JBL JBLT115BTCORAM
JBL TUNE 115BT Wireless In-Ear Headphone Instruction Manual
Model: JBLT115BTCORAM
Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your JBL TUNE 115BT Wireless In-Ear Headphones. Please read this manual thoroughly before using your device to ensure optimal performance and longevity.

Figure 1: JBL TUNE 115BT Wireless In-Ear Headphones
What's in the Box
- JBL TUNE 115BT Headphone
- 3 sets of Ear-tips (S, M, L)
- Charging Cable (Micro USB)

Figure 2: Included Accessories - Charging Cable and Ear-tips
Setup
1. Charging the Headphones
Before first use, fully charge your JBL TUNE 115BT headphones. Connect the supplied Micro USB charging cable to the charging port on the inline remote and to a USB power source. A full recharge takes approximately 2 hours. For quick use, a 15-minute charge provides up to 1 hour of playback.
2. Selecting Ear-tips
For optimal sound quality and comfort, choose the ear-tip size that best fits your ears. Three sizes (S, M, L) are provided. Experiment with different sizes to find the most secure and comfortable fit.

Figure 3: Earbud with Ear-tip
3. Bluetooth Pairing
- Turn on the JBL TUNE 115BT headphones by pressing and holding the power button on the inline remote until the LED indicator flashes blue.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "JBL TUNE 115BT" from the list of found devices.
- Once connected, the LED indicator will turn solid blue.
4. Multi-Point Connection
The JBL TUNE 115BT supports multi-point connection, allowing you to seamlessly switch between two connected Bluetooth devices. For example, you can watch a video on your tablet and instantly switch to answer a call on your mobile phone without re-pairing.
Operating the Headphones
Inline Remote Control
The JBL TUNE 115BT features a 3-button inline remote with an integrated microphone for convenient control of your audio and calls.

Figure 4: Inline Remote Control
| Button/Action | Function |
|---|---|
| Power Button (Center) | Press and hold to Power ON/OFF. Press once to Play/Pause music, Answer/End call. Double press to activate voice assistant. |
| Volume Up (+) | Press once to increase volume. Press and hold for next track. |
| Volume Down (-) | Press once to decrease volume. Press and hold for previous track. |
Audio Playback
The JBL TUNE 115BT delivers JBL Pure Bass Sound, providing a deep and powerful audio experience. Use the inline remote to control playback (play, pause, skip tracks) and adjust volume.
Making and Receiving Calls
With the built-in microphone, you can make and receive hands-free calls. Use the center button on the remote to manage calls as described in the table above.
Maintenance
Cleaning
Regularly clean your headphones to maintain hygiene and performance. Use a soft, dry cloth to wipe the earbuds and remote. For ear-tips, you can gently remove them and clean with a damp cloth and mild soap, then rinse and dry thoroughly before reattaching.
Storage
When not in use, the magnetic earbuds ensure the headphones remain securely around your neck, preventing tangles. For longer storage, keep the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
Battery Care
To prolong battery life, avoid fully discharging the headphones frequently. Charge them regularly, even if not in constant use.
Troubleshooting
If you encounter issues with your JBL TUNE 115BT headphones, refer to the common problems and solutions below:
- No Power: Ensure the headphones are charged. Connect to a power source using the charging cable.
- Cannot Pair:
- Make sure Bluetooth is enabled on your device.
- Ensure the headphones are in pairing mode (LED flashing blue).
- If previously paired, try "forgetting" the device on your phone's Bluetooth settings and re-pairing.
- Move the headphones closer to your device.
- No Sound or Low Volume:
- Check the volume levels on both the headphones and your connected device.
- Ensure the headphones are properly connected to your device.
- Try playing different audio sources.
- Poor Sound Quality:
- Ensure the ear-tips provide a good seal in your ear canal.
- Move away from sources of interference (e.g., Wi-Fi routers, other Bluetooth devices).
- Check if the audio source quality is high.
Product Video
Video 1: Overview of JBL TUNE 115BT Wireless In-Ear Headphones. This video highlights key features such as JBL Pure Bass Sound, 3-button remote control with microphone for hands-free calls, volume control, universal phone control, magnetic cable for tangle-free wear, lightweight design, ergonomic ear-tips, neckband design, flat cable construction, Bluetooth connectivity, multi-point connection, 8-hour battery life, 2-hour full recharge time, and 15-minute quick charge for 1-hour playback. It also mentions seamless device switching and availability in 6 colors.
Specifications
| Feature | Detail |
|---|---|
| Model Name | JBL TUNE 115BT - Coral |
| Model Number | JBLT115BTCORAM |
| Brand | JBL |
| Connectivity Technology | Bluetooth |
| Bluetooth Version | 5.0 |
| Noise Control | Passive Noise Cancellation |
| Battery Life | Up to 8 Hours |
| Charging Time | 2 Hours (full charge) |
| Audio Driver Type | Dynamic Driver |
| Frequency Range | 20 Hz - 20,000 Hz |
| Impedance | 16 Ohm |
| Item Weight | 19.02 Grams (0.671 ounces) |
| Product Dimensions | 3.94 x 1.36 x 6.3 inches |
| Material | Plastic |
| Water Resistance Level | Not Water Resistant |
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official JBL website. For technical support, product registration, or further assistance, please visit the JBL support page or contact their customer service directly.
- Official JBL Website: www.jbl.com
- JBL Support Page: support.jbl.com
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.