BLACK DIAMOND Kids Momentum Full Body Harness Instruction Manual

Introduction

This manual provides essential information for the safe and effective use of your BLACK DIAMOND Kids Momentum Full Body Harness. Please read all instructions carefully before use and retain this manual for future reference. This harness is designed to provide secure and adjustable full-body support for young climbers.

Product Overview

The BLACK DIAMOND Kids Momentum Full Body Harness is engineered for young climbers, offering comprehensive safety and comfort. Its design ensures that children remain upright and secure during climbing activities, preventing accidental inversion or slipping.

Image: The BLACK DIAMOND Kids Momentum Full Body Harness, featuring blue shoulder straps and grey leg loops, designed for full-body support.

Setup and Adjustment

Proper fitting and adjustment are crucial for the safety and comfort of the young climber. The harness features multiple adjustment points to accommodate growth and ensure a secure fit.

Putting on the Harness

1. Orient the Harness: Hold the harness by the shoulder straps. Ensure the padded back section is facing away from the child and the leg loops are hanging freely.
2. Step into Leg Loops: Guide the child to step into the leg loops, one leg at a time. The leg loops should sit comfortably around the upper thighs.
3. Position Shoulder Straps: Bring the shoulder straps over the child's shoulders. The padded sections should rest comfortably on the shoulders.
4. Secure Chest Buckle: Fasten the chest buckle, typically located at the front, ensuring it clicks securely.

Adjusting the Fit

• Shoulder Strap Adjustment: Use the buckles on the shoulder straps to tighten or loosen them. The straps should be snug but not restrictive, allowing for full range of motion.
• Leg Loop Adjustment: Adjust the leg loops for a snug fit. There should be enough room to slide a flat hand between the leg loop and the child's thigh, but no more.
• Torso Adjustment: The harness features a torso adjustment to ensure the full-body design fits correctly. Adjust as needed to keep the harness centered and prevent sagging.
• Final Check: After all adjustments, ensure all buckles are securely fastened and there are no twists in the webbing. The harness should fit snugly and comfortably, keeping the child upright.

Operating the Harness

The BLACK DIAMOND Kids Momentum Full Body Harness is designed for top-roping, gym sessions, and introductory outdoor climbing, providing full-body safety support.

• Tie-in Points: The harness features reinforced tie-in points, typically highlighted in a distinct color (e.g., red or orange). Always tie the climbing rope directly into these designated points. Ensure the knot is correctly tied and dressed.
• Belay Device Connection: When using a belay device, connect it to the designated belay loop or tie-in points as per the belay device manufacturer's instructions and climbing safety standards.
• Supervision: Constant and vigilant adult supervision is mandatory when a child is wearing and using the climbing harness. Never leave a child unattended while in the harness.
• Pre-Climb Check: Before each climb, perform a thorough safety check: verify all buckles are secure, straps are properly adjusted, and the rope is correctly tied into the designated tie-in points.

Maintenance

Proper maintenance extends the life of your harness and ensures continued safety.

• Cleaning: The harness should be cleaned by hand washing only. Use mild soap and lukewarm water. Rinse thoroughly to remove all soap residue.
• Drying: Air dry the harness completely in a cool, shaded area away from direct sunlight or heat sources. Do not machine dry.
• Storage: Store the harness in a cool, dry, dark place, away from chemicals, sharp objects, and extreme temperatures.
• Inspection: Regularly inspect the harness for any signs of wear, tear, cuts, abrasions, discoloration, or damage to stitching, webbing, or buckles. If any damage is found, discontinue use immediately and replace the harness.

Troubleshooting

If you encounter any issues with your harness, consider the following:

• Harness feels loose: Re-check all adjustment points (shoulder, leg, torso) to ensure they are tightened appropriately for a snug fit.
• Discomfort during use: Ensure the harness is correctly sized for the child and all padding is properly positioned. Adjust straps to relieve pressure points.
• Visible damage: Any visible damage to webbing, stitching, or buckles compromises safety. Do not attempt to repair the harness yourself. Replace it immediately.
• Unusual wear: If wear appears excessive for the amount of use, review your usage practices and inspect for any abrasive surfaces the harness might be rubbing against.

For persistent issues or concerns, contact BLACK DIAMOND customer support.

Specifications

Warranty Information

BLACK DIAMOND products are warranted against defects in material or workmanship for the reasonable lifetime of the product. For specific warranty details, claims, or to register your product, please refer to the official BLACK DIAMOND website or contact their customer service directly. Keep your proof of purchase for warranty claims.

Support Information

For further assistance, technical support, or inquiries regarding your BLACK DIAMOND Kids Momentum Full Body Harness, please visit the official BLACK DIAMOND website or contact their customer support team. Contact information can typically be found on the product packaging or the manufacturer's website.

Website: www.blackdiamondequipment.com