somfy 1003310

Somfy Sonesse Ultra 30 Wirefree 12V RTS Shade Motor Instruction Manual

Model: 1003310

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your Somfy Sonesse Ultra 30 Wirefree 12V Rechargeable Lithium-Ion RTS Shade Motor. This motor is designed to provide quiet and efficient automated control for various window coverings, utilizing Somfy's Radio Technology Somfy (RTS) for wireless communication.

Somfy Sonesse Ultra 30 Wirefree Motor

Image: The Somfy Sonesse Ultra 30 Wirefree 12V Rechargeable Lithium-Ion RTS Shade Motor, a cylindrical silver unit designed for automated shade operation.

2. Safety Information

Please read all safety warnings and instructions carefully before installing or operating the motor. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Ensure all electrical connections are made by a qualified professional if required.
  • Do not expose the motor to water or excessive moisture.
  • Keep hands and loose clothing clear of moving parts during operation.
  • Do not allow children to play with the motor or remote control.
  • Use only Somfy-approved accessories and replacement parts.
  • Disconnect power before performing any maintenance or repair.

3. Setup and Installation

3.1. Unpacking and Inspection

Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Contact your supplier immediately if any parts are missing or damaged.

3.2. Crown and Drive Installation

Attach the appropriate crown and drive wheel to the motor head. The crown engages with the inside of the shade tube, and the drive wheel fits into the tube's groove. Ensure they are securely fastened according to the specific shade system's instructions.

3.3. Motor Insertion into Tube

Slide the motor, with the crown and drive attached, into the shade tube. Ensure the motor is fully seated and aligned within the tube. The motor should fit snugly to prevent slippage during operation.

3.4. Mounting the Shade Assembly

Install the complete shade assembly (tube with motor) into the mounting brackets. Ensure the brackets are securely fastened to the wall or ceiling and that the shade is level and free to move without obstruction.

3.5. Initial Charging

Before first use, fully charge the motor's integrated Lithium-Ion battery. Connect the Somfy charger (sold separately) to the charging port on the motor. A full charge typically takes several hours. Refer to the charger's instructions for specific charging indicators.

3.6. Remote Control Pairing

To operate the motor, it must be paired with a compatible Somfy RTS remote control. Follow the instructions provided with your remote control to initiate the pairing process. Typically, this involves pressing a programming button on the motor or remote, followed by a button on the new remote to link them.

4. Operating Instructions

4.1. Basic Operation

Once paired, your Somfy RTS remote control will allow you to operate the shade motor.

  • UP Button: Press to raise the shade.
  • DOWN Button: Press to lower the shade.
  • STOP/MY Button: Press to stop the shade at any desired position. If the shade is stopped, pressing this button will send it to a pre-programmed

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.