Inlight IN-0201-13-WH 24-inch Hardwired LED Under Cabinet Lighting Instruction Manual

Product Overview

The Inlight IN-0201-13-WH is a 24-inch hardwired LED under cabinet lighting fixture designed to provide efficient and dimmable illumination. This unit features a soft white (3000K) color temperature, a matte white finish, and is ETL listed for safety. Its slim 1-inch profile ensures discreet integration under cabinets, offering both task and accent lighting.

• Hardwired Only: This fixture is designed for hardwired installation only; no plug-in option is available.
• Dimensions: 24 inches (length) x 3.5 inches (width) x 1 inch (height).
• Light Output: 12-watt built-in LED module, providing 850 lumens (comparable to a 96-watt incandescent bulb).
• Color Temperature: Soft White (3000K) with a 90 CRI for accurate color rendering.
• Dimmable: Compatible with most standard wall-mount LED dimmer switches.
• Safety: ETL listed for safe operation.

Safety Information

Please read and understand all instructions before beginning installation. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Disconnect power at the circuit breaker before installation or servicing. This fixture is for indoor use only and is hardwired only. Do not attempt to modify the wiring or use with a plug-in cord unless explicitly stated in the product specifications.

What's in the Box

The package includes the following components:

• (1) LED Under Cabinet Lighting Fixture
• (1) Strain Relief
• (2) Wood screws
• (1) Installation instruction manual

Setup and Installation

This Inlight LED under cabinet light is designed for hardwired installation. Ensure power is disconnected at the circuit breaker before proceeding. The fixture features multiple knockouts for optimized hardwire installation, allowing flexibility in wiring entry points.

Installation Steps:

1. Prepare the Fixture: Remove the two small screws on the face of the fixture to access the wiring compartment.
2. Access Wiring: Remove the backplate to expose the internal wiring.
3. Pop Out Knockout: Use a screwdriver to pop out one of the knockouts on the rear access cover, corresponding to your desired wire entry point.
4. Install NM Cable Connector: Take off the lock nut from the non-metallic cable connector. Attach the connector to the rear access cover through the popped-out knockout.
5. Feed and Strip Wires: Feed the house wires through the connector. Strip approximately 3/8 inch of insulation from the wires.
6. Tighten Connector: Tighten the screws on the NM cable connector to secure the wires.
7. Reinstall Cover: Arrange the wires neatly inside the fixture and reinstall the rear access cover.
8. Connect Wires: Connect the house wires to the fixture's wires using wire nuts: black to black (hot), green or bare copper to green (ground), and white to white (neutral). Ensure all connections are secure.
9. Mount to Cabinet: Mount the fixture to the underside of the cabinet using the provided screws. Ensure the fixture is flush and securely attached.
10. Add Screw Caps: Place the provided screw caps over the exposed screw heads for a seamless finish.

Installation Video:

Operating Instructions

The Inlight IN-0201-13-WH under cabinet light is equipped with a rocker switch for easy operation and dimming control.

• Power On/Off: Use the integrated rocker switch to turn the light fixture on or off.
• Dimming: This fixture is dimmable with most standard wall-mount LED dimmer switches. Adjust the dimmer switch on your wall to achieve the desired brightness level.

Maintenance

To ensure optimal performance and longevity of your Inlight LED under cabinet light, follow these simple maintenance guidelines:

• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals that may damage the finish or electrical components.
• LED Module: The LED module is built-in and not user-replaceable. Do not attempt to open or service the LED module.
• Inspection: Periodically inspect the fixture and wiring for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

Troubleshooting

If you encounter any issues with your Inlight LED under cabinet light, refer to the following troubleshooting tips:

• Light Not Turning On:
  • Check the circuit breaker to ensure power is supplied to the fixture.
  • Verify that the rocker switch on the fixture is in the 'ON' position.
  • Ensure all wiring connections are secure and correctly matched (black to black, white to white, ground to ground).
• Light Flickering or Dimming Incorrectly:
  • Confirm that the dimmer switch used is compatible with LED lighting.
  • Check for loose wiring connections at the fixture or the dimmer switch.
  • Ensure the dimmer switch is set to an appropriate level; very low settings might cause flickering with some LED dimmers.
• Unusual Noise or Smell:
  • Immediately disconnect power at the circuit breaker.
  • Contact a qualified electrician for inspection and repair. Do not attempt to fix it yourself.

Specifications

Warranty and Support

This Inlight LED under cabinet light is covered by a manufacturer-and-seller-combination warranty. For specific warranty terms, claims, or technical support, please refer to the contact information provided in your product packaging or visit the GETINLIGHT official website.