INFANS 2-in-1 Convertible Bassinet Pram Stroller User Manual

1. Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your INFANS 2-in-1 Convertible Bassinet Pram Stroller. Please read all instructions carefully before use and retain this manual for future reference. This stroller is designed for infants and toddlers, offering a convertible bassinet and seat configuration.

2. Safety Information

WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

• Always use the 5-point safety harness to secure your child in the stroller.
• Never leave your child unattended in the stroller.
• Ensure the stroller is fully open and locked before placing a child inside.
• Do not overload the storage basket. Maximum capacity is 6.6 pounds (3 kg).
• Do not hang bags or other items on the handle, as this can cause the stroller to tip over.
• Engage the parking brake whenever the stroller is stationary.
• Avoid placing hot liquids in the cup holder.
• This stroller is not compatible with car seats.
• The maximum weight recommendation for the child is 33 pounds (15 kg).
• Keep children clear of moving parts during adjustment or folding.

3. Package Contents

Verify that all components are present before assembly:

• Stroller Frame
• Convertible Bassinet/Seat Unit
• Wheels (Front and Rear)
• Zippered Foot Cover
• Cup Holder
• Baby Cushion
• Mosquito Net
• Storage Bag
• Stroller Wrist Strap
• Instruction Manual

4. Assembly Instructions

Follow these steps to assemble your INFANS stroller. Refer to the included diagrams for visual guidance.

1. Unfold the Frame: Release the folding latch and carefully unfold the stroller frame until it locks into place. Ensure all locking mechanisms are engaged.
2. Attach the Wheels: Insert the front and rear wheels into their respective slots on the frame until they click securely. Ensure wheels rotate freely.
3. Install the Bassinet/Seat Unit: Align the bassinet/seat unit with the connectors on the frame and press down firmly until it locks into position. Verify it is securely attached by gently pulling upwards.
4. Attach Accessories: Install the cup holder, mosquito net, and storage bag as desired. The zippered foot cover can be attached to the bassinet/seat unit for warmth.

Figure 4.1: Fully assembled INFANS stroller.

Figure 4.2: Key features including the detachable safety handrail, 5-point safety harness, quick brake, and large storage basket.

5. Operating Instructions

5.1 Adjusting the Bassinet/Seat Unit

The 2-in-1 unit can be adjusted to various positions to suit your child's needs, from a sleeping bassinet to a sitting position.

• Sleeping Basket (180°): Ideal for newborns and infants.
• Semi-Recline (150°): Suitable for resting or slightly elevated comfort.
• Sitting Position (120°): For older infants and toddlers who can sit unassisted.

To adjust, locate the adjustable belt or lever under the sleeping basket and manipulate it to achieve the desired angle. Ensure the unit locks securely into each position.

Figure 5.1: Different angle adjustments for the bassinet/seat unit.

5.2 Reversing the Seat Direction

The bassinet/seat unit can be reversed to allow your child to face you or face forward.

1. Ensure your child is removed from the stroller before reversing the seat.
2. Locate the release buttons or levers on both sides of the bassinet/seat unit where it connects to the frame.
3. Press the buttons/levers and lift the unit off the frame.
4. Rotate the unit 180 degrees and re-attach it to the frame, ensuring it clicks securely into place in the desired direction.

Figure 5.2: The bassinet/seat unit can be reversed for parent-facing or forward-facing.

5.3 Canopy Adjustment

The full canopy can be adjusted to provide optimal shade and protection from UV radiation and weather conditions.

• Gently push or pull the canopy to extend or retract it.
• The three-section design allows for flexible adjustment.

Figure 5.3: Adjustable full canopy for sun and weather protection.

5.4 Wheel Operation and Brakes

The front wheels feature 360° rotation for maneuverability and can be locked for straight-line travel. The rear wheels have a one-touch parking brake.

• Front Wheel Lock: To lock the front wheels in a straight direction, press down the lever located above each front wheel. To allow 360° rotation, pull the lever up.
• Parking Brake: To engage the parking brake, press down on the red pedal located near the rear wheels. Ensure both rear wheels are locked. To release, lift the pedal. Always engage the brake when the stroller is stationary.

Figure 5.4: Front wheel rotation lock and anti-skid rear wheels.

5.5 Folding the Stroller

The stroller is designed for easy folding for storage and transport.

1. Ensure the bassinet/seat unit is in the forward-facing position and fully upright or slightly reclined, depending on the folding mechanism.
2. Engage the parking brake.
3. Locate the folding release mechanisms (usually levers or buttons on the handle or frame).
4. Follow the specific folding sequence as indicated by the product's design, typically involving pressing buttons and pushing the handle forward or down.
5. Secure the folding latch to keep the stroller in its compact folded state.

Figure 5.5: Stroller dimensions and folded configuration.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your stroller.

• Frame Cleaning: Spot clean the aluminum alloy frame with a damp cloth and mild soap. Do not use abrasive cleaners.
• Fabric Care: The fabric cover and cushion can be machine washed. Refer to the care label for specific washing instructions (e.g., cold water, gentle cycle). Air dry thoroughly.
• Wheel Maintenance: Periodically check wheels for debris and ensure they rotate smoothly. Lubricate axles if necessary.
• Safety Harness: Inspect the 5-point safety harness regularly for wear and tear. Ensure buckles function correctly.
• Storage: Store the stroller in a dry, cool place away from direct sunlight when not in use.

7. Troubleshooting

If you encounter issues with your stroller, refer to the following common solutions:

• Stroller does not fold/unfold smoothly: Check for any obstructions in the folding mechanism. Ensure all locking latches are disengaged before folding and fully engaged after unfolding.
• Wheels are stiff or squeaky: Clean any debris from the wheel axles. Apply a small amount of silicone-based lubricant to the moving parts of the wheels.
• Brake not engaging: Ensure the brake pedal is fully depressed. Check for any obstructions preventing the brake mechanism from engaging the wheels.
• Bassinet/Seat unit not attaching securely: Verify that the unit is correctly aligned with the frame connectors and pressed down until it clicks into place. Ensure no fabric or debris is blocking the connection points.

If problems persist, contact INFANS customer support for assistance.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please contact INFANS directly through their official website or the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.