1. Introduction
Thank you for choosing the HHSOET Metal Wall Mount Power Strip. This manual provides essential information for the safe and effective use of your new power strip. This device is designed to provide reliable power distribution with enhanced safety features for various environments, including workshops, garages, offices, and homes.
The HHSOET Metal Wall Mount Power Strip features 6 widely spaced AC outlets, a durable aluminum alloy housing, an integrated on/off switch with a 15A circuit breaker, and a heavy-duty 6-foot 14AWG power cord. It also includes 1200 Joules of surge protection to safeguard your electronic devices from power fluctuations.
Image 1.1: HHSOET Metal Wall Mount Power Strip
2. Important Safety Instructions
WARNING: To reduce the risk of electric shock, fire, or injury, please read and follow all instructions carefully.
- Indoor Use Only: This power strip is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Electrical Rating: Do not exceed the electrical rating of 15A, 125V, 60Hz, 1875W. Overloading the power strip can cause overheating and fire.
- Grounding: Ensure the power strip is plugged into a properly grounded 3-prong outlet.
- Avoid Overloading: Do not plug in appliances that individually or cumulatively exceed the maximum power rating.
- Do Not Disassemble: Do not attempt to open, modify, or repair the power strip. There are no user-serviceable parts inside.
- Keep Away from Water: Do not expose the power strip to water or other liquids.
- Cord Care: Do not run the power cord under carpets, furniture, or heavy objects. Avoid placing objects on the cord.
- Children and Pets: Keep the power strip out of reach of children and pets.
- Surge Protection: The integrated surge protection helps protect connected devices from power surges. However, it is not a substitute for proper grounding or protection against direct lightning strikes.
3. Package Contents
Please verify that all items are present and in good condition upon opening the package:
- 1 x HHSOET Metal Wall Mount Power Strip (Model: 6ACSW-2)
- 4 x Mounting Screws
4. Product Features
- 6 Widely Spaced AC Outlets: Designed with ample space (approximately 1.57 inches / 4 cm center-to-center) between outlets to accommodate larger power adapters without blocking adjacent ports.
- Multiple Protection System: Equipped with a 15 Amp circuit breaker and surge protection (1200 Joules) to guard against short-circuiting, over-current, over-temperature, and over-voltage.
- Durable Aluminum Alloy Housing: Constructed from high-quality aluminum alloy for excellent workmanship, sturdiness, and durability, protecting internal components from impact and rust.
- Heavy Duty 14AWG Power Cord: Features a robust 6-foot 14AWG power cord, providing flexibility in placement while ensuring safe and efficient power delivery.
- Integrated On/Off Switch: A lighted power switch allows for easy control of all connected devices and indicates power status.
- Mountable Design: Includes pre-drilled mounting holes and screws for convenient installation on walls, workbenches, or other surfaces.
Image 4.1: 15 Amp Circuit Breaker Switch
Image 4.2: Widely Spaced Outlets
5. Setup and Installation
The HHSOET Metal Wall Mount Power Strip is designed for easy installation in various indoor settings. Follow these steps to mount your power strip:
- Choose a Location: Select a suitable, dry, indoor location for mounting, such as a workbench, wall, or desk. Ensure the location is within reach of a grounded power outlet and away from moisture or heat sources.
- Mark Mounting Points: Hold the power strip in the desired mounting position. Use a pencil to mark the locations of the four mounting holes on the surface.
- Drill Pilot Holes (if necessary): Depending on the mounting surface (e.g., wood, drywall), you may need to drill small pilot holes at the marked points. Use a drill bit appropriate for the provided screws.
- Secure the Power Strip: Align the mounting holes on the power strip with the pilot holes (or marks) on the surface. Insert the provided screws and tighten them securely to fasten the power strip in place.
- Connect to Power: Once securely mounted, plug the power strip's 3-prong plug into a standard 125V AC grounded wall outlet.
Image 5.1: Mounting Bracket Detail
Image 5.2: Mounted Power Strip Example
6. Operating Instructions
Using your HHSOET Metal Wall Mount Power Strip is straightforward:
- Power On/Off: Locate the red on/off switch on the power strip. Press the switch to the 'ON' position to supply power to the outlets. The switch will illuminate when power is active. Press it to the 'OFF' position to cut power.
- Connect Devices: Plug your electronic devices into the available AC outlets. Ensure that the total power consumption of all connected devices does not exceed the power strip's maximum rating of 1875W.
- Surge Protection: The power strip provides 1200 Joules of surge protection. In the event of a power surge, the surge protection will activate to protect your connected electronics.
- Circuit Breaker: If the power strip is overloaded, the integrated 15A circuit breaker will trip, cutting power to the outlets to prevent damage. Refer to the Troubleshooting section for instructions on resetting the circuit breaker.
7. Maintenance
To ensure the longevity and safe operation of your power strip, follow these simple maintenance guidelines:
- Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners, aerosols, or harsh chemicals.
- Inspection: Periodically inspect the power cord, plug, and outlets for any signs of damage, fraying, or loose connections. If any damage is observed, discontinue use immediately.
- Storage: If storing the power strip, ensure it is in a dry, cool place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
If you encounter issues with your HHSOET Metal Wall Mount Power Strip, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to outlets | Power switch is off Circuit breaker tripped Wall outlet has no power | Ensure the power switch is in the 'ON' position. Reset the circuit breaker (see below). Test the wall outlet with another device. |
| Circuit breaker tripped | Overload (too many devices or high-power devices connected) | Unplug some devices to reduce the load. Wait a few minutes, then press the red reset button on the circuit breaker to restore power. |
| Power strip feels hot | Overload Poor ventilation | Immediately unplug devices to reduce the load. Ensure the power strip is in a well-ventilated area. If overheating persists, discontinue use. |
| Physical damage to unit or cord | Accidental impact or wear and tear | Discontinue use immediately. Do not attempt to repair. Contact customer support. |
9. Specifications
| Model Number | 6ACSW-2 |
| Product Dimensions | 14.5 x 1.6 x 1.6 inches (36.8 x 4.1 x 4.1 cm) |
| Item Weight | 1.54 pounds (0.7 kg) |
| Total Power Outlets | 6 AC Outlets |
| Voltage Rating | 125 Volts AC |
| Current Rating | 15 Amps |
| Power Rating | 1875 Watts |
| Frequency | 60 Hz |
| Cord Length | 6 feet (1.83 meters) |
| Wire Gauge | 14AWG SJT 3/C |
| Material | Aluminum Alloy |
| Surge Protection | 1200 Joules |
| Certifications | UL STD, NO.1363 certified to CSA STD C22.2 No.308 |
Image 9.1: Product Dimensions
10. Customer Support
HHSOET is committed to providing high-quality products and excellent customer service. If you encounter any issues with your Metal Wall Mount Power Strip, or if you have questions that are not addressed in this manual, please do not hesitate to contact us.
For assistance, please reach out to HHSOET customer support through the platform where you purchased the product (e.g., Amazon). We are dedicated to providing a satisfactory solution to any concerns you may have.