1. Product Overview
The Wandini Glow.0 LED Light Magic Wand is a collapsible, USB rechargeable levitation stick designed for smooth tricks and visual performances. It features a patented design and is carefully weighted for optimal vertical balance. This manual provides essential information for the safe and effective use of your Wandini Glow.0.
Image: Wandini Glow.0 LED Light Magic Wand in action, demonstrating light trails.
2. Package Contents
Please ensure all items are present before proceeding with setup:
- 1 x Wandini Glow.0 LED Light Magic Wand (consisting of 1 top piece, 1 bottom piece, and 1 middle electronic section with string and finger loop)
- 1 x Micro USB Charging Cable
Image: All components included in the Wandini Glow.0 package.
3. Setup Instructions
- Unpack Components: Carefully remove all items from the packaging.
- Assemble the Wand: The Wandini Glow.0 is designed to be collapsible for portability. To assemble, screw the top and bottom wand pieces securely into the middle electronic section. Ensure they are firmly attached to prevent detachment during use. The wand will extend to its full 24-inch length once assembled.
- Inspect String and Finger Loop: Verify that the invisible string and vegan leather finger loop are securely attached to the middle electronic section.
- Initial Charge: Before first use, fully charge the wand using the provided USB cable. Refer to the 'Charging Instructions' section for details.
Image: Visual guide for assembling the Wandini Glow.0.
4. Operating Instructions
- Power On/Off: Locate the power button on the middle electronic section of the wand. Press and hold the button for approximately 2-3 seconds to turn the wand on or off.
- Change Color Modes: Once powered on, short press the power button to cycle through the 22 dynamic color modes and patterns.
- Customizable Setting: One of the modes is customizable. Refer to the 'Color Modes' section for more information on how to adjust this setting (if applicable, specific customization steps are not detailed in provided data).
- Using the Finger Loop: Place the vegan leather finger loop around your middle finger. The invisible string should extend from the loop to the wand, allowing for levitation effects. Practice gentle movements to control the wand's motion.
5. Charging Instructions
The Wandini Glow.0 features a built-in rechargeable battery. Follow these steps to charge your device:
- Connect Cable: Insert the micro USB end of the provided charging cable into the charging port on the middle electronic section of the wand.
- Connect to Power: Plug the USB-A end of the cable into a compatible USB power source (e.g., computer USB port, USB wall adapter).
- Charging Indicator: The wand will typically display a light indicator during charging. Refer to the product packaging or manufacturer's website for specific indicator behavior (e.g., solid light, blinking light, color change).
- Charging Time: A full charge takes less than 30 minutes and provides up to 7 hours of continuous use.
- Disconnect: Once fully charged, disconnect the charging cable from both the wand and the power source.
Image: Wandini Glow.0 connected to a USB power source for charging.
6. Color Modes
The Wandini Glow.0 offers 22 vibrant color light modes and patterns, including 21 preset options and 1 customizable setting. These modes allow for diverse visual effects during performances. Experiment with different modes by short-pressing the power button to find your preferred display.
Image: Illustrations of different color and light patterns.
7. Maintenance
- Cleaning: Wipe the wand with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: When not in use, disassemble the wand for compact storage. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the wand regularly, even if not in active use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wand does not turn on. | Battery is discharged. | Charge the wand fully using the provided USB cable. |
| Wand pieces detach during use. | Wand pieces are not securely screwed together. | Ensure both top and bottom pieces are firmly screwed into the middle electronic section. |
| Light is dim or inconsistent. | Low battery or internal issue. | Recharge the wand. If the issue persists, contact customer support. |
9. Specifications
- Brand: Wandini
- Model Number: WD01
- UPC: 860001007640
- Material Type: Synthetic material or plastic
- Item Weight: 9 Ounces (255 grams)
- Item Dimensions (Assembled): Approximately 24 inches (635 mm) in length
- Power Source: Rechargeable Battery
- Supported Battery Types: Built-in rechargeable battery (1 Lithium Ion battery included)
- Charging Time: Less than 30 minutes
- Battery Life: Up to 7 hours
- Color Modes: 22 (21 preset + 1 customizable)
- Age Range: Kid (Manufacturer Minimum Age: 96 months)
- Indoor/Outdoor Usage: Indoor
- Assembly Required: No (collapsible design for quick assembly/disassembly)
10. Warranty and Support
Wandini is committed to customer satisfaction. While specific warranty details are not provided in this manual, if you encounter any issues or require assistance with your Wandini Glow.0 LED Light Magic Wand, please contact Fun In Motion Toys customer support. Their Happiness Engineers are available to assist you.
For further information or to explore other products, visit the official Wandini storefront or the Fun In Motion Toys website.