Product Overview
This manual provides instructions for the NPAUTO Interior Door Handle, designed as a direct replacement for the passenger side (front or rear) of various Nissan models. It is crafted from durable materials to ensure longevity and a precise fit.
- Interior Front or Rear, Passenger Side Door Handle
- Made from high-quality material for durability
- Designed for easy installation and a perfect fit
- Direct replacement for OE Part Number: 80670-3TA0D
Image: NPAUTO Interior Passenger Side Door Handle installed in a car interior.
Vehicle Compatibility
This interior door handle is compatible with the following Nissan vehicle models and years:
- 2013-2017 Nissan Altima Sedan
- 2013-2017 Nissan Pathfinder
- 2014 Nissan Pathfinder (Hybrid)
- 2015 Nissan Titan
- 2017 Nissan Titan Regular Cab
- 2017 Nissan Titan Crew Cab (With Black Lock)
- 2016-2017 Nissan Titan XD
- 2015 Nissan Armada
- 2015-2017 Nissan Murano
Image: Visual representation of compatible vehicle models.
Installation Instructions
The NPAUTO Interior Door Handle is designed for straightforward installation. Follow these general steps. For vehicle-specific details, consult your car's service manual or online resources.
Tools Required:
- Screwdriver set (Phillips and flathead)
- Plastic trim removal tools (recommended to prevent damage)
- Socket wrench set (if applicable)
General Installation Steps:
- Preparation: Ensure the vehicle is off and the window is rolled down for easier access to the door panel.
- Remove Door Panel: Carefully remove the interior door panel. This typically involves removing screws hidden under trim pieces, armrests, or door pulls, then gently prying the panel off. Refer to your vehicle's specific service manual for detailed door panel removal instructions.
- Disconnect Cables: Once the door panel is loose, disconnect any electrical connectors (e.g., for window switches, door locks) and the door handle cables/rods from the old handle assembly.
- Remove Old Handle: Unscrew and remove the existing interior door handle from the door panel.
- Install New Handle: Position the NPAUTO replacement handle (Model 80670-3TA0D) into the door panel opening. Secure it with the original screws.
- Reconnect Cables: Reattach the door handle cables/rods and any electrical connectors to the new handle assembly. Test the handle's function before reassembling the door panel.
- Reassemble Door Panel: Carefully align and reattach the door panel, ensuring all clips snap into place and screws are tightened.
Image: Top and bottom view of the NPAUTO Interior Door Handle, showing mounting points.
Image: Side view of the NPAUTO Interior Door Handle, illustrating its mechanism.
If you are unsure about any step, it is recommended to seek professional assistance or consult a vehicle-specific repair guide.
Operating the Door Handle
To open the door from the inside, simply pull the interior door handle towards you. Ensure the door is unlocked before attempting to open it. The handle is designed for smooth and consistent operation.
Care and Maintenance
Proper care will extend the life and maintain the appearance of your door handle.
- Cleaning: Wipe the handle surface with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or solvents that may damage the finish or material.
- Inspection: Periodically check the handle for any signs of looseness, cracks, or damage. Ensure the mechanism operates smoothly without excessive force.
- Lubrication: If the handle mechanism feels stiff over time, a small amount of automotive-grade silicone lubricant can be applied to the moving parts. Be careful not to get lubricant on visible surfaces.
Troubleshooting Common Issues
| Problem | Possible Cause | Solution |
|---|---|---|
| Door handle feels loose | Mounting screws are loose or plastic tabs are damaged. | Remove door panel and tighten mounting screws. If tabs are damaged, replacement may be necessary. |
| Door does not open when handle is pulled | Door is locked; cable/rod disconnected or damaged; internal latch mechanism failure. | Ensure door is unlocked. Remove door panel to inspect and reattach/replace the cable or rod. If the latch is faulty, professional repair is advised. |
| Handle is stiff or sticky | Lack of lubrication; debris in mechanism; internal component wear. | Clean the mechanism and apply a small amount of automotive lubricant. If the issue persists, internal wear may require replacement. |
Product Specifications
- Model Number: 80670-3TA0D
- Brand: NPAUTO
- Material: Metal, Plastic
- Color: Black
- Hand Orientation: Right (Passenger Side)
- Handle Type: Lever
- Attachment Mechanism: Screw
- Item Weight: 0.25 Pounds
- Unit Count: 1.0 Count
- Additional Features: Durable, Easy to Install
- OE Part Number: 80670-3TA0D
- UPC: 725766985001
Warranty Information
This NPAUTO Interior Door Handle (Model 80670-3TA0D) is backed by a 2-Year / 24-Month Warranty. This warranty covers manufacturing defects and material failures under normal use. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage resulting from improper installation, misuse, or normal wear and tear.
Customer Support
For any questions, concerns, or assistance with your NPAUTO Interior Door Handle, please contact our dedicated customer service team. Contact details can typically be found on your purchase platform or the official NPAUTO website.
Additionally, many online resources, such as video tutorials, are available for general automotive door handle replacement procedures. Searching for terms like "Nissan Altima interior door handle replacement" or "Nissan Pathfinder door panel removal" on video platforms may provide helpful visual guides for the installation process.