Introduction
Thank you for choosing the PURPLE LEAF 10' x 13' Rectangular Cantilever Patio Umbrella. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor umbrella. Please read all instructions carefully before use and retain this manual for future reference.
Safety Information
- Always ensure the umbrella base is adequately weighted and stable before opening the canopy. Refer to the base manufacturer's instructions for proper weighting.
- Do not use the umbrella in strong winds, heavy rain, or other severe weather conditions. Close and secure the canopy to prevent damage or injury.
- Keep children and pets away from the umbrella during opening and closing operations.
- Avoid placing the umbrella near open flames or heat sources.
- Regularly inspect all components for wear, damage, or loose connections. Do not use if any part is damaged.
- Ensure the canopy is fully dry before closing and storing for extended periods to prevent mold and mildew.
Package Contents
Verify that all components are present before beginning assembly:
- Umbrella Canopy (1)
- Main Pole Assembly (1)
- Crank Handle (1)
- Base Connector (1)
- Protective Cover (1)
- Assembly Hardware (bolts, washers, nuts, tools)
Note: The patio umbrella base is NOT included and must be purchased separately. Recommended bases include PURPLE LEAF DY1150 water tank base, anchor ground base, or steel plate base.
Assembly Instructions
Follow these steps to assemble your PURPLE LEAF Cantilever Patio Umbrella:
- Prepare the Base: Ensure your chosen umbrella base is properly weighted with sand or water according to its specific instructions. Place the base in the desired location on a flat, stable surface.
- Attach the Main Pole: Securely attach the main pole assembly to the base connector using the provided hardware. Ensure all bolts are tightened.
- Mount the Canopy: Carefully lift the umbrella canopy and slide it onto the top of the main pole. Align the locking mechanisms and secure the canopy in place. This step may require two people due to the size and weight of the canopy.
- Final Checks: Verify that all connections are tight and the umbrella is stable before proceeding to operation.
Operating Instructions
Your PURPLE LEAF cantilever umbrella features an intuitive crank system for easy operation.
Opening the Umbrella:
- Release any securing straps around the folded canopy.
- Locate the main crank handle on the side of the pole. Turn the crank clockwise to slowly extend the canopy. Ensure the fabric does not snag on any part of the frame.
- Continue cranking until the canopy is fully open and taut.
Tilting and Rotating the Canopy:
The umbrella offers 6 height and angle adjustments and 360-degree rotation for optimal shade positioning.
- Tilting: Use the tilt mechanism (often a separate handle or button) to adjust the angle of the canopy. This allows you to block sun from various angles throughout the day.
- Rotation: The entire canopy can be rotated 360 degrees around the main pole. This feature enables you to easily reposition the shade without moving the heavy base.
Closing the Umbrella:
- If tilted, return the canopy to its upright position.
- Turn the main crank handle counter-clockwise to retract the canopy.
- Once fully closed, secure the canopy with the attached straps to keep it compact and prevent wind damage.
Maintenance
Proper maintenance will extend the life of your umbrella:
- Cleaning: Clean the canopy fabric regularly with mild soap and water. Rinse thoroughly and allow to air dry completely before closing. Do not use harsh chemicals or abrasive cleaners.
- Frame Care: Wipe down the aluminum frame with a damp cloth to remove dirt and debris.
- Lubrication: Periodically lubricate moving parts of the crank and tilt mechanisms with a silicone-based spray to ensure smooth operation.
- Storage: During off-season or prolonged periods of non-use, close the umbrella, cover it with the provided protective cover, and store it in a dry, sheltered area.
Troubleshooting
Refer to the table below for common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Umbrella won't open/close smoothly | Mechanism jammed or dirty; lack of lubrication. | Check for obstructions. Clean and lubricate the crank and tilt mechanisms. |
| Canopy sags or is not taut | Not fully cranked open. | Continue turning the crank until the canopy is fully extended and taut. |
| Umbrella is unstable | Base not adequately weighted or improperly installed. | Ensure the base is filled with sufficient sand/water and securely attached to the pole. Place on a level surface. |
| Canopy color fading | Prolonged exposure to direct sunlight. | While the fabric is UV resistant, prolonged exposure can still cause some fading over time. Use the protective cover when not in use. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 118.11 x 118.11 x 98.43 inches (10' x 13' canopy) |
| Item Weight | 49.9 pounds |
| Brand | PURPLE LEAF |
| Color | Beige |
| Canopy Material | 240/gsm yarn-dyed polyester fabric |
| Frame Material | All-aluminum pole and alloy steel ribs |
| Special Features | Fade Resistant, Heavy Duty Fabric, UV Resistant, Vented, Waterproof, Windproof, Water Repellent, 6-position tilt, 360-degree rotation |
Warranty and Support
For warranty information, product support, or to purchase replacement parts, please refer to the documentation included with your purchase or contact PURPLE LEAF customer service directly. Keep your purchase receipt as proof of purchase.
