ULANZI G8-7

ULANZI G8-7 Battery Cover Instruction Manual for GoPro Hero 8 Black

Model: G8-7 | Brand: ULANZI

1. Introduction

Thank you for choosing the ULANZI G8-7 Battery Cover. This accessory is specifically designed for the GoPro Hero 8 Black camera, providing convenient access to the USB Type-C port for charging and external microphone adapters without needing to remove the entire battery door. This manual provides detailed instructions for installation, operation, and important considerations for optimal use.

2. Product Features

  • USB Port Access: The battery side door allows access to the USB Type-C port while the battery and SD card remain securely covered.
  • Continuous Charging: Features a Type-C charging port, enabling the use of a power bank for extended recording sessions, ideal for time-lapse or long videos.
  • Microphone Adapter Connection: Provides a connection point for a microphone adapter, facilitating the use of external microphones for enhanced audio quality, perfect for vlogging.
  • Durable Material: Constructed from CNC Aluminum Alloy, offering a lightweight yet durable design that is resistant to breakage and effectively protects the camera's side from sharp objects.
  • Internal Protection: Includes a built-in sponge for shock and pressure reduction, safeguarding both the battery and camera from potential damage.

Note: This battery cover is NOT waterproof. Using it in wet conditions may damage your camera.

3. Setup and Installation

Follow these steps to install the ULANZI G8-7 Battery Cover on your GoPro Hero 8 Black camera:

  1. Remove Original Battery Cover: Carefully open the original battery door of your GoPro Hero 8 Black. Gently slide it off its hinge to detach it.
  2. Prepare ULANZI G8-7 Cover: Take the ULANZI G8-7 Battery Cover. Observe its design, noting the integrated Type-C port opening.
  3. Attach New Cover: Align the hinge of the ULANZI G8-7 cover with the corresponding slot on your GoPro Hero 8 Black. Push it firmly into place until it snaps securely. Ensure the cover is properly seated and can open and close smoothly.
A hand carefully removing the original battery cover from a GoPro Hero 8 Black camera.

Figure 3.1: Removing the original GoPro Hero 8 Black battery cover.

Comparison image showing the original GoPro Hero 8 Black battery cover next to the ULANZI G8-7 Battery Cover, highlighting the Type-C port access on the ULANZI cover.

Figure 3.2: Comparison of original and ULANZI G8-7 battery covers.

The ULANZI G8-7 Battery Cover, detached, showcasing its design and the integrated Type-C port opening.

Figure 3.3: ULANZI G8-7 Battery Cover with Type-C port opening.

A hand installing the ULANZI G8-7 Battery Cover onto a GoPro Hero 8 Black camera.

Figure 3.4: Installing the ULANZI G8-7 Battery Cover.

Video 3.1: Official ULANZI guide demonstrating the installation of the G8-7 Battery Cover on a GoPro Hero 8 Black and connecting a Type-C cable.

4. Operating Instructions

Once the ULANZI G8-7 Battery Cover is installed, you can utilize its features:

  • Charging: Insert a USB Type-C cable into the exposed port on the battery cover. This allows you to charge your GoPro Hero 8 Black or power it with a power bank for extended use without opening the battery compartment.
  • External Microphone: Connect a compatible microphone adapter to the Type-C port to use an external microphone for improved audio recording.
ULANZI G8-7 Battery Cover installed on a GoPro Hero 8 Black, with a USB-C cable connected for charging.

Figure 4.1: GoPro Hero 8 Black with ULANZI G8-7 cover and connected USB-C cable.

Close-up view of the Type-C charging port on the ULANZI G8-7 Battery Cover, with a USB-C cable being inserted.

Figure 4.2: Close-up of Type-C port with cable insertion.

5. Maintenance

  • Keep the battery cover clean from dust and debris. Use a soft, dry cloth for cleaning.
  • Avoid exposing the cover to harsh chemicals or abrasive materials.
  • Regularly check the hinge mechanism for any signs of wear or damage.
  • Store the cover in a dry place when not in use.

6. Troubleshooting

  • Difficulty Installing/Removing: The cover is designed for a snug fit. Ensure proper alignment with the hinge pins. If it feels excessively tight, apply gentle, even pressure. Avoid forcing it to prevent damage.
  • Loose Fit: If the cover feels loose after installation, double-check that it is fully snapped into place on both hinge pins.
  • Charging Issues: Ensure the USB Type-C cable is fully inserted into the port on the cover and connected to a working power source. Verify that your GoPro Hero 8 Black is powered on or in a charging state.
  • Water Resistance Concerns: As noted, this battery cover is NOT waterproof. If you require water protection for your GoPro, you must use the original, fully sealed battery door or a waterproof housing. The open Type-C port on this cover will compromise the camera's water resistance.

7. Specifications

FeatureDetail
BrandULANZI
Model NumberG8-7
Compatible DevicesGoPro Hero 8 Black Cameras
MaterialCNC Aluminum Alloy
ColorBlack
Mounting TypeDoor Mount
Special FeatureRemovable, Type-C Charging Port Access
Water Resistance LevelNot Waterproof
Item Dimensions2.36 x 2.36 x 1.57 inches

8. Warranty and Support

For warranty information and customer support, please refer to the official ULANZI website or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.