EverNice FC-143

EverNice FC-143 Universal Foot Control Pedal Instruction Manual

Model: FC-143 | Brand: EverNice

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of the EverNice FC-143 Universal Foot Control Pedal with Light and Motor Block. This product is designed as a replacement part for various home sewing machines, providing speed control and motor power.

2. Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Ensure the power supply voltage (110/120V) matches your local electrical standards.
  • Always unplug the sewing machine from the power outlet before installing, removing, or performing any maintenance on the foot control pedal.
  • Do not use the pedal if the cord is damaged or frayed.
  • Keep the pedal away from water or other liquids.
  • This product is for indoor use only.
  • Do not allow children to operate the sewing machine unsupervised.

3. Package Contents

Verify that all components are present in the package:

  • 1 x EverNice FC-143 Universal Foot Control Pedal with Cord (110/120V)
  • 1 x Light and Motor Block
EverNice FC-143 Universal Foot Control Pedal with Light and Motor Block

Figure 1: The EverNice FC-143 Universal Foot Control Pedal, showing the pedal unit, integrated light, and motor block with power cord.

4. Compatibility

The EverNice FC-143 foot control pedal is compatible with a wide range of home sewing machine models. Please check your sewing machine's model number against the list below to ensure compatibility. This pedal is also known by alternate part number 001002409.

Compatible Sewing Machine Models:

  • Alphasew: PW200, PW200-ZZ, PW400, PW400-ZZ
  • Alco: 7419
  • Brother: 1681, 221A Galaxie, 320, 360, 451, 461, 661, 681, 741, 751, 761, 1781, XL1351, XL1561, XL706, XL711, XL781, XL791, XL851
  • Dressmaker: 495, 7000, S-1000, S-3000
  • Domestic: 468
  • Home Maker: 2345-TW
  • Good HouseKeeper: 555
  • Janome (New Home): 444, 532, 556, 592, 670, 692
  • Montgomery Wards: 7 Jewel, R103, UHT1261, UHT-J1414, UHT-J1276
  • Morse: 300, 350, 600, 4100, 4300, 4400, Duo-Matic, MZZ, Power Stitch, Zig Zag
  • Necchi: 512 Lelia, 513 Lelia, 514 Lelia, 534, 536, 574
  • Riccar: 555FB, 555SU, 666FA, 666SU, 606, 706, 707, 7500, 777, 800R, R916, RZ208-B, RM750, SZ702
  • Singer: 3503, 3507, 3508, 3514, 3515
  • Universal: KNS, Super Deluxe 142-B, UNL-60
  • White: 1065, 1066, 1088, 1365, 1563, 1776 Super ZigZag, 530, 568, 620, 622

5. Setup and Installation

Follow these steps to properly install the EverNice FC-143 foot control pedal:

  1. Unplug the Sewing Machine: Before beginning, ensure your sewing machine is completely unplugged from the electrical outlet. This is a critical safety step.
  2. Locate the Pedal Port: Identify the port on your sewing machine where the original foot control pedal was connected. This is typically a multi-pin receptacle.
  3. Connect the Motor Block: The EverNice FC-143 comes with an integrated light and motor block. Carefully align the connector from the motor block with the corresponding port on your sewing machine. Push firmly until it is securely seated.
  4. Position the Foot Pedal: Place the foot pedal on the floor in a comfortable position where you can easily operate it with your foot. The non-slip pads on the bottom of the pedal help keep it stable during use.
  5. Connect to Power: Once the pedal and motor block are securely connected to the sewing machine, plug the main power cord of the foot control pedal into a standard 110/120V electrical outlet.
  6. Test Functionality: Plug in your sewing machine's main power cord (if separate) and turn on the machine's power switch. Gently press the foot pedal to ensure the machine operates smoothly and the speed responds to pedal pressure.

6. Operating Instructions

The EverNice FC-143 foot control pedal provides variable speed control for your sewing machine. It is a single-speed unit, meaning the motor speed is directly proportional to the pressure applied to the pedal.

  • Start Sewing: With the sewing machine powered on, gently press down on the foot pedal. The machine will begin to sew.
  • Control Speed: Increase pressure on the pedal to increase the sewing speed. Reduce pressure to decrease the speed. Releasing the pedal completely will stop the machine.
  • Consistent Pressure: For best results and consistent stitching, try to maintain steady pressure on the pedal.

7. Maintenance

The EverNice FC-143 foot control pedal requires minimal maintenance to ensure long-lasting performance.

  • Cleaning: Periodically wipe the pedal and cords with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners or immerse the pedal in water.
  • Cord Inspection: Regularly inspect the power cord and connecting cables for any signs of damage, cuts, or fraying. If damage is found, discontinue use immediately and replace the unit.
  • Storage: When not in use, store the pedal in a clean, dry place, away from extreme temperatures and direct sunlight. Avoid coiling the cord too tightly.

8. Troubleshooting

If you encounter issues with your EverNice FC-143 foot control pedal, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Pedal does not operate the machine.
  • Not properly plugged into the wall outlet.
  • Not properly connected to the sewing machine.
  • Sewing machine power switch is off.
  • Damaged cord or pedal.
  • Ensure the pedal's power cord is securely plugged into a live electrical outlet.
  • Verify the motor block connector is firmly seated in the sewing machine's port.
  • Turn on the sewing machine's main power switch.
  • Inspect cords for damage. If damaged, replace the unit.
Inconsistent or erratic speed control.
  • Loose connection.
  • Internal pedal issue.
  • Check all connections for tightness.
  • If the problem persists, the pedal may be faulty and require replacement.
No light from the motor block.
  • Light bulb failure (if replaceable).
  • Internal wiring issue.
  • Consult your sewing machine's manual for light bulb replacement instructions, if applicable.
  • If the light is integrated and not user-replaceable, and the pedal functions otherwise, this may indicate an internal fault.

9. Specifications

  • Model: FC-143
  • Voltage: 110/120V
  • Function: Foot Control Pedal with Light and Motor Block
  • Speed Control: Single Speed (variable via pressure)
  • Alternate Part Number: 001002409

10. Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

For further assistance, you may visit the EverNice Store on Amazon: EverNice Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.