Augmented Vision Labs S5 Mini Scleral & Hybrid Lens Insertion System

1. Introduction

The Augmented Vision Labs S5 Mini is a specialized device designed to assist with the insertion of scleral and hybrid contact lenses. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your S5 Mini to ensure a safe and effective lens insertion experience.

The S5 Mini features hands-free lens stabilization and a built-in LED light target to facilitate accurate lens placement and minimize common insertion challenges such as blinking and air bubbles.

2. Product Overview and Components

The S5 Mini consists of several key components designed for optimal functionality. Familiarize yourself with each part before use.

Figure 1: S5 Mini Components. This image displays the S5 Mini device with its main parts clearly labeled: the Lens Holder, Lens Holder Dock, Light Unit, Base Lever, and Suction Base.

• Lens Holder: The top part where the contact lens is placed.
• Lens Holder Dock: Connects the lens holder to the light unit.
• Light Unit: Contains the LED light for targeting.
• Base Lever: Used to engage and disengage the suction base.
• Suction Base: Secures the device to a flat surface for hands-free operation.

3. Setup

1. Charge the Device: Ensure the S5 Mini is fully charged. It requires 1 Lithium Ion battery (included). Connect the charging cable to the device and a power source.
2. Prepare Your Workspace: Choose a clean, well-lit, and stable flat surface for lens insertion. Ensure you have all necessary supplies, including your contact lenses, saline solution, and any prescribed eye drops.
3. Secure the S5 Mini: Place the S5 Mini on your chosen flat surface. Press down firmly on the device while pushing the Base Lever down to engage the suction base, securing it in place.
4. Wash Your Hands: Always wash your hands thoroughly with soap and water and dry them with a lint-free towel before handling your contact lenses or the S5 Mini.
5. Activate the LED Light: Turn on the S5 Mini's LED light. This light will serve as your focal point during insertion.

4. Operating Instructions

4.1. Lens Insertion

1. Place the Lens: Carefully place your scleral or hybrid contact lens onto the Lens Holder of the S5 Mini. Ensure the lens is correctly oriented (cup-side up).
2. Fill with Saline: Fill the bowl of the contact lens with preservative-free saline solution. Fill it completely to prevent air bubbles during insertion.
3. Position Yourself: Lean over the S5 Mini, bringing your head close to the device. Use both hands to hold your eyelids wide open, ensuring your eyelashes are out of the way. This hands-free stabilization is crucial to prevent blinking and provide a clear path for the lens.
4. Focus on the LED: Look directly at the LED light target within the lens. Maintain your focus on this light as you slowly lower your head towards the lens.
5. Gentle Contact: Continue lowering your head until the lens gently makes contact with your eye. The saline solution will help the lens adhere.
6. Release Eyelids: Once the lens is securely on your eye, slowly release your eyelids. Blink gently to settle the lens.

Figure 2: Proper posture for lens insertion using the S5 Mini. The user leans over the device, holding their eyelids open with both hands, focusing on the lens.

Figure 3: Contact lens on the S5 Mini with LED target. This image shows a contact lens filled with saline on the device, highlighting the central LED light for precise alignment.

Video: Scleral Lens Insertion with the S5 Mini

4.2. Lens Removal

The S5 Mini is primarily designed for lens insertion. For safe removal of scleral or hybrid contact lenses, follow the instructions provided by your eye care professional. General best practices for contact lens removal include:

• Always wash and dry your hands thoroughly before touching your eyes or lenses.
• Use a clean, soft, lint-free cloth or tissue to gently dry your fingers.
• Look straight ahead into a mirror.
• Using the pad of your index finger, gently pull down your lower eyelid.
• Using the pad of your thumb and index finger, gently pinch the lens at the bottom edge and lift it off your eye.
• If you experience difficulty, apply a few drops of rewetting solution to lubricate the eye and lens before attempting removal again.

5. Maintenance

1. Cleaning the S5 Mini: After each use, gently wipe the Lens Holder and any parts that came into contact with your lens or saline solution with a clean, lint-free cloth or an alcohol prep pad. Ensure no residue remains.
2. Storage: Store the S5 Mini in a clean, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use.
3. Battery Care: Recharge the device as needed. Avoid overcharging or completely draining the battery to prolong its lifespan.
4. Regular Inspection: Periodically inspect the device for any signs of wear, damage, or debris. If any damage is observed, discontinue use and contact customer support.

6. Troubleshooting

• Lens Not Adhering to Eye:
  • Ensure the lens is completely filled with saline solution.
  • Verify that your eyelids are held wide open and eyelashes are clear.
  • Maintain focus on the LED light throughout the insertion process.
• Air Bubbles Under the Lens:
  • Ensure the lens is completely filled with saline solution without any trapped air.
  • Lower your head slowly and steadily, keeping your eye aligned with the lens.
  • If bubbles persist, remove the lens, rinse, refill with saline, and reattempt insertion.
• LED Light Not Working:
  • Check the battery level and recharge the device if necessary.
  • Ensure the device is properly assembled and the light unit is securely connected.
• Device Not Suctioning to Surface:
  • Ensure the surface is clean, dry, and smooth.
  • Press down firmly on the device while engaging the Base Lever.

If you continue to experience difficulties, please utilize the unlimited 1-on-1 training included with your device. Expert assistance is available 365 days a year via FaceTime and Zoom video calls.

7. Specifications

8. Warranty and Support

90-Day Money-Back Guarantee: The S5 Mini includes a 90-day, full money-back guarantee from the date of purchase.

Unlimited 1-on-1 Training: Every S5 Mini device comes with unlimited 1-on-1 insertion and removal training with an expert at no extra charge. Training is available 365 days a year via FaceTime and Zoom video calls to ensure you achieve success with your device.

Contact Support: For any questions, technical assistance, or to schedule your training session, please contact:

• Email: support@augmentedvisionlabs.com
• Website: augmentedvisionlabs.com