ENHANCE ENPCSM2100BKUS

ENHANCE Gaming Attack Sound Bar PC Speaker Instruction Manual

Model: ENPCSM2100BKUS

Introduction

The ENHANCE Gaming Attack Sound Bar PC Speaker is designed to provide enhanced audio for your gaming, music, and movie experiences. This soundbar features a 2.0 channel design with dual 50mm drivers, 40W peak audio power, multiple input options, and customizable LED lighting. Its low-profile design allows for convenient placement under most monitors, optimizing desk space.

What's in the Box

  • ENHANCE Gaming Attack Sound Bar PC Speaker
  • 3.5mm AUX audio cable
  • AC power cable

Key Features

  • Room-Filling Audio: 2.0 channel soundbar with dual 50mm drivers for clear dialogue and immersive volume.
  • Clutter-Free Design: Low-profile form factor fits under curved, dual, or single monitors.
  • Dual Audio Input Options: Connect via 3.5mm AUX for computers and a secondary AUX port for phones or tablets.
  • LED Gaming Setup: Choose from 3 RGB light colors or 3 dynamic lighting modes.
  • Hassle-Free Plug & Play: Simple installation with AC power and 3.5mm AUX audio cord.

Setup Instructions

  1. Placement: Position the soundbar on a flat, stable surface directly under your computer monitor. Ensure adequate space for cable connections at the rear.
  2. Power Connection: Connect the provided AC power cable to the soundbar's power input and then to a wall outlet.
  3. Audio Connection (Primary): Connect one end of the 3.5mm AUX audio cable to the primary AUX input on the soundbar and the other end to the audio output port of your computer.
  4. Audio Connection (Secondary - Optional): For a secondary device like a phone or tablet, connect a 3.5mm AUX cable (not included) to the secondary AUX input on the soundbar and to your device.
  5. Power On: Press the power button on the side of the soundbar to turn it on.
ENHANCE Gaming Attack Sound Bar with dual audio inputs connected to a PC and a smartphone.

Figure 1: Dual audio input options for PC and mobile devices.

ENHANCE Gaming Attack Sound Bar placed neatly under a computer monitor on a desk with a keyboard and mouse.

Figure 2: Soundbar positioned under a monitor for a sleek, space-saving setup.

Operating Instructions

Power On/Off

  • To power on, press the power button located on the side of the soundbar.
  • To power off, press and hold the power button for a few seconds.

Volume Control

  • Adjust the volume using the large rotary knob on the side of the soundbar. Turn clockwise to increase volume, counter-clockwise to decrease.

Input Switching

  • Press the input switch button (often labeled with an icon like a circle with an arrow or 'M' for mode) on the side of the soundbar to cycle between the connected audio inputs (e.g., PC AUX, Phone AUX).

LED Lighting Modes

  • Press the LED mode button (often labeled with an asterisk or lightbulb icon) on the side of the soundbar to cycle through the available lighting options.
  • Options include 3 solid RGB colors and 3 dynamic lighting modes.
ENHANCE Gaming Attack Sound Bar displaying various LED lighting colors: blue, red, green, and a multi-color dynamic mode.

Figure 3: Customizable LED lighting modes.

Video 1: An overview of the ENHANCE Gaming Attack Under Monitor Soundbar, demonstrating its features and compact design.

Maintenance

  • Cleaning: Use a soft, dry cloth to wipe the exterior of the soundbar. Avoid using liquid cleaners or abrasive materials.
  • Storage: When not in use for extended periods, store the soundbar in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Ensure all cables are free from kinks or damage. Do not pull on cables forcefully.

Troubleshooting

No Sound

  • Ensure the soundbar is powered on and the volume is turned up.
  • Verify that the correct audio input is selected on the soundbar.
  • Check that the audio cable is securely connected to both the soundbar and your device.
  • Confirm that your computer's audio output is set to the correct device and not muted.

LED Lights Not Working

  • Ensure the soundbar is powered on.
  • Press the LED mode button to cycle through modes, as the lights might be turned off or set to a static color.

Device Not Connecting via Bluetooth

  • This model primarily uses wired 3.5mm AUX connections. Bluetooth functionality is not explicitly listed as a primary connection method for this specific model in the provided features. Please refer to the product packaging or official website for confirmation of Bluetooth capabilities.

Specifications

  • Product Dimensions: 20 x 6.13 x 4.88 inches
  • Item Weight: 3.21 pounds
  • Item Model Number: ENPCSM2100BKUS-SALE
  • Connectivity Technologies: Auxiliary
  • Special Features: LED Customizable Lighting
  • Color: Black
  • Manufacturer: ENHANCE
  • Date First Available: November 13, 2019

Warranty and Support

The ENHANCE Gaming Attack Sound Bar PC Speaker comes with a 3-Year Warranty. For support or warranty claims, please refer to the contact information provided on your product packaging or the official ENHANCE website.

Related Documents - ENPCSM2100BKUS

Preview ENHANCE Infiltrate KL2 Multi-Color LED Gaming Keyboard User Guide
Official user guide for the ENHANCE Infiltrate KL2 Multi-Color LED Gaming Keyboard. Features include multi-color LED effects, anti-ghosting, and key rollover. Learn about setup, specifications, and warranty.
Preview Enhance Cryogen 5 XL Gaming Laptop Cooling Stand User Guide
User guide for the Enhance Cryogen 5 XL Gaming Laptop Cooling Stand, detailing setup, features, and warranty information.
Preview ENHANCE MD5 Mobile DUO Quick Start Guide - Setup and Testing
Concise guide to setting up and testing your ENHANCE MD5 Mobile DUO personal emergency response system. Learn about Connect Premium and Fall Button offers.
Preview Enhance Products Installation Guide & Support
Official installation information for Enhance products including Commander Gen2, S3XY Buttons, S3XY Knob, S3XY Stalks, and S3XY Strip. Access instructional videos, download the S3XY Gadgets app, and find technical support from SECTRON.
Preview ENHANCE Mobile On-the-Go System Quick Start Guide - Setup and Features
Get started quickly with the ENHANCE Mobile On-the-Go System (SOLO). This guide covers setup, testing, and details special offers like Connect Premium and the Fall Button for enhanced safety and protection.
Preview Enhance Product Installation Guide and Support Information
Find installation guides, setup instructions, and support details for Enhance products like Commander Gen2, S3XY Buttons, S3XY Knob, S3XY Stalks, and S3XY Strip. Includes app information and contact details for SECTRON s.r.o.