1. Introduction and Overview
The Sangean WR-16SE is a 45th Anniversary Special Edition AM/FM/Bluetooth/Aux-in/USB radio, designed with a solid walnut veneer finish and rose gold accents. This manual provides comprehensive instructions for setting up, operating, and maintaining your radio, ensuring optimal performance and longevity.
Figure 1: Front view of the Sangean WR-16SE radio, showcasing its elegant dark walnut cabinet and rose gold control panel.
2. Product Features
- AM/FM Analog Radio: Enjoy clear reception of your favorite AM and FM stations.
- Built-In Bluetooth Technology: Version 4.1 Class II for seamless wireless audio streaming from compatible devices.
- Soft and Precise Vernier Tuning: Features tuning and band indicators for accurate station selection.
- Deep Bass Compensation: Equipped with a 3-inch, 10-watt full-range speaker for rich bass.
- Auxiliary Input: Connect external audio sources such as MP3 players and CD players.
- USB Phone Charging: Convenient USB port for charging your mobile devices.
- Solid Walnut Veneer Cabinet: Aesthetically pleasing and durable wooden cabinet with rose gold plates.
3. Setup
3.1 Unpacking
Carefully remove the radio and all accessories from the packaging. Ensure all components listed in the "Included Components" section are present.
3.2 Power Connection
- Locate the AC power input on the rear of the radio.
- Connect the provided power cord to the radio's AC input.
- Plug the other end of the power cord into a standard 120V AC, 60Hz wall outlet.
Figure 2: Rear view of the Sangean WR-16SE, highlighting the power input and various connection ports.
3.3 Antenna Connection
For optimal FM reception, connect the included external FM wire antenna to the "FM-EXT. 75Ω" terminal on the back of the radio. For AM reception, the radio has a built-in AM antenna. If needed, an external AM antenna can be connected to the "AM-EXT." terminals.
4. Operating Instructions
4.1 Power On/Off
Rotate the VOLUME knob clockwise from the "OFF" position to turn the radio on. Rotate it counter-clockwise to the "OFF" position to turn the radio off.
4.2 AM/FM Radio Tuning
- Select either FM or AM using the band selector knob.
- Rotate the TUNE knob to select your desired radio station. The tuning indicator will illuminate when a strong signal is received.
Figure 3: The Sangean WR-16SE radio in a home setting, illustrating its compact size and user-friendly controls.
4.3 Bluetooth Pairing
- Switch the band selector knob to BT (Bluetooth) mode. The Bluetooth indicator on the display will flash, indicating it's in pairing mode.
- On your Bluetooth-enabled device, search for "Sangean WR-16SE" in the Bluetooth settings.
- Select the radio to pair. Once connected, the Bluetooth indicator will stop flashing and remain solid.
- You can now stream audio from your device to the radio.
4.4 Auxiliary Input
To play audio from an external device, connect a 3.5mm audio cable from your device's headphone jack or line-out to the AUX IN port on the back of the radio. Select AUX using the band selector knob.
4.5 USB Phone Charging
Connect your USB charging cable to the CHARGE 5V 1A port on the back of the radio to charge compatible mobile devices. Note that this port is for charging only and does not support data transfer.
Video 1: Official Sangean video demonstrating the craftsmanship of the wooden cabinet used in their radios, including the WR-16SE model.
5. Maintenance
5.1 Cleaning
Wipe the radio's surface with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. For the wooden cabinet, a wood-safe cleaner can be used sparingly if necessary, followed by a dry polish.
5.2 Storage
When not in use for extended periods, store the radio in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect the power cord before storage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not properly connected or outlet is not active. | Ensure power cord is securely plugged into the radio and a working wall outlet. |
| Poor radio reception | Weak signal, improper antenna positioning, or interference. | Adjust the external FM antenna. For AM, try rotating the radio for better signal. Move away from electronic devices causing interference. |
| Bluetooth not connecting | Radio not in pairing mode, device too far, or previously paired. | Ensure radio is in BT mode and indicator is flashing. Move device closer. Forget the device on your phone and re-pair. |
| No sound from AUX input | Incorrect mode selected, cable not fully inserted, or external device volume too low. | Select AUX mode. Ensure audio cable is fully inserted into both devices. Increase volume on both the radio and the external device. |
7. Specifications
- Model: WR-16SE
- Brand: Sangean
- Dimensions (L x W x H): 9.4" x 6.75" x 4.62"
- Weight: 1 pound
- Color: Dark Walnut
- Tuner Technology: FM, AM
- Radio Bands Supported: AM/FM
- Connectivity Technology: Bluetooth (v4.1 Class II), Auxiliary, USB (for charging)
- Power Source: Corded Electric (AC 120V ~ 60Hz)
- Speaker: 3-inch, 10 Watts Full Range
8. Safety Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please refer to the official product documentation.
- Do not expose the radio to rain or moisture.
- Do not open the radio casing; there are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Ensure proper ventilation and avoid placing the radio near heat sources.
9. Warranty and Support
For detailed warranty information, technical support, and additional resources, please refer to the official Owner's Manual. A digital copy of the Owner's Manual can be accessed via the following link: