery and insert a new CR2032 battery, ensuring correct polarity.
- Securely close the battery compartment.
Warning: Batteries can be a choking hazard. Keep out of reach of small children.
Troubleshooting
- Device not turning on: Ensure the battery tab has been removed. If already removed, try replacing the CR2032 battery.
- Screen is blank or frozen: Remove and reinsert the battery to perform a soft reset. Note that this may reset your pet's progress.
- Buttons are unresponsive: Check for any debris around the buttons. If the issue persists, a battery replacement might be necessary.
- Pet is constantly beeping: This indicates your pet needs attention. Check its hunger, happiness, and health status.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 42868 |
| Power Source | 1 x CR2032 Lithium Metal Battery (included) |
| Item Weight | 3.2 ounces |
| Product Dimensions | 1.75 x 0.75 x 2.13 inches |
| Material | Plastic |
| Age Range | 8 years and up |
Safety Information
WARNING: CHOKING HAZARD - Small parts. Not suitable for children under 3 years.
This product contains a button or coin cell battery. If swallowed, it can cause severe injury or death. Seek immediate medical attention if swallowed.
Warranty and Support
For product support or warranty inquiries, please refer to the manufacturer's official website or contact their customer service. Keep your purchase receipt for warranty claims.
Manufacturer: Bandai