Philips HC5610/15 Hair Clipper User Manual

1. Important Safety Information

Please read this instruction manual carefully before using the appliance and save it for future reference. Incorrect use may lead to hazards.

• Do not use on infants.
• Keep the appliance away from water sources.
• Follow recommended cleaning and maintenance instructions to prevent skin irritation or eye injuries caused by cutting blades.
• This appliance is designed for cutting hair and beard only. Do not use it for any other purpose.
• Always check the appliance for damage before use. Do not use if damaged.

2. Product Overview

The Philips HC5610/15 Hair Clipper is designed for efficient and comfortable hair and beard trimming. It features self-sharpening stainless steel blades and a Trim-n-Flow Pro technology to prevent hair from getting stuck.

Image 1: Philips HC5610/15 Hair Clipper with its included comb attachments. The main unit is white and black, showing the power button and length setting indicator. Two adjustable hair combs and one beard comb are displayed next to it.

Key Features:

• 28 Length Settings: From 0.5 mm to 28 mm, with 2 adjustable hair combs and a 2 mm beard comb.
• Trim-n-Flow Pro Technology: Prevents hair from getting stuck in the comb for an uninterrupted trim.
• Self-Sharpening Stainless Steel Blades: Designed for long-lasting sharpness and durability, requiring no lubrication.
• 100% Washable: Easy cleaning by rinsing under running water.
• Corded and Cordless Use: Bivolt and rechargeable for flexible use.

3. Setup and Charging

3.1 Initial Charge

Before first use, fully charge the appliance. A full charge takes approximately 6 hours and provides ample operating time for multiple uses.

• Ensure the appliance is switched off.
• Connect the power cord to the appliance and then to a power outlet.
• The charging indicator light will illuminate.
• Once fully charged, disconnect the appliance from the power outlet.

3.2 Attaching Combs

The clipper comes with two adjustable hair combs (3-28mm) and one beard comb (2mm). To attach a comb:

1. Select the desired comb.
2. Align the comb with the grooves on the clipper head.
3. Push the comb firmly until it clicks into place.

To remove a comb, gently pull it upwards from the clipper head.

4. Operating Instructions

4.1 Selecting Cutting Length

The clipper offers 28 length settings. With the comb attached, rotate the length setting wheel to select your desired length. The selected length will be displayed on the appliance.

• Use the 2mm beard comb for stubble or short beard styles.
• Use the adjustable hair combs for lengths between 3mm and 28mm.
• For a closer cut of 0.5mm, remove the comb attachment entirely.

Image 2: A person using the Philips HC5610/15 Hair Clipper to trim their hair, demonstrating typical use.

4.2 Trimming Hair and Beard

1. Ensure your hair is clean and dry.
2. Attach the desired comb or use without a comb for a 0.5mm cut.
3. Adjust the cutting length.
4. Press the power button to turn on the appliance.
5. Move the clipper slowly against the direction of hair growth.
6. The Trim-n-Flow Pro technology helps prevent hair from getting stuck, allowing for a continuous trimming experience.
7. After trimming, turn off the appliance.

5. Cleaning and Maintenance

Regular cleaning ensures optimal performance and extends the lifespan of your Philips HC5610/15 Hair Clipper.

5.1 Cleaning the Appliance

The appliance is 100% washable for quick and easy cleaning.

Image 3: The Philips HC5610/15 Hair Clipper being rinsed under running water, illustrating its 100% washable feature.

1. Turn off the appliance and disconnect it from the power supply if connected.
2. Remove any attached comb.
3. Rinse the clipper head and the comb under running tap water.
4. Use the provided cleaning brush to remove any stubborn hair particles from the blades.
5. Shake off excess water and allow all parts to air dry completely before storing or reattaching combs.

5.2 Blade Maintenance

The self-sharpening stainless steel blades of the Philips HC5610/15 do not require lubrication. They are designed to maintain their sharpness over time without additional oiling.

6. Troubleshooting

7. Technical Specifications

• Model Number: HC5610/15
• Brand: PHILIPS
• Product Name: Hair Clipper
• Blade Material: Self-sharpening Stainless Steel
• Length Settings: 28 (0.5mm to 28mm)
• Combs Included: 2 adjustable hair combs (3-28mm), 1 beard comb (2mm)
• Cleaning: 100% Washable
• Power Source: Electric (Corded and Cordless use)
• Voltage: Bivolt (110-220 Volts)
• Charging Time: Approximately 6 hours
• Product Dimensions: 6.9 x 14 x 22.4 cm
• Product Weight: 415 g
• Country of Origin: Indonesia

8. Warranty and Support

8.1 Warranty Information

The Philips HC5610/15 Hair Clipper comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use conditions.

Additionally, Philips offers a 90-day satisfaction guarantee. If you are not satisfied with the product within 90 days of purchase, you may be eligible for a refund. For more details, please visit the official Philips website or refer to your purchase documentation.

Image 4: Promotional image highlighting the 2-year warranty and 90-day satisfaction guarantee for the Philips HC5610/15 Hair Clipper.

8.2 Customer Support

For further assistance, product registration, or warranty claims, please contact Philips customer support or visit their official website:

• Philips Official Website: www.philips.com
• Refer to your product packaging for local contact information.