Introduction
Thank you for choosing Barrina T5 Grow Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new grow lights. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury to persons, please follow these guidelines:
- Always disconnect power before installing or servicing.
- Do not operate with a damaged cord or plug.
- Do not mount on uncured plaster, dusty, greasy, or rough surfaces.
- Ensure proper ventilation around the lights.
- This product is designed for indoor use only.
- Keep out of reach of children.
Package Contents
Your Barrina T5 Grow Lights package includes the following items:
- 4 x Barrina T5 Grow Lights
- 2 x Power Cords with ON/OFF Switch
- 3 x Connecting Cords (20 inches)
- 4 x Small Connectors
- 8 x Installation Clips
- 12 x Double-sided Tapes
- 12 x Cable Ties
Product Features
- Full Spectrum (Pinkish White Color): Provides indoor plants with a full-spectrum sunlight replacement, optimized for plant absorption.
- Super Bright and High PPFD: Consumes 40W with 200 LEDs, equivalent to 250W general plant lights. Over 95% light energy is absorbable by plants, suitable for seedling, vegetative, and flowering cycles.
- Easy Installation: Multiple mounting options including double-sided tapes, clips, and cable ties. Plug and play design allows linking up to 16 lights in a series.
- Separately Controllable: Each grow light features an individual ON/OFF switch on its surface, allowing separate or combined control based on plant needs.
Setup and Installation
The Barrina T5 Grow Lights offer flexible installation options to suit various setups. Ensure the mounting surface is clean, dry, and smooth for optimal adhesion if using tapes.
Mounting Options:
- Double-sided Tapes: Peel and stick the tapes to the desired surface, then firmly press the grow light onto the tapes.
- Clips and Screws: Secure the installation clips to the surface using the provided screws. Snap the grow lights into the clips.
- Cable Ties: Loop cable ties around the grow light and secure it to a suitable structure, such as a wire rack.
Connecting Multiple Lights:
You can link up to 16 lights in a series using the provided connecting cords or small direct connectors. This allows for a continuous lighting setup from a single power source.
- Connecting Cords: Use the 20-inch connecting cords to space lights apart.
- Small Connectors: Use these to directly link lights end-to-end for a seamless strip.
Video Guides for Installation:
Video 1: An overview of Barrina T5 Series Grow Lights, demonstrating their features and general setup.
Video 2: Provides an installation tip for neatly setting up Barrina T5 Grow Lights.
Video 3: A short demonstration of the easy installation process and positive plant response.
Operation
Operating your Barrina T5 Grow Lights is straightforward. Each light has an individual switch for flexible control.
Powering On/Off:
- Connect the power cord to a standard 120V outlet.
- Use the ON/OFF switch on the power cord to control all connected lights simultaneously.
- Each individual grow light also has its own ON/OFF switch on the surface of its housing, allowing you to control lights separately.
Light Spectrum and Plant Growth:
The Pinkish White full spectrum is designed to support plants through all growth stages: seedling, vegetative, and flowering. The specific light wave ratio is based on optimal plant absorption.
Hanging Distance Suggestion:
Adjust the distance between the lights and your plants based on their growth stage for optimal results:
- Germination / Seedling: 11.8-13.8 inches
- Vegetative / Growing: 11.8-13.8 inches
- Flowering / Fruiting: 7.9-11.8 inches
Video Comparing Light Spectrums:
Video 4: A comparison between the Pinkish White and Yellow Barrina Grow Lights, detailing their uses and benefits for different plant needs.
Maintenance
To ensure the longevity and optimal performance of your Barrina T5 Grow Lights, follow these simple maintenance tips:
- Cleaning: Gently wipe the lights with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- Mounting Surface: Avoid mounting on uncured plaster, dusty, greasy, or rough surfaces to prevent damage or detachment.
- Dust Cap: When not connected to another fixture, please cover the open end with the provided dust cap to protect the connector.
Troubleshooting
If you encounter any issues with your Barrina T5 Grow Lights, refer to the following common troubleshooting steps:
- Lights Not Turning On: Check if the power cord is securely plugged into the outlet. Ensure both the main power cord switch and the individual light switches are in the ON position.
- Uneven Lighting: Verify that all connecting cords and small connectors are properly seated between the lights.
- Flickering Lights: Ensure stable power supply. If flickering persists, try connecting fewer lights in a series to rule out overload.
If the problem persists after attempting these steps, please contact Barrina customer support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | MF10 |
| Color | Pinkish White |
| Shape | Rectangular |
| Material | Polycarbonate (PC) |
| Finish Type | Matte |
| Light Source Type | LED |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Light Source Wattage | 10 Watts |
| Mounting Type | Inside Mount |
| Light Source Special Features | Not Dimmable |
| Number of Light Sources | 200 |
| Item Weight | 1.8 Pounds |
| Item Dimensions L x W x H | 23.1"L x 0.79"W x 0.79"H |
| Shade Material | Aluminum |
Warranty
Barrina T5 Grow Lights come with a 2-year warranty. Please retain your proof of purchase for any warranty claims.
Support
For further assistance, product information, or to address any issues, please visit the official Barrina website or contact customer support:
- Barrina Store: Visit the Barrina Store on Amazon