HiFiMAN HE6se V2 Audiophile Headphones User Manual

Introduction

The HiFiMAN HE6se V2 are full-size over-ear planar magnetic headphones designed for audiophiles seeking a transparent and natural audio reproduction. These headphones feature advanced planar magnetic technology and are engineered for high-fidelity sound.

What's in the Box

• HiFiMAN HE6se V2 Headphones
• Premium Stock Cable (Crystalline Copper and Crystalline Silver)
• 6.35mm Connector
• 4-pin XLR Connector

Image: The HiFiMAN HE6se V2 headphones, showcasing their full-size over-ear design and midnight blue finish.

Key Features

• Proprietary Planar Magnetic Technology: Delivers transparent and natural sound reproduction for complex recordings.
• High Power Requirement: Designed to be paired with a powerful amplifier, requiring 2 watts per channel or more for optimal performance.
• All-new Headband Design: Lighter and more adjustable for enhanced comfort during extended listening sessions.
• Angled 3.5mm Connectors: Angled at 10 degrees to reduce pressure and ensure a secure, long-lasting connection.
• Premium Stock Cable: Includes a Crystalline Copper and Crystalline Silver cable for optimal signal transmission with minimal loss.
• Comfortable Earpads: Features HIFIMAN's proprietary Focuspad with memory foam, pleather, and soft velour layers for unmatched comfort.

Setup

The HE6se V2 headphones are designed for wired connectivity and require a dedicated amplifier for optimal performance. Follow these general steps for setup:

1. Connect the Cable: Attach the provided premium stock cable to both headphone earcups. Ensure a firm connection.
2. Choose Your Connector: Select either the 6.35mm or 4-pin XLR connector based on your amplifier's input.
3. Connect to Amplifier: Plug the chosen connector into your audio amplifier. It is crucial to use an amplifier capable of delivering at least 2 watts per channel to properly drive these headphones.
4. Adjust Headband: Adjust the headband for a comfortable and secure fit on your head. The new design allows for easy adjustment.

Image: Close-up of the 6.35mm headphone connector, one of the included options for amplifier connection.

Image: Close-up of the 4-pin XLR headphone connector, providing a balanced connection option.

Operating Instructions

Once connected to a suitable amplifier, operate the HE6se V2 headphones as follows:

• Power On Amplifier: Turn on your audio amplifier and ensure it is set to the correct input.
• Volume Control: Start with the amplifier's volume at a low setting and gradually increase it to a comfortable listening level. Avoid excessively high volumes to prevent hearing damage and headphone damage.
• Source Playback: Begin playback from your audio source (e.g., music player, DAC).
• Comfort Adjustment: Periodically check the fit of the headphones during long listening sessions and adjust the headband or earpads as needed for continued comfort.

Maintenance

Proper maintenance will ensure the longevity and performance of your HiFiMAN HE6se V2 headphones:

• Cleaning: Use a soft, dry cloth to wipe down the earcups and headband. Avoid using harsh chemicals or abrasive materials.
• Earpad Care: The Focuspads are designed for durability, but gentle cleaning with a slightly damp cloth (water only) can be done if necessary. Allow to air dry completely before use.
• Cable Management: Store the cable neatly when not in use to prevent tangling and damage. Avoid sharp bends or excessive pulling.
• Storage: Store the headphones in a clean, dry place, away from direct sunlight and extreme temperatures.

Image: The comfortable Focuspads of the HE6se V2, made with memory foam, pleather, and velour layers.

Troubleshooting

If you encounter issues with your HE6se V2 headphones, consider the following common solutions:

• No Sound:
  • Ensure the cable is securely connected to both headphones and the amplifier.
  • Verify the amplifier is powered on and set to the correct input.
  • Check the volume level on your amplifier and audio source.
  • Test with a different audio source or amplifier if possible.
• Distorted Sound:
  • Reduce the volume level.
  • Ensure your amplifier meets the recommended power output (2 watts per channel or more).
  • Check the audio source for issues.
  • Inspect the cable for any damage.
• Uncomfortable Fit:
  • Adjust the headband sliders to find a more comfortable position.
  • Ensure the earpads are properly seated around your ears.

Specifications

Warranty and Support

HiFiMAN products are manufactured to the highest quality standards. For information regarding warranty coverage, technical support, or service, please refer to the official HiFiMAN website or contact their customer service directly. Keep your proof of purchase for warranty claims.