YuYue Electronic Wireless Bluetooth Media Button Remote User Manual

Introduction

The YuYue Electronic Wireless Bluetooth Media Button Remote provides convenient wireless control for media playback, selfie capture, and voice assistant activation on compatible iOS devices. Designed for versatile use, it offers easy access to essential functions without needing to interact directly with your phone, enhancing safety and convenience in various environments such as cars or motorcycles.

Package Contents

• 1 x YuYue Electronic Wireless Bluetooth Media Button Remote
• 1 x 3M adhesive sticker
• 1 x Button bracket for mounting

Important Notes

• This device does not support Android OS 12 or later versions. Android 12 and newer versions may cause the 'previous' and 'next' buttons to be incompatible.
• Compatibility is primarily with iOS devices supporting Bluetooth 4.0 and later.
• Some video applications may have protocol incompatibilities, which could result in certain buttons being non-functional.
• If a Bluetooth device is connected and your phone's on-screen keyboard does not display, press the volume up (+) and volume down (-) buttons simultaneously for 2-3 seconds to switch input modes.
• If the button backlight does not flash upon pressing, the CR2025 battery may need replacement.
• A small number of mobile phones or tablets may not be fully compatible with this Bluetooth connection.

Setup

1. Battery Installation

The device comes with a pre-installed CR2025 lithium metal battery. If the battery needs replacement, carefully open the device to access the battery compartment. Ensure the new CR2025 battery is inserted with the correct polarity.

Internal view of the remote, illustrating the placement of the CR2025 battery.

2. Bluetooth Pairing

1. Ensure the media button has a functional battery.
2. On your iOS device, navigate to the Bluetooth settings.
3. Activate Bluetooth on your device.
4. The media button should appear in the list of available devices (often named 'BT Shutter Button' or similar). Select it to pair.
5. No additional software or applications are required for pairing.
6. The wireless Bluetooth range is approximately 30 feet (9 meters).

3. Mounting the Device

Use the included button bracket and 3M adhesive sticker to securely attach the media button to a steering wheel, motorcycle handlebars, or other convenient locations. This allows for easy access while keeping your hands on the wheel or controls.

Examples of the media button mounted on a car steering wheel, motorcycle handlebars, and bicycle handlebars for convenient access.

Operating Instructions

Media Playback Control

• Play/Pause: Press the central button to play or pause media.
• Next Track: Press the right arrow button to skip to the next track.
• Previous Track: Press the left arrow button to go back to the previous track.
• Volume Up: Press the 'VOL+' button to increase volume.
• Volume Down: Press the 'VOL-' button to decrease volume.

Voice Assistant Activation (Siri)

To activate Siri on compatible iOS devices:

1. After initial Bluetooth connection, press the volume up (+) and volume down (-) buttons simultaneously for 3 seconds to establish the Siri activation link.
2. Subsequently, press the central button for 3 seconds to wake up Siri.

Selfie Capture

When your phone's camera app is open, the media button can be used to remotely trigger the shutter for taking selfies or group photos.

Button Backlight

The buttons feature a blue backlight. When a button is pressed, the backlight will illuminate for approximately 2-3 seconds and then turn off to conserve battery power.

Maintenance

Battery Replacement

The media button is powered by one CR2025 lithium metal battery. The battery is designed for a long lifespan, up to 2 years under typical usage. If the button backlight no longer illuminates or the device fails to connect, replace the CR2025 battery. To replace, carefully separate the two halves of the device to access the battery compartment and insert a new CR2025 battery, ensuring correct orientation.

Troubleshooting

• Device not connecting: Ensure Bluetooth is enabled on your phone and the media button has a charged battery. Try re-pairing the device.
• Buttons not responding: Check battery level. If the button light does not flash, replace the CR2025 battery. Ensure your device is compatible (iOS 4.0+).
• 'Previous'/'Next' buttons not working on Android: This device is not compatible with Android OS 12 or later. These functions may be affected on older Android versions as well.
• On-screen keyboard disappears: If your phone's keyboard does not appear while the media button is connected, press the volume up (+) and volume down (-) buttons simultaneously for 2-3 seconds to switch input modes.
• Buttons not working in certain video apps: Some video applications may have protocol incompatibilities. This is a limitation of the app, not the media button.

Specifications

• Model Number: AUB081RG3NKC
• Product Dimensions: 1.4 x 1.4 x 0.3 inches (35mm diameter, 8mm thickness)
• Item Weight: 0.634 ounces (18 grams)
• Connectivity Technology: Bluetooth
• Power Source: 1 x CR2025 Lithium Metal Battery (included)
• Material: Plastic
• Manufacturer: YuYue Electronic
• Date First Available: May 31, 2018

The media button remote with its approximate dimensions of 35mm diameter and 8mm thickness.

Warranty Information

Specific warranty details for the YuYue Electronic Wireless Bluetooth Media Button Remote are not provided in this manual. Please refer to the retailer's return policy or contact YuYue Electronic directly for comprehensive warranty information and terms.

Support

For further assistance, technical support, or inquiries regarding your YuYue Electronic Wireless Bluetooth Media Button Remote, please contact YuYue Electronic customer support through their official channels or the retailer from whom the product was purchased.