JONATHAN Y JYL6401C Watts 13.25" 1-Light Mid-Century Modern Iron/Glass LED Pendant Instruction Manual

1. Product Overview

The JONATHAN Y JYL6401C Watts 13.25" 1-Light Mid-Century Modern Iron/Glass LED Pendant is a contemporary lighting fixture designed to enhance various living spaces such as bedrooms, dining rooms, hallways, kitchens, and living rooms. This pendant light features a classic glass design with modern upgrades, including chromed metal, adjustable hanging lengths, and LED compatibility for energy efficiency and reduced bulb replacement frequency.

Figure 1: Front view of the JONATHAN Y JYL6401C Pendant Light.

2. Safety Information

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be fatal or cause permanent damage. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician or inspector if you are unfamiliar with proper electrical wiring connections.

• WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Always disconnect power at the main circuit breaker before installation or maintenance.
• Ensure all connections are secure and properly insulated.
• Do not exceed the maximum wattage specified for the bulb.
• Handle glass components with care to prevent breakage.

3. Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact JONATHAN Y customer support immediately.

Figure 2: Exploded view of the pendant light components and included parts.

• Pendant Light Fixture (Glass Shade, Metal Rods, Canopy)
• Mounting Hardware (Mounting Plate, Screws, Wire Nuts)
• LED Bulb(s) (E26 base, Warm White, 420 Lumen)
• Instruction Manual (This document and a PDF version)

4. Setup and Installation

For detailed installation steps, please refer to the official Installation Manual PDF: Download Installation Manual (PDF).

This pendant light is designed for ceiling mount installation and is compatible with sloped ceilings. The height is adjustable from 27 inches to 57 inches (68.6 cm to 144.8 cm) to suit your space requirements.

Figure 3: Product dimensions and sloped ceiling compatibility.

Key Installation Features:

Figure 4: Diagram highlighting key features for installation and use.

• Sloped Ceiling Compatible: Can be installed on angled ceilings.
• Adjustable Height: Customize the hanging length to fit your space.
• Easy Assembly: Designed for straightforward installation.
• LED Bulb(s) Included: Comes with energy-efficient LED bulbs.

5. Operating Instructions

The JYL6401C pendant light operates via a standard on/off wall switch. It is also dimmable, allowing you to adjust the light intensity to create the desired ambiance. Ensure you use a compatible dimmer switch (not included) for dimming functionality.

Figure 5: Visual comparison of the pendant light in off and on states, demonstrating its illumination.

The included LED bulb provides warm white light with a brightness of 420 lumens and a color temperature of 2700 Kelvin, consuming 60 watts at 120 volts.

6. Maintenance

To maintain the appearance and functionality of your pendant light, follow these simple maintenance guidelines:

• Cleaning: Disconnect power before cleaning. Wipe the metal and glass surfaces with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish.
• Bulb Replacement: The design of this pendant light allows for easy bulb replacement. Simply reach into the open glass shade to unscrew and replace the E26 base LED bulb. No disassembly of the fixture is required.
• Regular Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

7. Troubleshooting

If you encounter any issues with your pendant light, please refer to the following common troubleshooting steps:

• Light does not turn on:
  • Check the circuit breaker to ensure power is supplied to the fixture.
  • Verify that the light bulb is securely screwed into the socket and is not burnt out.
  • Ensure all wiring connections are correct and secure.
• Light flickers:
  • Confirm the bulb is fully tightened.
  • If using a dimmer, ensure it is compatible with LED bulbs.
  • Check for loose wiring connections.
• Glass shade is loose:
  • Carefully tighten any retaining rings or screws that secure the glass shade.

If the issue persists after attempting these steps, please contact JONATHAN Y customer support for further assistance.

8. Specifications

9. Warranty and Support

Warranty: This product comes with a 30-day manufacturer warranty for defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival and we do not accept worn, dirty, or stained merchandise.

For warranty information or support, please call the internet customer service center. You can also visit the JONATHAN Y store for more products and information: JONATHAN Y Store.